Densité 3+ FR1 Frame
Compact 1 RU Frame for Four Modules
The 1 RU Densité 3+ FR1 Frame offers true multiformat operation, with the ability to process simultaneously 3G, HD, SD and analog video, as well as AES and analog audio. The frame provides advanced monitoring and backup capabilities. It can be fitted with 3 RU and 2 RU (using an extender panel) Densité modules. The frame features dual hot-swappable power supplies and fans. The modules for the frame are also hot-swappable. The frame is air-cooled and all modules, redundant PSUs and fans are monitored to provide status via GPI or the Ethernet port. The basic frame configuration includes one PSU and a controller card, which allows card adjustments from the front panel. Front panel multicolor...
FEATURES
- Multiple video and audio formats can be fitted in a single chassis
- Up to 4 cards in a single 1 RU frame, including an additional system slot
- Low noise operation
- Backwards compatible with Densité 2 or Densité 3 modules
- Easy configuration from the front panel or remotely via Ethernet
- Remote control by PC-based GV Orbit and iControl
- Two hot-swappable power supplies
- Supports full range of interfacing, distribution and monitoring modules
- Can be stacked without additional cooling spaces
- Redundant Ethernet connection
When configured with REF-1801-D3+FR1 module:
- Digitally generated reference for intra-frame distribution
- Timecode extraction and embedding
- Supports SMPTE ST 318 for perfect audio/video phasing
- Easy control and monitoring
- URS simplifies interformat processing
SPECIFICATIONS
Mechanical
- Dimensions 1 RU x 485 mm (19 in.) x 286 mm (11.25 in.) with connectors
- Weight 3.3 kg (7.2 lbs.) with 1 PSU and controller card install
Power
- Input range AC 50-60 Hz, 100-240V
- Rating 150W max
- Operating temp. range 0-40° C (32°-104° F)
- Alarm GPI contact
Control and Monitoring
- Communication ports 2x Ethernet 10/100 BASE-T
Cooling
- Fans:
- 2 on frame, serviceable
- 1 on each PSU
REF-1801-D3+FR1 Module
Reference Input
- Load: Passive loop-through
- Impedance: 75Ω bridging
- Return loss: >30 dB up to 30 MHz
- Signal type: Composite NTSC-M, PAL-B blackburst with optional VITC
- Standard: SMPTE ST 170, ITU-R BT.1700-1, SMPTE ST 318
- Signal level: 1 Vp-p
- Signal type: HD tri-level sync
- Standard: SMPTE ST 274, SMPTE ST 296
- Signal level: 600 mVp-p
- Signal type: DARS AES-11 (48 kHz sampling frequency only)
- Standard: SMPTE ST 276
- Signal level: 1 Vp-p
- Signal type: Word Clock
- Standard: AES-11 Annex B (Informative)
- Signal level: 2 Vp-p
LTC-IN
- Signal type: LTC
- Standard: SMPTE ST 12
- Signal level: 0.5 Vp-p to 4.5 Vp-p
Electrical
- Power: 2.1 W
MEDIA GALLERY
ORDERING INFORMATION
| Densité 3+ FR1 | 1 RU modular frame, 4 slots, 2 power supplies, controller card with redundant Ethernet ports and front control panel, blank rear panels. |
| Note: Rear panels must be specified and ordered with appropriate card. | |
| Options | Description |
| REF-1801-D3+FR1 | Reference module for Densité 3+ FR1 Frame with rear |
| Densité-CPU-ETH2-OPT-LINK | Full link redundancy using channel bounding on Densité-CPU-ETH2 |
| Remote control | |
| GV Orbit | Configuration, control and monitoring |
| iControl Solo | Standalone remote control software |
