KudosPro LC2000 & LC4000
Motion Adaptive Frame-rate Converter
The LC2000 and LC4000 are highly cost-effective, linear motion adaptive frame-rate converters.
FEATURES
- Linear motion adaptive SD/HD/3G frame-rate conversion
- Independent dual-channel (LC2000) and quad-channel conversion (LC4000)
- SD/HD/3G up/down/crossconversion
- Flexible video and audio I/O configuration
- 16-channel embedded audio processing for each video channel
- Continuous output when input standard switches
- HDMI monitor output
- Dual PSU as standard
- Relay bypass on primary SDI inputs
- Automatic aspect ratio conversion (AFD, VI, L23)
- Powerful picture enhancement tools
- Front panel and remote control via GV Orbit
- Closed caption and timecode handling
- Synchronization
- User chosen line for SMPTE ST 2016
- GPI support
- Front panel control lock
- Caption generator
- Logo inserter
- Sidebar keyer
- Clean cut
- Composite input/output
- Fiber input/output
Applications
- High-density international program distribution
- Low-cost frame rate conversion
- International TV and video back-up channels
SPECIFICATIONS
Signal Inputs
Serial digital 4x 75Ω SD/HD/3G serial digital with embedded audio
Input standards:
- 3 Gb/s SD-SDI, SMPTE ST 425 level A, level B
- 1.5 Gb/s HD-SDI SMPTE ST 292/SMPTE ST 299
- 270 Mb/s SD-SDI SMPTE ST 259
Composite PAL, NTSC, NTSC-J, PAL-M, PAL-N, N4.4, SECAM
12-bit ADCs
Analog component YC
Reference: 1 x loop-through HDTV Tri-sync/SD Bi-sync (blackburst) SMPTE ST 240/SMPTE ST 274
Audio AES:
- 4x balanced AES inputs – via 25-way D-type
- 4 x unbalanced AES inputs – via 4x BNC
Audio analog: 4x stereo analog inputs via 25-way D-type
Signal Outputs
Serial digital 4 x 75Ω SD/HD/3G serial digital with embedded audio
Output standards:
- 3 Gb/s HD-SDI, SMPTE ST 425 level A, level B
- 1.5 Gb/s HD-SDI SMPTE ST 292/SMPTE ST 299
- 270 Mb/s SD-SDI SMPTE ST 259
Composite PAL, NTSC, NTSC-J, PAL-M, PAL-N
12-bit DACs
Analog component YC
Audio AES:
- 4x balanced AES outputs – via 25-way D-type
- 4x unbalanced AES outputs – via 4x BNC
Audio analog: 2x stereo analog outputs via 25-way D-type
Input Standards
(auto detect) 525, 625
720 50/59.94/60p
1080 50/59.94/60i
1080 50/59.94/60p (Levels A and B)
720/1080 23.98/24/25/29/30p
1080 23.98/24/25/29PsF
Output Standards
525, 625
720 50/59.94/60p
1080 50/59.94/60i
1080 50/59.94/60p (Levels A and B)
720/1080 23.98/24/25/29/30p
1080 23.98/24/25/29PsF
Conversion Functions
Modes:
- SD/HD/3G linear frame rate
- Up/down/crossconversion
- Frame Synchronizer
Conversion: Up/down/crossconversion
Manual or Automatic ARC
AFD (SMPTE ST 2016), VI (RP186), WSS (L23)
SD input format: Normal 4:3, Anamorphic 16:9, Letterbox 14:9, Letterbox 16:9
SD output format: Normal 4:3, Anamorphic 16:9, Letterbox 14:9, Letterbox 16:9
Auto zoom: On/Off
Manual zoom: Zoom ±20%
Safe area marker: Off, 16:9, 4:3
Manual controls: size, aspect, pan, tilt
Wide range of ARC presets including 702 sample line mode
Audio Functions
Analog Audio:
- Four pairs of analogue inputs are individually available to any or all processing channels
- Two groups (2 pairs) of analog output are separately assignable to any processing channel
- Headroom +24 dBu; balanced connection
AES Audio:
- Four AES audio inputs are individually available to any or all processing channels
- Four AES audio outputs (48 kHz) are separately assignable to any processing channel
- AES input is auto-detected as PCM (32-96 kHz) or non-PCM (48 kHz locked to relevant video input
Embedded Audio:
- Each processing channel includes 16-channel embedded audio processing
- PCM audio processing includes channel level gain and delay compensation, as well as channel level routing/shuffle with audio phase inversion
- Non-PCM processing features pair level routing and delay compensation
Metadata
Closed caption CEA608 <> CEA708
Timecode conversions
WST/SMPTE RDD08/SMPTE ST 2031 conversion
Enhancement
Advanced Horizontal Enhancement:
- Frequency band selection (Low, Med, High)
- 4 preset enhancement levels (Low, Med, High, Super)
- Custom H Gain and H Noise rejection levels
Advanced Vertical Enhancement:
- Frequency band selection (Low, Med, High)
- 5 preset enhancement levels (Soft 2, Soft 1, Normal, Sharp 1, Sharp 2)
Horizontal Aperture:
- 5 preset H sharpness levels (Low 2, Low 1, Normal, High 1, High 2)
- 5 preset H detail levels (Soft 2, Soft 1, Normal, Sharp 1, Sharp 2)
Noise reduction: spatial, recursive
Y/C alignment: corrects for up-stream luma-chroma displacement
System
Pattern Off, Black, Ramp, Bars
Proc amp:
Black Level: +100 to -100 mV (0) in 0.8 mV steps
Contrast: -6 dB to +6 dB (0) in 0.2 dB steps
Saturation: -6 dB to +6 dB (0) in 0.2 dB steps
Y Gamma: 0.4 to 1.7 (1) in 0.1 steps
Freeze: On/Off
Genlock: Reference lock, input lock (same format), Follow input (same frame rate), Free run
Memories: 16 user memories
Legalizer
EDH support
Communications
Remote control via GV Orbit and SNMP
Power (Primary and Secondary)
Input voltage range 100 – 240 VAC, 50/60 Hz 1.5A (max.) via three-pin IEC power socket
Mechanical
Temperature range: 0 to 45° C (32° to 113° F) operating
Cooling: Internal fan, side venting
Weight: Approximately 4.25 kg (9.4 lbs.)
Case type: 1 RU, rack mounting
Dimensions: 44 x 430 x 400 mm (1.7 x 16.9 x 15.7 in.) (HxWxD))
Headphones socket with volume control
GPIO: 8 available
Throughput Delay
Video processing delay:
- Field = 16.7 or 20 ms
- Frame = 33.3 or 40 ms
With scaling active in same frame rate:
- Ref lock/Free run – between 3 and 5 fields + ~200 µs
- Input lock (SDI) – 3 fields + 1 ms
With same standard in & out and Sync mode = Enabled:
- Ref lock/Free run – between ~200 µs and 1 frame + ~200 µs
- Input lock (SDI) – ~1 ms
Frame rate conversion:
- Any lock mode – 110 ms typical
Audio processing delay (Audio delay = 0 ms):
With scaling active in same frame rate:
- Ref lock/Free run – 1.5 frames
- Input lock – 1 frame + 1 ms
With same standard in & out and sync mode = Enabled:
- Ref lock/Free run – 0.5 frames
- Input lock – ~3 ms
Frame rate conversion:
- Any lock mode – 110 ms typical
MEDIA GALLERY
ORDERING INFORMATION
6122110
LC2000-CT2 Dual channel video & audio processing unit, including frame-rate/format conversion, frame synchronization, ARC control, noise reduction, side-bar keying, logo insertion, CC, WST and timecode handling, picture enhancement tools, 16 channel audio processing including gain, delay & shuffling. SDI (BNC or fiber), CVBS, GPI, AES and analog audio I/O. HDMI monitor output & dual PSUs.
6124110
LC4000-CT2 Quad channel video & audio processing unit, including frame-rate/format conversion, frame synchronization, ARC control, noise reduction, side-bar keying, logo insertion, CC, WST and timecode handling, picture enhancement tools, 16 channel audio processing including gain, delay & shuffling. SDI (BNC or Fiber), CVBS for 2 channels, GPI, AES and analog audio I/O. HDMI monitor output & dual PSUs.
Fiber SFP Options for Fiber — A&B
FC1-13TR: Transceiver 1310 nm/Rx
FC1-13T1: Single 1310 nm Tx
FC1-13T2: Dual 1310 nm Tx
FC1-R1: Single Rx
FC1-R2: Dual Rx
FC1-HDBT2: HD-BNC Dual Tx
FC1-HDBR2: HD-BNC Dual Rx
Note: Fiber SFP type must be ordered in addition to the unit.