Specifications
Weight: 5.5 kg (11 lbs., incl. 2" VF and head+adapter)
Dimensions (H x W x L, approx.): 241 x 164 x 373 mm (9.5 x 6.5 x 14.7 in.) with triax HD adapter
Operating temperature: -20°C to +45°C (-4°F to +113°F)
Storage temperature: -20°C to +60°C (-4°F to +140°F)
Power: Triax or DC 12V; 40W incl. 2" VF & triax HD adapter
Cable length: Up to 1200m (3,937 ft.)
Pickup device: 3 x 2/3" CMOS imagers
Picture elements: 1920 x 1080
Digital processing: 22-bit accurate processing
Lens mount: 2/3" Bayonet type
Optical system: F1.4 prism
Optical filter wheel: 1 motorized wheel
Optical filters: Clear, 1/4 ND, 1/16 ND, 1/64ND or 4p star (software selectable)
Exposure: Electronic exposure down to 1/2000 sec
Clean scanning:
- 50 Hz scanning: 50 to 103 Hz
- 60 Hz scanning: 60 to 155 Hz
Color correction filters: Electronic: 3200°K, 4700°K, 5600°K, 7500°K, 2 AWB presets, continuous auto white
Switchable: 1080i/720p
Temporal frequencies: 50/59.94 Hz
Sensitivity: 2000 lux @ F9
S/N ratio: 58 dB (typical)
Aspect ratio: 16:9
Gain selection: -6 to +30 dB in 3 dB steps (user-definable presets) or continuous master gain
Modulation depth: 50% (typical) at 800 TV lines (27 MHz) in 1080i/720p/50/59.94 mode
Front microphone input: XLR-3 female, balanced +48V selectable
Lens connector: Hirose 12-pin
Control input: 9-pin RS-232C compatible
VF connector: 20-pin and HDMI connector
Input connectors:
- Audio in: XLR-3-31 type (female x2), selectable phantom +48V, selectable attenuator
- DC 12V in: XLR-4 pin type
Output connectors:
- VF out, BNC type, 1.0 Vp-p, 75Ω, switchable to external (SD+HD)
- 1x BNC, SMPTE 292M, HD-SDI out: 1.5 Gb/s, 0.8 Vp-p, 75Ω
- Scriptlight DC-out: 3-pin Fischer, 0.25A/12V DC
- DC-out: 4-pin Hirose, 1.5A/12V DC and tally indicators
Input/output connectors:
- Video ref in/prompter out, BNC type, 1.0 Vp-p, 75Ω
- Intercom: XLR 5-pin (female x1)
Dimensions (WxHxD): 438 (19" rack) x 88 (2 RU) x 510 mm (17.2 x 3.5 x 20.1 in.)
Operating temperature: 0°C to +50°C (+32°F to 122°F)
Storage temperature: -40°C to +70°C (-40°F to 122°F)
Operating humidity: Max. 90% (non-condensing)
Shock resistance: Max. 10G (transport)/ 2G (operating)
Altitude: Max. 15,240m (50,000 ft.)
Weight: 17.0 kg (37.5 lbs.)
Power requirements: AC 115V/230V ±15%, 47 to 63 Hz
Power connector: IEC type, 3-pin male
Power consumption: 470 VA or 270 watts max. with studio head; 360 VA or 210 watts max. with port. head
Typical cable length triax:
- 1200m (3,937 ft.) (14 mm/0.55 in.)
- 700m (2,297 ft.) (11 mm/0.42 in.)
- 500m (1,640 ft.) (8 mm/0.31 in.)
Typical cable length triax w/repeater:
- 2400m (7,874 ft.) (14 mm/0.55 in.)
- 1400m (4,593 ft.) (11 mm/0.42 in.)
- 1000m (3281 ft.) (8 mm/0.31 in.)
Teleprompter in: BNC 1x (loop-through output), 1.0 Vp-p, 75Ω (triax cable 25% of max. spec)
Reference in: BNC 1x (loop-through output), 1.0 Vp-p, 75Ω D tri-level sync or SD black burst
HD-SDI out: BNC 3x, 0.8 Vp-p, 75Ω, SMPTE 292M, 1080i/720p at 59.94/50 Hz
SDI in: BNC 2x, 0.8 Vp-p, 75Ω, SMPTE 259M, ITU-R, BT.601 OR
Text out: BNC 1x, 1.0 Vp-p, 75Ω (VBS)
Signaling in/out:
- D-sub 15-pin, male
- Preview, green tally (call), dry contact
- Yellow tally (iso), dry contact
- Red tally (on-air), dry contact
- Remote audio level control (22-64 dB), DC
RS-232: D-sub 9-pin, male (RXD, TXD, DTR, DSR, RTS, CTS)
Control data: RJ-45 connector for Ethernet C2IP
Triax connector:
- Fischer /00
- Tri-Lock /50
- ARD /05
- Lemo4E /10
- LemoBBC /40
- Lemo3T /15
SDI out: BNC 3x, 0.8 Vp-p, 75Ω, SMPTE 259M, ITU-R, BT.601
2 Ch. audio & 2/4-wire intercom
Audio out: XLR-3 2x, 0/+6 dBu (±1.5 dB, max. 18 dBu, 600Ω, gain max. 70 dB)
Frequency response: 40 Hz to 15 kHz, (+1/-3 dB, 1 kHz, -10 dBu output level)
Distortion: Less than 0.5% (100 Hz/1 kHz, +6 dBu out, 600Ω)
S/N ratio: 58 dB (unweighted RMS)
Intercom in/out: D-sub 15-pin, female (program in, production in/out, engineering in/out) in: 0 or 6 dBu (max. 6 or 12 dBu); out: 0 or 6 dBu (±2 dB, max. 12 dBu)
Frequency response: 150 Hz to 6 kHz (1 kHz, -10 dBu output level)
