MADI Optical to Electrical / Electrical to Optical Converters

The FIO-991p-MADI-RT-x13-LC are flexible, serial digital video to/from fiber converters which are designed to transport MADI signals. The FIO-991p Series uses hot swappable SFP modules for ease of maintenance. A convenient picoLink tray is available to mount up to 10 FIO-991p converters which provides up to 20 optical connections.

  • Convenient standalone fiber interfaces
  • Ideal for long runs with hum immunity
  • Presence/loss of signal alarm on a LED
  • Optical power level measurement (receiver only) on a LED (green, yellow, red)
  • The SFP modules are fully hot swappable
  • Supports 100 Mb/s payload on a 125 Mb/s transport
  • Multimode model conforms to FDDI standard (ISO/IEC 9314-3), except for fiber connectors
  • Provides unidirectional or bidirectional interface between electrical and optical MADI interfaces
  • Combined Rx/Tx configuration covers unidirectional or bidirectional requirements
  • Two MADI optical and two MADI coaxial ports
  • Coaxial I/O supported for more than 100m (328 ft.)
  • Optical I/O supported for up to 2,000m (6,561 ft.) on multimode fiber
  • Optical I/O supported for up to 10 km (6.21 mi.) on single-mode fiber
  • Both inputs are equipped with status LEDs
  • Any input signal will pass through absolutely unaltered
  • Supports any format whether 56 or 64 channels, including special invisible control commands, any sample rate and even out-of-spec data rates or violations of the MADI protocol
  • Signal: Supports data rate of 125 ±12.5% Mb/s
  • MADI compliant electrical signal, AES10-2008
  • Connectors: 75Ω BNC (IEC 60169-8, Annex A)
  • Return loss:≥15 dB up to 150 MHz
  • Cable length (Belden 8281 or 1694A): 100m (325 ft)
  • Signal amplitude: 150 to 1200 mV p-p
  • 4V p-p tolerant
  • Impedance: 75Ω ±2Ω
  • Amplitude: 550 ±50 mV p-p
  • Rise/fall time: Between 1 and 3 ns, 20% to 80% amplitude points
  • Optical: ISO/IEC 9314-3 compliant (FDDI)
  • Connectors: LC
  • Fiber type:
    • Operates with 62.5/125 μm multimode fiber, as per FDDI standard (usually blue)
    • Can also operate with 50/125 μm multimode fiber (usually orange)
  • Input level range: -31 to -14 dBm
  • Optical Tx (1310 nm, multimode):
  • Output level: -20 to -14 dBm
  • Connectors: LC
  • Fiber type: 9/125 μm single-mode fiber (usually yellow)
  • Input level range: -31 to -8 dBm
  • Optical Tx (1310 nm, single-mode):
  • Output level: -15 to -8 dBm
  • Voltage: 5 VDC
  • Power: 3W
Product Description
FIO-991p-MADI-RT-M13-LC Multimode MADI optical transceiver
FIO-991p-MADI-RT-S13-LC Single-mode MADI optical transceiver
Other types of SFP Optical Plug-In Cartridges may be available for this product.
Accessories Description
LKS-WSU Power supply for 110V or 220V
Pico-PA 12V to 5V power adapter
pL-Tray 40W rack mounted tray for up to 10 picoLinks

PicoLink Series FIO-991p MADI MADI optical to electrical / electrical to optical converters Datasheet

The FIO-991p Series from Grass Valley, a Belden Brand, are flexible, serial digital video to/from fiber converters, which are designed for 3G, HD and SD serial video, as well as compressed bitstreams (DVB-ASI). These converters support any data rate within the range of 19.4 Mb/s to 2.97 Gb/s, and provide reclocked serial digital video from 270 Mb/s to 2.97 Gb/s.

Posted Oct 18 2016 (GVB-1-0372B-EN-DS) File Size: 495.0 KB

Read more »

See more related documents
Sales: USA +1 530 265 1000 / Canada +1 514 333 1772 / LATAM +1 305 213 8503 / EMEA +44 (0)118 952 3400 / Asia +852 2955 3260 / Customer Support
Copyright © 2017 Grass Valley Canada. All rights reserved. Legal Terms Privacy Careers About Us Contact Press View All Products