The 8981NR is a 270 Mb/s SDI component digital noise reducer module. This module incorporates two different noise reduction methods that are targeted at different sources of noise. A recursive filter is effective for low levels of wide-band (random) variations that have no frame-to-frame correlation, and a horizontal median filter is very effective for impulse noise. Typical applications include reduction of random noise generated during analog transmission or digital processing. Signals from various sources with varying amounts of noise resulting from poor transmission and processing will greatly benefit from using this product by reducing the bandwidth required later during the MPEG compression process.
Supported Frame Types
GeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating
4.5 Watts – single slot
SDI Input
Connector: BNC
Input impedance: 75Ω terminating
Signal type: SMPTE 259M serial 10-bit 4:2:2 component video
Return loss: >15 dB up to 270 MHz
SDI Output
Connector: 4X BNC
Signal type: SMPTE 259M
Output impedance: 75Ω
Return loss: >15 dB, 5 to 270 MHz
Error checking: EDH embedded
Environmental Conditions
Operating ambient temperature (frame): 0° to 45°C
Operating humidity range: 0% to 90% non-condensing
Frame | Control and Monitoring | Converters | Decoders/Encoders | Distribution Amplifiers | Frame Synchronizers | Noise Reduction | Multiplexers/Demultiplexers | Genlock | Protection Switches | Fiber-Optic Modules | Modular Control System |