HCO-1822
Space-saving, modular platform for advanced signal processing.

The HCO-1822 is a 2x1 HD/SD/ASI change-over which supports 16 channels of embedded audio and metadata. Change-overs are performed electronically by the HCO-1822's internal router. The module can perform a video and audio "Clean & Silent Switch" between sources using the CS option. In the event of a power failure, the signal is protected by relays fitted on the rear module, maintaining the integrity of the selected signal at the output. Relays are fully controllable via GPI. Input selection can be performed automatically or manually.

  • Two source inputs and two outputs: program and preview
  • Supports HD (1080i50/59.94, 720p50/59.94) and SD (525, 625)
  • Electronic switching with relay backup (on rear module) maintains selected input with power loss
  • Automatic mode using internal signal analysis with alarm parameters
  • Manual change-over by local frame controller, iControl, iControl Solo or GPI
  • Alarm reporting to iControl facility monitoring and control system
  • Preview output selectable to follow PGM OUT or any of video inputs
  • Compatible with iControl end-to-end A/V fingerprint analyzer for lip sync error detection and measurement
  • GPI I/O (IN 1, IN 2, AUTO, BYPASS)
  • Optional clean switch function (video and 16 channels of audio)
  • GPI outputs give status of selected source for tallies
  • Reference input with passive loop through
  • Two line timing window with CS option
  • Thumbnail and audio level meter streaming
  • Loudness compliant to EBU R128-2014, ATSC A/85:2013 (FCC CALM compliant) and ARIB TR-B32 (ITU-R BS.1770-3)
VIDEO INPUTS (2)
  • Signal:
    • SMPTE ST 259-C (270 Mb/s)
    • SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
    • DVB-ASI, EN50083-9
  • Supported formats:
    • SD: 480i59.94, 576i50
    • HD: SMPTE ST 274: 1080i59.94, 1080i50
    • HD: SMPTE ST 296: 720p59.94, 720p50
  • Cable length: 
    • 200m (656 ft.) Belden 8281 at 270 Mb/s
    • 90m (295 ft.) Belden 1694A at 1.485 Gb/s
  • Return loss: >15 dB up to 1.5 GHz
VIDEO OUTPUT
SD mode
  • Signal (2): SMPTE ST 259-C (270 Mb/s)
  • Supported formats: SD: 480i59.94, 576i50
  • Return loss: >15 dB up to 270 MHz
HD mode
  • Signal (2): SMPTE ST 292 (1.485, 1.485/1.001Gbps)
  • Supported formats:
    • HD: SMPTE ST 274: 1080i59.94, 1080i50
    • HD: SMPTE ST 296: 720p59.94, 720p50
  • Return loss: >15 dB up to 1.0 GHz (PGM out)
  • >12 dB up to 1.5 GHz (PVW out)
  • Jitter: <0.2UI as per SMPTE ST 292
REFERENCE INPUT
  • Signal (1): SMPTE ST 170/SMPTE ST 318/ITU 624-4/BUT 470-6 or comp. sync
  • SMPTE ST 274/SMPTE ST 296 tri-level sync
  • Return loss: >35 dB up to 5.75 MHz
GPI (8)
  • Connector: Weco, opto isolated
  • GPI in (4): Used to select input and card's mode of operation
  • GPI out(4): Used for tallies to gives status of selected input and card's mode of operation
VIDEO PROCESSING PERFORMANCE
  • Signal path: 10 bits
  • Latency: 0.4 ns without CS option
  • Maximum of 2 lines with CS option
AUDIO PROCESSING PERFORMANCE
  • Quantization: 20-24 bits
  • Sampling: 48 kHz, synchronous
  • Number of channels: 16, 4 groups
  • Audio latency: 1 to 2 ms depending on processing options
ELECTRICAL
  • Power: 8W
Densité 2 frame Densité 3 frame Description
HCO-1822 HCO-1822-3RU HD/SD/ASI change-over with clean switch
HCO-1822-DRP-R HCO-1822-DRP-R-3RU Double rear connector panel with bypass relays
 
Optipons Description
HCO-1822-OPT-CS Clean switch option
 
Remote control iControl, iControl Solo, RCP-200

HCO-1822: HD/SD/ASI Change-Over with Clean Switch and ALC Datasheet

The HCO-1822 from Grass Valley, a Belden Brand, is a 2x1 HD/SD/ASI change-over which supports 16 channels of embedded audio and metadata. Change-overs are performed electronically by the HCO-1822's internal router. The module can perform a video and audio "Clean & Silent Switch" between sources using the CS option. In the event of a power failure, the signal is protected by relays fitted on the rear module, maintaining the integrity of the selected signal at the output. Relays are fully controllable via GPI.

Posted Jun 07 2016 (GVB-1-0383B-EN-DS) File Size: 710.0 KB

Read more »

See more related documents
Sales: USA +1 530 265 1000 / Canada +1 514 333 1772 / LATAM +1 305 213 8503 / EMEA +44 (0)118 952 3400 / Asia +852 2955 3260 / Customer Support
Copyright © 2017 Grass Valley Canada. All rights reserved. Legal Terms Privacy Careers About Us Contact Press View All Products