MPEG Decoder with ASI and GigE IP Inputs

The IRD-3802 provides MPEG-2 decoding of ASI and IP transport streams to either HD or SD. It also provides processing of key video and audio parameters and signal probing functions for feed aggregation, distribution and monitoring applications by broadcasters and TV services providers. DVB-ASI or IP transport streams fed to the IRD-3802 can be decoded to provide either HD or SD video with embedded multichannel audio, in all leading formats, as well as composite video and stereo analog audio for monitoring. The IRD is also available with a DVB-CI slot, supporting leading conditional access systems, and allowing descrambling of mutiple encrypted services. With its Gigabit Ethernet port, the IRD-3802 can also act as a gateway, by performing IP encapsulation of the input transport stream in either RTP or UDP mode.

Input/output versatility
  • Dual ASI transport stream inputs
  • Single ASI transport stream output for signal monitoring or retransmission
  • IP transport stream input/output: an ASI signal can be re-transmitted as IP and an IP stream can be forwarded as ASI
  • IRD acts as IP video gateway with forward error correction (FEC) for improved quality
  • IRD-3802 is now available with a rear module featuring two Ethernet ports and change-over funtionality for use in redundant IP router topologies
  • Dual HD/SD SDI outputs
  • Composite video and stereo analog audio monitoring outputs
Conditional access
  • DVB-CI common interface slot allow descrambling of multiple programs
  • Supports BISS-1 with user supplied CAM card
Easy input and program selection
  • Manual or automatic input selection mode
  • Automatic mode allows switching to backup input upon loss of signal on active input, with adjustable duration
  • Program selection using local control or iControl
  • MPTS automatic program selection mode and recovery
Extensive video format support
  • 1920x1080i59.94/50
  • 1280x720p59.94/50
  • 720x486i59.94 and 720x576i50
Comprehensive dual program audio decoding
  • Decoding of MPEG-1 layer 2 stereo audio
  • Decoding of Dolby Digital (AC-3) 2.0 audio
  • Optional decoding and embedding of Dolby Digital (AC-3) 5.1 audio to SDI with support of main and associated audio services for up to discrete 8-channel output
  • Selectable pass-through of Dolby Digital stream to SDI
  • Decoding of AAC-LC audio for 2/0 and 1/0 coding modes
Frame synchronizer/delay, reference input and video proc
  • Supports timing, full phasing and freeze modes
  • Reference can be external via BNC, internal using URS or directly from the decoded signal with selectable genlock modes
  • Video proc amp functions including, brightness, saturation, hue and contrast
Decoded video format identification
  • Identification of key video parameters
    • Aspect ratio identification: 16:9 or 4:3
    • Video resolution
Audio processing and format identification
  • Provides downmix of 5.1 channel to Lt/Rt or Lo/Ro modes
  • Extensive Dolby Digital metadata reporting
  • Support for secondary audio program (SAP)
  • Configurable Dolby Digital dynamic range and compression
  • Dolby metadata embedding on SDI (SMPTE 2020-A)
Metadata extraction, display and embedding
  • EIA-608 and EIA-708 closed captioning
  • WST teletext
  • SMPTE 12M timecode
  • SMPTE 2016 AFD flag
Extensive PSIP data extraction
  • Time and date and other STT data
Transport stream probing and alarming
  • Transport stream (TS) monitoring and alarming and settings:
    • TR 101 290 Priority 1 and Priority 2 alarming on key parameters
    • Logging of alarms using iControl
  • Detailed TS structure reporting using graphical and hierarchical views
  • Individual program data statistics, including individual program bit rate, content and PMT data.
  • IRD generates low-resolution H.264 video proxy and 2-channel audio streams of selected programs for monitoring
Video up/down/crossconversion
  • Extensive selection of video format conversions
  • Quantity/ connector: 2 inputs with BNC connectors
  • Standards: EN50083-9 (V2:3/98) DVB ASI
  • Data bit rate: DVB ASI: Up to 80 Mb/s
  • Mode: Burst and byte supported
  • TS packet length: 188/204 byte packets
  • Return loss: >15 dB up to 270 MHz
  • Quantity/connector: One output with BNC connector
  • Quantity/connector: One gigabit Ethernet with RJ45 connector IEEE 802.3
  • Standards: Pro-MPEG code of practice 3 (CoP3)
  • Stream protocols: IP/UDP, RTP and IGMPV3
  • Compatibility standard:
    • MPEG-2 compatible MP at HL
    • 4:2:0, resolution up to 1080i, 59.94 Hz
    • ATSC A/53
  • Bit rate: Up to 25 Mb/s
  • Standard:
    • MPEG-1 layer-II
    • Dolby Digital (AC-3) audio 2.0
    • Optional Dolby Digital (AC-3)
    • Audio 5.1
    • AAC-LC audio 2/0 and 1/0
    • Dual Dolby Digital pass-through
  • Service/channels: As per ATSC A/54A
  • HD/SD SDI outputs: 2 outputs with BNC connectors
  • Signal:
    • SMPTE-259-C (270 Mb/s)
    • SMPTE 292M (1.485, 1.485/1.001 Gb/s)
  • Supported formats:
    • SD: 480i59.94, 576i50
    • HD: SMPTE 274M: 1080i59.94/50
    • HD: SMPTE 296M: 720p59.94/50
  • Embedded audio: SMPTE-299M, SMPTE-272M
  • Return loss: >15 dB up to 1.5 GHz
  • Jitter: <0.2 UI as per SMPTE-259M-C for SD output
  • <0.2 UI as per SMPTE-292M for HD output
  • Analog video: NTSC 525/60, PAL (625/50) with one BNC connector
  • Analog audio: Unbalanced analog audio with two RCA connectors
  • CC data extraction: NTSC CC1 and CC2 as per EIA-608B
  • DTV CC: EIA-608B compliant bytes of EIA-708B
  • CC embedding: CC embedding as per SMPTE-334M
  • Teletext: WST/EIA 300 706
  • Timecode: SMPTE 12M
  • PSIP: ATSC PSIP standard A/65
  • Reference input: One input with BNC connector
  • Signal:
    • SMPTE 170M/SMPTE 318M/ITU 624-4/BUT 470-6 blackburst
    • SMPTE 274M/SMPTE 296M tri-level sync (black)
  • Return loss: >35 dB up to 5.75 MHz
  • Power: 20W
Densité 3 frame Description
IRD-3802 MPEG decoder with ASI and GigE IP inputs
IRD-3802-CI MPEG decoder with ASI, GigE IP inputs and DVB-CI support
IRD-3802-3DRP Double rear connector panel
IRD-3802-3DRP-ECO Double rear connector panel with Ethernet change-over
Options Description
IRD-38NN-OPT-FS Frame synchronization and delay option with reference and genlock
IRD-38NN-OPT-UDC Up/down/crossconverter option
IRD-38NN-OPT-TS-PROBE Transport stream probing option
IRD-38NN-OPT-DOLBY Dolby Digital (AC-3) 5.1 audio decoder option
Related products Densité REF-1801 reference module
Remote control iControl, iControl Solo, RCP-200

IRD-3802: MPEG Decoder with ASI and GigE IP Inputs Datasheet

The IRD-3802 from Grass Valley, a Belden Brand, provides MPEG-2 decoding of ASI and IP transport streams to either HD or SD. It also provides processing of key video and audio parameters and signal probing functions for feed aggregation, distribution and monitoring applications by broadcasters and TV services providers.

Posted Mar 04 2015 (GVB-1-0397B-EN-DS) File Size: 918.5 KB

Read more »

See more related documents
Sales: USA +1 530 265 1000 / Canada +1 514 333 1772 / LATAM +1 305 213 8503 / EMEA +44 (0)118 952 3400 / Asia +852 2955 3260 / Customer Support
Copyright © 2017 Grass Valley Canada. All rights reserved. Legal Terms Privacy Careers About Us Contact Press View All Products