SFP-RT-W15-LC
1-Fiber 1550 nm WDM Optical Transceiver Cartridge with Simplex LC
The SFP-RT-W13-LC is a one fiber bidirectional single mode optical transceiver that supports signals up to 3 Gb/s as per SMPTE ST 259, SMPTE ST 292 and SMPTE ST 424, including SDI pathological test patterns described in SMPTE engineering guideline SMPTE EG 34 and SMPTE recommended practices SMPTE RP 178 and SMPTE RP 198.
  • SMPTE ST 297:2006 compatible
  • 3G/HD/SD SDI:
    • SMPTE ST 424, SMPTE ST 292
    • SMPTE ST 259-ABCD compliant
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • 1-fiber bidirectional SFP optical transceiver
  • Simplex LC
  • RoHS-6 compliant
  • Hot pluggable
Transmitter Specifications (0°C < Tc < 70°C, 3.13V < Vcc < 3.47V)

Parameter

Symbol

Min.

Typ.

Max.

Units

Notes

Optical

Optical Transmit Power

Po

-8

 

-3

dBm

Output power is power coupled into a 9/125 mm single mode fiber

Output Center Wavelength

λ

1480

 

1580

nm

 

Output Spectrum Width

Δλ

 

1

nm

-20 dB width

Side Mode Suppression Ratio

SMSR

30

 

 

dB

 

Extinction Ratio

ER

5

7.5

 

dB

 

Relative Intensity Noise

RIN

 

 

-120

dB/Hz

 

Optical Rise Time / Fall Time

tr / tf

 

 

135

ps

SMPTE ST 424, 20% to 80%, unfiltered

 

 

270

ps

SMPTE ST 292, 20% to 80%, unfiltered

 

 

1.5

ns

SMPTE ST 259, 20% to 80%, unfiltered

Electrical

Differential Input Voltage

VIH - VIL

200

 

1200

mVp-p

AC Coupled Input

Disable Input Voltage — Low

VTDIS,L

0

 

0.8

V

TX Output Enabled

Disable Input Voltage — High

VTDIS,H

2.0

 

Vcc+0.3

V

TX Output Disabled

SCL, SDA

VOH

2.5

 

Vcc+0.3

V

 

VOL

0

 

0.5

V

 

Receiver Specifications (0°C < Tc < 70°C, 3.13V < Vcc < 3.47V)

Optical

Wavelength of Operation

 

1260

1360

nm

At least 30 dB optical isolation for the wavelength 1260 to 1360 nm

Sensitivity for SMPTE ST 424 2.97 Gb/s

Sen

 

 

-18

dBm

Pathological

 

 

-20

dBm

PRBS 223-1, BER=1E-12

Sensitivity for SMPTE ST 292 1.485 Gb/s

Sen

 

 

-20

dBm

Pathological

 

 

-21

dBm

PRBS 223-1, BER=1E-12

Overload

 

0

 

 

dBm

 

Signal Detect — Asserted

Pa

-20

dBm

Transition: low to high

Electrical

CML Output (Differential)

 

550

660

850

mVp-p

AC coupled output

Optical Rise Time / Fall Time

tr / tf

 

 

135

ps

SMPTE ST 424, 20% to 80%, unfiltered

 

 

270

ps

SMPTE ST 292, 20% to 80%, unfiltered

 

 

1.5

ns

SMPTE ST 259, 20% to 80%, unfiltered

Output LOS Voltage — Low

VOL

0

 

0.5

V

IOL = -1.6 mA, 1 TTL unit load

Output LOS Voltage — High

VOH

2.5

 

Vcc+0.3

V

IOH = 40 mA, 1 TTL unit load

SCL, SDA

VOH

2.5

 

Vcc+0.3

V

 

VOL

0

 

0.5

V

 

Absolute Maximum Ratings — Exposure to absolute maximum rating conditions for extended periods may affect device reliability

Storage Temperature

Tstg

-40

 

85

°C

 

Operating Case Temperature

Tc

0

 

70

°C

 

Power Supply Voltage

Vcc

0

 

4

V

 

ESD Tolerance on All Pins

 

 

 

1

KV HBM

 

Relative Humidity

5

 

95

% RH

Non-condensing

Recommended Operating Conditions

Power Supply Voltage

Vcc

3.13

3.3

3.47

V

 

Operating Case Temperature

Tc

0

 

70

°C

 

Baud Rate

 

<50

 

3000

Mb/s

 

Power Supply Current

Icc

 

200

300

mA

 

 

Note: Only connections with patch cords with PC or UPC connectors are supported.

Note: WDM Series SFP-RT-W15-LC is only compatible with SFP-RT-W13-LC.

Part Number

Type

Maximum Bit Rate (Mb/s)

TX

RX

Package

Temp (°C)

RoHS Compliant

λ (nm)

Power (dBm)

λ (nm)

Sen. (dBm)

SFP-RT-W15-LC

1-TX+1-RX

3000

1550 DFB

-8 to -3

1310

-18

LC SFP with DMI

0 to 70

Yes

Related Product

SFP-RT-W13-LC

1-TX+1-RX

3000

1310

-5 to 0

1550

-18

LC SFP with DMI

0 to 70

Yes

 

Note: Only connections with patch cords with PC or UPC connectors are supported.

Note: WDM Series SFP-RT-W15-LC is only compatible with SFP-RT-W13-LC.

Small Form-factor Pluggable (SFP) Optical Module Cartridges (Video): For Densité Frames, Standard NVISION 8500 Series Routers, LUMO cards and PicoLink FIO-991p Datasheet

The Small Form-factor Pluggable (SFP) optical module cartridges for video are small, hot-pluggable devices used to provide fiber connectivity to 3G/HD/SD SDI products from either a Densité frame (they can be used with any video card that has a rear module with an "F" name suffix (i.e., HDA-193N-DRP-F), irrelevant of which Densité frame is hosting the card), standard (not hybrid) NVISION 8500 Series routers, LUMO cards and PicoLink FIO-991p. By using single-mode fiber instead of coaxial cables, these interfaces can be used over much longer distances without degrading signal quality, which is very useful when carrying 3G signals.

Posted Feb 03 2017 (GVB-1-0621B-EN-DS) File Size: 1.7 MB

Read more »

See more related documents
Sales: USA +1 530 265 1000 / Canada +1 514 333 1772 / LATAM +1 305 213 8503 / EMEA +44 (0)118 952 3400 / Asia +852 2955 3260 / Customer Support
Copyright © 2017 Grass Valley Canada. All rights reserved. Legal Terms Privacy Careers About Us Contact Press View All Products