Kaleido-Modular
Space Saving, Single and Dual Quad-Split Multiviewer (4x1 / 8x2)

With the most dense quad-split multiviewer available, Kaleido-Modular is ideal for production applications. Space-saving, super-silent and energy-efficient, with up to 20 multiviewer outputs per 3 RU frame, it consumes less than 300 watts total. Kaleido-Modular can be expanded up to 288 multiviewer outputs when connected to an upstream router.

Kaleido-Modular Insights & Highlights
Unmatched space and energy efficiency
  • 20 quad-splits, or ten 8-input multiviewers, per 3 RU frame
  • Fully loaded frame with 20 cards weighs only 8.6 kg (19 lbs.)
  • Less than 300W for fully loaded 3 RU frame with 10 cards and up to 20 outputs (24W per dual output card)
  • Available cascading bridge connector for combining up to 3 cards, for a 24x2 multiviewer configuration
Fastest multiviewer
  • Requires less than 1/2 frame of processing delay, eliminating audio to video lip sync issues
Super silent
  • Ideal for installation within studios, control rooms and trucks
High quality, flexible monitoring
  • Outstanding multiviewer picture quality, based on award-winning Kaleido-X technology, with all essential display elements for production
  • Choice of single multiviewer output per card with up to 8 pictures, or dual quad-split displays
  • DXF-200 optical DVI extension uses multimode fiber with SC connector to simplify long runs of up to 1 km (3,280 ft.)
  • Easy layout editing with XEdit
  • Rapid remote control with Kaleido-RCP2 and RCP-200
  • Dual HDMI and HD/SD outputs for easy connection to monitors, or for feeding a router with multiviewer mosaics
Router integration
  • Tight integration with NVISION and third-party routers allows expansion up to 1,152 inputs and 288 multiviewer outputs
  • Multiple multiviewer outputs can be controlled from a single remote panel
Mix-and-match card functions
  • Kaleido-Modular multiviewer cards can be installed in a 3 RU frame with other Densité Series cards, such as signal processors and DAs, for maximum space and cost-effectiveness
Ultra-resilient
  • Hot swappable cards with IP address recovery
  • 3 RU frame features dual hot swappable power supplies and fans plus redundant Ethernet
3G/HD/SD performance with Stereoscopic 3D support
  • Triple rate, future-proof performance
  • Stereoscopic 3D support (dual link 1.5 Gb/s, SMPTE ST 292)
VIDEO INPUTS (8)

SD-SDI
Signal: SMPTE ST 259-C (270 Mb/s), SMPTE ST 272-1994
Formats: 480i59.94 and 576i50
Return loss: >15 dB up to 270 MHz
Jitter: <0.2 UI
Cable length: 250m (820 ft.) Belden 1694A
Connector: BNC
HD-SDI
Signal: SMPTE ST 292-C (1.485, 1.485/1.001 Gb/s), SMPTE ST 272-1994
Formats: 720p59.94, 1080p23.98, 1080p23.98SF, 1080p24, 1080p24SF, 1080p25SF, 1080p 29.97, 1080i50, 1080i59.94
Return loss: >15 dB up to 1.5 GHz
Jitter: <0.2 UI
Cable length: 100m (325 ft.) Belden 1694A
3G-SDI
Signal: SMPTE ST 424-2006 (2.97, 2.97/1.001 Gb/s) Level A
Formats: 1920x1080p60, 1920x1080p59.94, 1920x1080p50
Return loss: >10 dB from 1.5 GHz to 3 GHz
Jitter (wideband): <0.3 UI
Cable length: 85m (276 ft.) Belden 1694A

Graphic converted to HD-SDI from KXI-DVI-Bridge
Signal: SMPTE ST 292-C (1.485, 1.485/1.001 Gb/s)
Resolutions:

  • Mode A: 1024x768, 1366x768, 1280x1024, 1680x1050, 1600x1200 at 60 Hz
  • Mode B: 1280x720 and 1920x1080 at 50/60 Hz
Cable length: 100m (325 ft.) Belden 1694A
MOSAIC OUTPUTS (video and graphic)
HDMI (2)
Signal: HDMI V1.3
Format: 1280x1024 up to 1920x1200p configurable
Refresh rate supported (50 Hz and 59.94 Hz)
Cable length: 4.57m (15 ft.)
Connector: HDMI
Signal path: 8 bits output

HD-SDI (2)
Signal: 3G/HD-SDI SMPTE ST 424 and SMPTE ST 292 compliant
Supports data rates of 1483.5, 1485, 2967, 2970 Mb/s

Return loss:
  • >15 dB up to 1.5 GHz
  • >10 dB from 1.5 GHz to 3 GHz

Jitter (wideband):

  • HD: <0.2 UI
  • 3 Gb/s: <0.3 UI
REFERENCE
Internal Universal reference from the Densité frame
GPI INPUTS (8)
Contact closure: GND
Protection: Up to 24V
Connector: Terminal block interface PCB via DB-26
GPI OUTPUTS (2)
Maximum voltage: 24V
Maximum current at 1V: 20 mA (through 200Ω series resistor)
Pulse minimum duration: 10 μs
Connector: Terminal block interface PCB via DB-26
COMMUNICATION
ETHERNET (1)
Signal: 10/100 BASE-T
Connector: RJ45
SERIAL PORT (1)
Signal: RS-422 (SMPTE ST 207, EBU-3245)
Connector: Terminal block interface PCB via DB-26
VIDEO PROCESSING PERFORMANCE
Signal path: 8-bit YCbCr to 24-bit RGB
Processing delay: ~1 field in genlock mode, 1-2 fields in non-genlock mode
AUDIO PROCESSING PERFORMANCE
Quantization: 20-24 bits
Sampling: 48 kHz
THD+N: 80 dB
SNR: 98 dB
ELECTRICAL
Power consumption: 24W max
Kaleido-Modular cards
KMV-3911-4X1 Kaleido-Modular HD/SD-SDI 4x1 multiviewer with HD-SDI outputs
KMV-3911-4X2 Kaleido-Modular HD/SD-SDI 4x2 multiviewer with HD-SDI outputs
KMV-3911-8X1 Kaleido-Modular HD/SD-SDI 8x1 multiviewer with HD-SDI outputs
KMV-3911-8X2 Kaleido-Modular HD/SD-SDI 8x2 multiviewer with HD-SDI outputs
KMV-39N1-NX1-OPT-OP2 Output two enabled license
KMV-3911-8X2-3DRP Double rear connector panel
Note: Can be used with either Densité 3 or Densité 3 mini but frame must be equipped with ETH2 controller in order to insure proper functionality.
Options
KMV-3901-8XN-BRIDGE Cascading bridge for KMV-3901-8XN modules
Note: One bridge per pair of cards, can cascade up to 3 KMV-3901-8x2 modules
KMV-39N1-8XN-OPT-3GBPS 3 Gb/s signal decoding option (8 inputs)
KMV-39NN-8x1-OPT-3DLA Stereoscopic display license (line alternate mode) for KMV-3911-8x1
KMV-39NN-8x2-OPT-3DLA Stereoscopic display license (line alternate mode) for KMV-3911-8x2
DXF-200-C Optical extension system w/HDMI+L- HDMI cable
DXF-200-PSU DXF-200 power supply (1x sub-module)
KALEIDO-RCP2 Ethernet remote control panel and KM Gateway
KRCP-RK2 Kaleido-RCP2 rack mount bracket
RCP-200 Advanced remote control panel for models and accessories
NSH26M Terminal block adapter for HD-26 connections (for audio I/O connections)
KXC-HDMI-DVI HDMI to DVI female cable 0.3m (1 ft.)
Grass Valley & third-party interface options
KMV-39N1-8XN-OPT-RT-NVISION Control and UMD support for NVISION routers
KMV-39N1-8XN-OPT-RT-DATATEK Control and UMD support for Datatek routers
KMV-39N1-8XN-OPT-RT-ENCORE Control and UMD support for Encore controllers
KMV-39N1-8XN-OPT-RT-EVERTZ Control and UMD support for Evertz routers
KMV-39N1-8XN-OPT-RT-GVG7000 Control and UMD support for GVG7000 routers
KMV-39N1-8XN-OPT-RT-JUPITER Control and UMD support for Jupiter routers
KMV-39N1-8XN-OPT-RT-HARRIS Control and UMD support for Harris routers
KMV-39N1-8XN-OPT-RT-NETWORK Control and UMD support for Nevion routers
KMV-39N1-8XN-OPT-RT-SNELL Control and UMD support for Snell routers
KMV-39N1-8XN-OPT-RT-PESA Control and UMD support for PESA routers
KMV-39N1-8XN-OPT-RT-UTAH Control and UMD support for Utah routers
KMV-39N1-8XN-OPT-TLY-KAHUNA Tally interface for Snell and Wilcox Kahuna switchers
KMV-39N1-8XN-OPT-TLY-KALYPSO Tally interface for Grass Valley Kalypso switchers
KMV-39N1-8XN-OPT-TLY-KAYAK Tally interface for Grass Valley Kayak switchers
KMV-39N1-8XN-OPT-TLY-SONY Tally interface for Sony switchers (serial protocol)
KMV-39N1-8XN-OPT-TLY-SYNERGY Tally interface for Ross Synergy and Vision switchers
KMV-39N1-8XN-OPT-TLY-ZODIAK  
Housing frames and options
Densité 3 Housing frame with (1) PSU (AC-IN), (1) Ethernet controller with front control panel, blank rear
Densité 3-PSU-AC Redundant PSU for Densité 3
Densité 3-CPU-ETH2-OPT-LNK Full link redundancy using channel bounding on Densité-CPU-ETH2
REF-1801-3RU Reference card for Densité 3 frame (including 3 RU adapter)
REF-1801-SRP-3RU Single rear connector panel for REF-1801 (including 3 RU adapter)
Densité 3 mini Housing frame with (1) PSU (AC-IN), (1) basic controller with front control panel, (1) blank rear panels SRP
Densité 3 mini PSU Redundant external PSU for Densité 3 mini
Densité 3 mini-Tray 1 RU tray for two Densité 3 mini frames
Densité 3 mini-CPU-ETH2 Controller card with redundant Ethernet ports
  Full link redundancy using channel bounding on Densité 3 mini-CPU-ETH2
Note: The KMV-3911 can only be used with Densité 3 or Densité 3 mini frames with ETH2 controllers.

Kaleido-Modular: Space Saving, Single and Dual Quad-Split Multiviewer (4x1 / 8x2) Datasheet

With the most dense quad-split multiviewer available, Kaleido-Modular from Grass Valley, a Belden Brand, is ideal for production applications. Space-saving, super-silent and energy-efficient, with up to 20 multiviewer outputs per 3 RU frame, it consumes less than 300 watts total. Kaleido-Modular can be expanded up to 288 multiviewer outputs when connected to an upstream router.

Posted Apr 04 2017 (GVB-1-0228B-EN-DS) File Size: 8.8 MB

Read more »

See more related documents
Sales: USA +1 530 265 1000 / Canada +1 514 333 1772 / LATAM +1 305 213 8503 / EMEA +44 (0)118 952 3400 / Asia +852 2955 3260 / Customer Support
Copyright © 2017 Grass Valley Canada. All rights reserved. Legal Terms Privacy Careers About Us Contact Press View All Products