Maestro
Please review the Maestro Service Bulletin prior to updating the software.


Maestro software update procedures:

1. Install Maestro software package by running “MaestroInstall.exe” from the distribution CD. This will uninstall the previous Maestro version and install the new version.
2. Remove old and install new Maestro Jupiter Router Service on Jupiter PC if it’s a separate PC.
3. Re-compile the configuration file in Maestro Configuration editor.
4. Update the System configuration and software from Maestro Deployment Control Center.
5. Verify and update bootrom code and FPGA/CPLD versions through Maestro Deployment Control Center.

Verify the bootrom code

1. In the board Status section of the Maestro Deployment control center, select the board you want to check.
2. Right-click on the "Runing" FPGA field for this board. This will display the FPGA/CPLD update menu.
3. The first item should be the bootrom version.

To update the bootrom code

1. Telnet into the board from the Maestro Deployment Control Center.
2. Enter: stopSystem (return).
3. Enter: ixProgramBootRom "/ram/current/bootrom.bin" (return).
4. Reset the board from Maestro Deployment Control Center.

Update Maestro FPGAs and CPLDs

1. In the board Status section of the Maestro Deployment control center, select the board to update.
2. Right-click on the "Runing" FPGA filed for this board. This will display the FPGA/CPLD update menu.
3. Check the "Update' boxes and select "Update". Answer "yes" to confirm.
   
   
   
   Maestro
   Version 1.7.1