The IQUCP50 is a user configurable multi-channel video over IP transceiver developed for use within low latency and high bandwidth Ethernet IP networks. Using RTP VSF TR-03 (SMPTE ST 2110), TR-04 and SMPTE ST 2022-6 encoding and encapsulation schemes, along with clause 74 FEC, enables the IQUCP50 to encode or decode up to 16 SDI signals and transport them over redundant 50GbE links (SMPTE ST 2022-7) with either dual or single port options.
To enable hardware processing flexibility IQUCP50 has a variety of Software Defined Cores (SDCs) available that can be purchased and loaded as operational needs demand. SDCs can be installed via a licensing mechanism and include; essence processing for SDI to IP gateway type applications, signal monitoring for multi-viewer style applications, network processing for IP transcoding and NAT firewall applications, and signal processing for broadcast quality conversion and processing requirements.
With it’s essence processing SDC IQUCP50 provides frame synchronized SDI outputs along with both uncompressed and compressed (using SMPTE ST 2042 - VC2) modes of IP operation. Encapsulation of signals in a SMPTE ST 2022-6 transport stream is also catered for.
IQUCP50 is fully compatible with Grass Valley’s new broadcast centric IP routing and network management solution designed to migrate Broadcasters from a traditional baseband routing and control environment to new Hybrid SDI and IP workflows.
Supports configuration of Ethernet links for maximum signal transport using both SFPs or for dual-link mode to provide link redundancy as per SMPTE ST 2022-7, and when operating as a receiver will dynamically adapt to any stream presented to it
Supports unicast as well as IGMPv3 source-specific multicast, allowing point-to-point operation or transmission in multicast groups, and forward error correction with either clause 74 (Base-R) or clause 108 (RS) FEC
3G-SDI to SMPTE ST 424/425 level A compatible
HD-SDI to SMPTE ST 292/274/296
SD-SDI to SMPTE ST 259-C
25 GbE Ethernet to IEEE 802.3
RollCall control and monitoring compatible with standard logging and reporting features
Essence Processing (EP) Features
Handles up to 16 SDI signals over dual 50 GbE IP links with dual and single port rear panel options (dependent on SDI signal format and compressed or uncompressed transport mode)
Multiple transport types available for each SDI input including:
Compressed IP transport using SMPTE ST 2042 (VC2) low- latency high-quality encoding profile
Uncompressed video transport using either VSF TR-03 (SMPTE ST 2110) and TR-04 RTP, or SMPTE ST 2022-6 encapsulation
PCM audio using TR-03 & AES67
SMPTE ST 2110-40 metadata support via IETF standard “RTP Payload for Ancillary Data”
Supports frame-synchronized SDI inputs and outputs, with audio rate adaption, referenced to either IEEE-1588v2 (PTP) network timing (compliant with SMPTE ST 2059-2) or via the IQH3B or IQH4B frames analog reference bus for blackburst/tri-level syncs
Includes UHD quad link mode for 3G SSQD or 2SI signal transport
Low delay mode and independent H & V offset available for each channel along with up to two frames of video delay, and up to 255 ms of audio delay
Order codes for IQH enclosures IQUCP5000-2B3
Universal Compute Processor. 16 SDI I/O, 2x 50 GbE I/O on single 100 GbE QSFP connector. Suitable for IQH4B frames IQUCP5001-3B3
Universal Compute Processor. 16 SDI I/O, 2x 50 GbE I/O on single 100 GbE QSFP connector. Includes IQFAN rear panel for additional cooling in IQH3B frame IQUCP5002-2B3
Universal Compute Processor. 16 SDI I/O, 2x 50GbE I/O on QSFP connectors. Suitable for IQH4B frames IQUCP5003-3B3
Universal Compute Processor. 16 SDI I/O, 2x 50 GbE I/O on QSFP connectors. Includes IQFAN rear panel for additional cooling in IQH3B frames
For more details on enclosure types please refer to datasheet IQH3B.
Software Defined Core Licenses
Essence processing license for SDI to/from IP with synchronization and audio rate adaptation IQUCP-SM
Signal monitoring license, includes 12x4 multiviewer functionality
SFP Options FCQ-100GE-SR4
100GBASE-SR short range SFP for MMF
Note: QSFP type must be ordered in addition to the module.
To change your cookie settings or find out more, click here.
If you continue browsing our website or close this banner, you accept these cookies.