The new generation HDX Plus allows you to extend the distance between the camera’s CCU and HDX Plus over fiber, and supply power from the HDX Plus over SMPTE hybrid cable to the camera. The HDX Plus is compatible with Grass Valley’s LDX range of cameras and Sony cameras.
In addition, when HDX Plus is used with Power Plus 2, it can be matched with any camera manufacturer when either an Anton Bauer or IDX power plate is available. Power Plus 2 replaces the on-board battery and provides up to 200W over 3 km (1.86 mi.) to the camera. HDX Plus is compatible with Shed-BS when SMPTE power is required to be eliminated and converted to a fiber-only connection from CCU to HDX Plus.
Fiber type: Single mode
Note: HDX Plus and Power Plus 2 are optically passive
Dimensions (W x H x D):
HDX Plus a with Power Plus 2: 85-265 VAC, 47- 63 Hz., 450 VA max.
Refer to chart below
* Maximum length of SMPTE cable with power varies with the camera system configuration, lens type, viewfinder type, size of the optical fiber cable and the number of cable connectors
|HDX-PLUS||HDX Plus,with LEMO, for PP2, LDX, Focus and Sony Cameras (UFP added under MTO)|
|UFP Plates||(Customer specifies fiber connector — only 1 allowed)|
|UFP-2LC||Dual LC connector|
|UFP-2SC||2 SC fiber, ultra polished|
|UFP-2SCA||2 SC fiber, angle polished|
|UFP-2STSM||2 ST fiber connectors|
|UFP-MX2||MX dual fiber|
|UFP-NOC2||Neutrik OpticalCon Duo 2 Fibers|
|Optional Waterproof Enclosure|
|HDX-ENCL||HDX Plus waterproof enclosure|
|Power Plus 2|
|PWRPL2-304-V||Power Plus 2 camera power adapter: SMPTE ST 304 dongle & SMPTE ST 304
receptacle on swivel, 17 VDC IDX V mount. HDX Plus required.
|Power Plus 2 camera power adapter: SMPTE ST 304 dongle & SMPTE ST 304
receptacle on swivel, 17 VDC Anton/Bauer mount. HDX Plus required.
HDX Plus & Power Plus 2: Power Solutions for Broadcast Cameras Datasheet