• Distributing HD/3G signals or mixed HD/3G and SD format installations
• Installations where an SD to HD/3G update is planned
• Installations where highest density is required at the lowest cost
• For optimizing and adapting trade-off between number of DAs and number of outputs

Supported Frame Types
GeckoFlex frame

Power Rating
3.8 Watts – single slot

Inputs
HD/SD-SDI: Two electrical inputs (J9 and J10)

• Input equalization (Belden 1694A cable):
  • 90m for 3 Gb/s (Input 1, J9)
  • 100m for 3 Gb/s (Input 2, J10)
  • 140m for 1.5 Gb/s
  • 400m for 270 Mb/s
• Return loss: >15 dB up to 1.5 Gb/s, 10 dB (typical) up to 3 Gb/s

Formats supported:

• SD-SDI
• HD-SDI
• 3G-SDI
• DVB ASI

Outputs
HD/SD-SDI: Eight reclocked electrical outputs (in four output pairs: J1/J2, J3/J4, J5/J6 and J7/J8)

• Return loss: >15 dB up to 1.5 Gb/s, >10 dB to 3 Gb/s
• Signal level: 800 mV ±10%
• Output jitter (for inputs conforming to SMPTE 259M and 292M standards):
  • <0.2 UI >100 kHz for 3G
  • <0.2 UI >100 kHz for HD
  • <1.0 UI 10 Hz – 100 kHz for HD
  • <0.2 UI 10 Hz – up for SD

DVB ASI: Eight non-inverted outputs (four output pairs)

Distribution
Reclocking: Active/bypass
Input format selection: Auto/manual
Input to output mapping: Both inputs are active at the same time and are configurable to any output pair (one input per electrical output pair).
Electrical length (input to output latency in ns):

• CH1: Input J9 to Output J1:
  • 3G: Reclocked: 3.8 ns, Bypassed: 3.55 ns
  • HD: Reclocked: 4.0 ns, Bypassed: 3.6 ns
  • SD: Reclocked: 6.0 ns, Bypassed: 4.0 ns
• CH2: Input J10 to Output J1:
  • 3G: Reclocked: 4.0 ns, Bypassed: 3.75 ns
  • HD: Reclocked: 4.1 ns, Bypassed: 3.7 ns
  • SD: Reclocked: 6.2 ns, Bypassed: 4.25 ns

Control and Monitoring
SNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton™ support: Yes
NetConfig™ support: Yes
NetCentral® support: Yes