The 8949MDA-CFR is a monitoring distribution amplifier with PAL/NTSC monitoring outputs. This module is ideal for low-cost monitoring of HD-SDI signals. The 8949MDA-CFR provides four monitoring outputs and four reclocked outputs and can be used to distribute either HD-SDI or SD-SDI making it ideal for mixed format applications or installations where an upgrade is planned.
Thanks to its fiber-ready architecture the 8949MDA-CFR can be configured to support up to two fiber connections in addition to its eight coax outputs. Applications include use as an HD-SDI fiber transmitter with additional monitoring and reclocked coax feeds.
Parameters can be adjusted directly from the module itself or via standard HTML Web browsers or via the Newton™ control panel (when installed in network equipped frames). In addition, NetConfig™ and NetCentral® can be used for remote configuration and signal health monitoring.
Please note that the 8949MDA-CFR provides 16:9 anamorphic monitoring outputs for HD signals and 4:3 outputs for SD inputs. The 8949MDA-SFR should be selected if an SDI monitoring output is required. This is a monitoring device so, in order to provide the fastest possible conversion, the module does not perform de-interlacing and consequently it has an extremely short processing delay of 0.97 ms.

Supported Frame Types
GeckoFlex frame
Power Rating
8.5 Watts – single slot
Inputs
HD/SD-SDI:
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94 (NTSC) 576i @ 50 (PAL-B)
Outputs
HD/SD-SDI: Four outputs
Return loss: >15 dB, 5 to 270 MHz; >10 dB to 1.5 GHz
Optical: Single-mode (optional)
Analog video: Four outputs (75Ω)
Electrical Length (Delay)
0.97 ms
Conversion
9 bits representation
Type: Field-based high speed monitoring to drive 16:9 monitors
Input formats: 59.94 Hz, 1080i @ 59.94 Hz, 720p @ 59.94 Hz, 480i @ 59.94 Hz
Input formats: 50 Hz, 1080i @ 50 Hz, 720p @ 50 Hz, 576i @ 50 Hz
Manual input selection: Coax In, fiber 1, fiber 2 (with optional fiber input)
Input format selection: Automatic/manual
Control And Monitoring
SNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton™ support: Yes
NetConfig™ support: Yes
NetCentral® support: Yes
GeckoFlex 8949MDA-CFR PAL/NTSC Monitoring Distribution Amplifier Data Sheet
|
|||
![]() |
|||