Thunder
80 Channel Audio/Data/Intercom Link

Thunder is the newest generation high-volume audio/data/intercom transport link from Grass Valley. Thunder transports up to 80 audio, intercom or data paths, configurable in 8-path groups (10 groups total), all on one or two strands of fiber, at the lowest price and most compact size ever available. Simply equip the compact 1 RU frame with the appropriate Thunder Bolt I/O cards to create a fiber optic link that can solve virtually any audio/intercom/data connectivity situation in the teleproduction environment, buying only the components you need.


  • 40 km (24.85 mi.) range (20 dB link budget) on one or two single-mode fiber strands
  • Up to 80 audio or 40 data paths, configurable in 8/4-path groups (10 groups total)
  • Superior audio quality
  • 1 RU Thunder main chassis plus 1 RU and 1.5 RU breakout panels
  • 8 or 16 channels per breakout panel
  • 1 RU Thunder main chassis also provides two additional bidirectional channels of multiformat data (RS-232/422/485), one channel of GPI and a BNC input connector for synchronizing AES audio output cards in the Thunder chassis to house clock timing
  • Breakout panels can be mounted in front or behind the Thunder main chassis, and interconnected with DB-25 cables (supporting 8 channels each)
  • Optional redundant fiber IN and OUT ports, both
  • Integral optical power monitoring for local and remote signal strength

Thunder Frame Specifications

General
Transmission Method: Digital Time Division Multiplexing (TDM)
Aggregate Data Rate Through Optical Fiber: 150 Mb/s

Data/GPI I/O on Rear Panel Connector

Data:
RS-232 mode:

  • Input voltage range: >±3 Vp-p to <±25 Vp-p (.5V internal hysteresis)
  • Input bias current: ±100 μA maximum
  • Input impedance: 33 kΩ ±5%
  • ESD tolerance: ±15 kV air-gap, ±8 kV contact, ±15 kV HBM
  • Output voltage: ±5.5 Vp-p @±5%, Rload ≥3 kΩ
  • Data rate: DC to 160 kbaud (High speed limit determined by asynchronous sampling rate. Jitter is fixed @ 320 ns. Higher data rates are possible if equipment driven has greater jitter tolerance. Up to 1 Mbaud maximum)

RS-422, RS-485 modes:

  • Input voltage range: 100 mV to 12V differentially across “+” and “-” data input pins or 50 mV to 6V on either input with respect to GND (50 mV internal hysteresis)
  • Input common mode range: +1.65V DC ±10%
  • Input bias current: ±600 μA maximum
  • Input impedance: 33 kΩ ±5% (For data rates ≥20 kb/s and/or multi-drop applications with longer cable lengths, an external 110Ω resistor is recommended across the “+” and “–” data inputs of the unit furthest from the driving source to properly terminate the line. This will minimize random bit errors induced by cable reflections.)
  • ESD tolerance:
    • ±15 kV air-gap
    • ±8 kV contact
    • ±15 kV HBM
  • Output voltage:
    • 0-3.3V per output unloaded
    • 0-1.85V per output at Rload 54Ω
    • 6.6 Vp-p output differential unloaded
    • 3.7 Vp-p output differential at Rload 110Ω
  • Data rate: DC to 200 kb/s (High speed limit determined by asynchronous sampling rate. Jitter is fixed @320 ns. Higher data rates are possible if equipment driven has greater jitter tolerance. Up to 1 Mb/s maximum)
  • Time delay after a transmitted data burst before a return message can be accepted at the receiver (RS-485 only): 16.4 μs

Data format inputs (pins 7 and 10 on the DB-15 HD data I/O connector):

  • RS-422 mode: No connection, input pin left “floating”
  • RS-232 mode: Input pin either hardwired to ground (pins 22 and 25) or switched to ground by a remote GPI closure
    • Voltage on floating input pin: 3.3V ±2%
    • Input resistance when pulled to ground: 100 kΩ ±5%
  • RS-485 mode: Input pin either hardwired to “Format Bias” (pin 15) or switched to “Format Bias” by a remote GPI closure
    • Voltage on floating input pin: 3.3V ±2%
    • Input resistance when pulled to “Format Bias”: 9.1 kΩ ±5%
  • Format bias output (pin 15 on the DB-26 HD Data I/O connector):
    • Output voltage: 12V DC ±5%
    • Output current limit: 300 mA DC maximum

GPI:
Inputs (pin 4 on the DB-15 HD data I/O connector. GND on pin 5):

  • Voltage on floating input pin: 3.3V ±2%
  • Input voltage for remote contact activation: ≤1V DC (typically grounded through GPI contacts, TTL/HCMOS level drive also suitable)
  • Input resistance when pulled to ground (GPI output activated): 5 kΩ ±1%

Output contact pairs (pins 13&14)

  • Contact format: 1 Form A (non-activated condition)
  • Contact resistance: 100 mΩ
  • Switching voltage: 125V AC, 110V DC maximum
  • Contact rating: 2A @30V DC, 0.3A @125V AC (resistive load)
  • Maximum toggle rate: ≈ 5 Hz
  • Breakdown voltage:
    • Between open contacts: 750 Vrms for 1 minute
    • Between contact and coil: 1500 Vrms for 1 minute

Format bias output (pin 10 on the DB-26 HD data I/O connector):

  • Output voltage: 5V DC ±5%
  • Output current limit: 300 mA DC maximum

Note: Aside from providing a bias voltage for the data format options, the “Format Bias” pin also provides a DC voltage source for low power loads that may be switched by the GPI output contacts, such as LEDs for Tally use etc.

Electro-Optical
Operating Wavelength:
Standard: 1300 nm
Others available: CWDM wavelength 1270-1660 nm
TX laser output power: -6 dBm
RX Sensitivity:
270 Mb/s: -24 dBm
1.5 Gb/s: -22 dBm
3.0 Gb/s: -20 dBm
Fiber Compatibility: Single mode only
Distance Limitations: (1.5 Gb/s) 16 dB optical loss (30 km/18.64 mi., nominal*)
Optical Connector Options: ST, MX, OpticalCON, SMPTE ST 304

Mechanical/Environmental
Dimensions (WxLxD):
Frame (1 RU): 482.6 x 165.1 x 44.5 mm (19 x 6.5 x 1.75 in.)
Panels (1 RU): 482.6 x 165.1 x 44.5 mm (19 x 6.5 x 1.75 in.)
Panel (Active Audio IN – 2 RU): 482.6 x 120.7 x 68.6 mm (19 x 4.75 x 2.7 in.)
Weight:
Frame with 10 Bolt cards: 2.5 lbs.
Panels (1 RU): 2.5 lbs.
Panel (Active Audio IN – 2 RU): 3.5 lbs.
Power:
Mains: 100-240V AC, 50-60 Hz, max. 60W
Auxiliary: 10-18V DC on 4-pin XLR
Temperature range: -25° to +55°C (-13° to + 131°F)
Humidity range: 0 to 95% RH, non-condensing
* The maximum cable length varies due to optical loss that can depend on cable quality, dirt/dust/contamination on connectors, and the number of cable connectors.

Audio Specifications

Analog Audio IN Bolt
Connector Pin-out Protocol: Tascam standard 8-channel balanced analog audio, 25-pin DB-25 socket
Input Impedance: 20 kΩ ±1% @1 kHz, balanced, AC coupled
Maximum Input Level (clip): +24 dBu +.4/-0 dB, 20 Hz to 20 kHz
Frequency Response:
+0/-3 dB, 1.6 Hz to 100 Hz
+0/-.07 dB, 100 Hz to 20 kHz
Signal to Noise Ratio, Ref. +24 dBu:
>104 dB unweighted, 20 Hz to 20 kHz
>107dB, A-weighting
Total Harmonic Distortion:
≤.005% @ 1 kHz @20 dBu
≤.02%, 20 Hz to 20 kHz
Intermodulation Distortion: ≤.001% @20 dBu, SMPTE-DIN Method
Common Mode Rejection Ratio: ≥45 dBu, 20 Hz to 20 kHz
Adjacent Channel Crosstalk, Ref.+24 dBu: ≥104 dB, 20 Hz to 20 kHz
A/D Conversion:
Sample resolution: 24 bits
Sample rate: 48.83 kHz
Analog audio input level for 0 dBFS digital output: 24 dBu ±.2 dB

Analog Audio OUT Bolt
Connector Pin-out Protocol: Tascam standard 8 channel balanced analog audio, 25 pin DB-25 socket
Output Impedance: 33Ω ±5% @ 1 kHz, balanced, AC coupled
Maximum Output Level (clip): +24 dBu, ±.2 dB
Frequency Response:
+0/-3 dB @12 Hz to 100 Hz
+0/-.07 dB, 100 Hz to 20 kHz @ Rload ≥600Ω
Signal to Noise Ratio, Ref. +24 dBu:
>104 dB unweighted, 20 Hz to 20 kHz
>107 dB, A-weighting
Total Harmonic Distortion:
≤.005% @ 1 kHz @20 dBu
≤.02%, 20 Hz to 20 kHz
Intermodulation Distortion: ≤.001% @20 dBu, SMPTE-DIN Method
Adjacent Channel Crosstalk, Ref. +24 dBu: ≥104 dB, 20 Hz to 20 kHz
D/A Conversion:
Sample resolution: 24 bits
Sample rate: 48.83 kHz
Analog audio output level for 0 dBFS digital input: 24 dBu ±0.2 dB

Analog Audio End-to-End Performance
Analog IN to Analog OUT Level Deviation: ≤±0.2 dB @1 kHz
Maximum Throughput Level: +24 dBu, +0.4/-0 dB, 20 Hz to 20 kHz
Frequency Response:
+0/-3 dB @12 Hz to 100 Hz
+0/-.07 dB, 100 Hz to 20 kHz @Rload ≥600Ω
Signal to Noise Ratio, ref.+24 dBu:
>104 dB unweighted, 20 Hz to 20 kHz
>107 dB, A-weighting
Total Harmonic Distortion:
≤.005% @1 kHz @20 dBu
≤.05%, 20 Hz to 20 kHz
Intermodulation Distortion: ≤.001% @20 dBu, SMPTE-DIN Method
Adjacent Channel Crosstalk, Ref. +24 dBu: ≥104 dB, 20 Hz to 20 kHz
Audio Signal Propagation Delay: ≤1 ms

Active Audio Input Breakout Panel
Audio Input Connectors: 3-pin XLR socket

  • Pin 1: Signal/chassis ground
  • Pin 2: “Hot,” in phase input
  • Pin 3: “Cold,” inverted phase input

Input Impedance: 6 kΩ ±5% @1 kHz, balanced, AC coupled
Gain Setting: Unity
Maximum input level: +24 dBu, 20 Hz to 20 kHz
Input to output level deviation: ±.2 dB @1 kHz
Frequency response:

  • +0/-.12 dB, 20 Hz to 100 Hz
  • ±.015 dB, 100 Hz to 20 kHz

Signal to noise ratio, ref. +24 dBu:

  • ≥115 dB unweighted, 20 Hz to 20 kHz
  • ≥120 dB, A-weighting

Total harmonic distortion:

  • ≤.005% @ 1 kHz @20 dBu
  • ≤.02%, 20 Hz to 20 kHz @20 dBu

Intermodulation distortion: ≤.002% @20 dBu, SMPTE-DIN Method
Common Mode Rejection Ratio: ≥40 dBu, 20 Hz to 20 kHz
Adjacent channel crosstalk, ref. +24 dBu: ≥110 dB, 20 Hz to 20 kHz

Gain Setting: +10 dB

Maximum input level: +14 dBu, 20 Hz to 20 kHz
Input to output level deviation: +10 dB ±.2 dB @1 kHz
Frequency response:

  • +0/-.12 dB, 20 Hz to 100 Hz
  • ±.015 dB, 100 Hz to 20 kHz

Signal to noise ratio, ref.+14 dBu:

  • ≥105 dB unweighted, 20 Hz to 20 kHz
  • ≥110 dB, A-weighting

Total harmonic distortion:

  • ≤.006% @1 kHz @10 dBu
  • ≤.03%, 20 Hz to 20 kHz @10 dBu

Intermodulation distortion: ≤.005% @10 dBu, SMPTE-DIN Method
Common Mode Rejection Ratio: ≥40 dBu, 20 Hz to 20 kHz
Adjacent channel crosstalk, ref. +24 dBu: ≥105 dB, 20 Hz to 20 kHz

Gain Setting: +20 dB

Maximum input level: +4 dBu, 20 Hz to 20 kHz
Input to output level deviation: +20 dB ±.2 dB @1 kHz
Frequency response:

  • +0/-.12 dB, 20 Hz to 100 Hz
  • ±.015 dB, 100 Hz to 20 kHz

Signal to noise ratio, ref. +4 dBu:

  • ≥115 dB unweighted, 20 Hz to 20 kHz
  • ≥118 dB, A-weighting

Total harmonic distortion:

  • ≤.002% @1 kHz @0 dBu
  • ≤.01%, 20 Hz to 20 kHz @0 dBu

Intermodulation distortion: ≤.001% @0 dBu, SMPTE-DIN Method
Common Mode Rejection Ratio: ≥60 dBu, 20 Hz to 20 kHz
Adjacent channel crosstalk, ref.+24 dBu: ≥110 dB, 20 Hz to 20 kHz

Gain Setting: +30 dB

Maximum input level: -6 dBu, 20 Hz to 20 kHz
Input to output level deviation: +30 dB ±.2 dB @1 kHz
Frequency response:

  • +0/-.12 dB, 20 Hz to 100 Hz
  • ±.015 dB, 100 Hz to 20 kHz

Signal to noise ratio, ref. -6 dBu:

  • ≥105 dB unweighted, 20 Hz to 20 kHz
  • ≥110 dB, A-weighting

Total harmonic distortion:

  • ≤.003% @1 kHz @-10 dBu
  • ≤.01%, 20 Hz to 20 kHz @-10 dBu

Intermodulation distortion: ≤.002% @-10 dBu, SMPTE-DIN method
Common Mode Rejection Ratio: ≥60 dBu, 20 Hz to 20 kHz
Adjacent channel crosstalk, ref. +24 dBu: ≥105 dB, 20 Hz to 20 kHz

Gain Setting: +40 dB

Maximum input level: -16 dBu, 20 Hz to 20 kHz
Input to output level deviation: +40 dB ±.3 dB @1 kHz
Frequency response:

  • +0/-.12 dB, 20 Hz to 100 Hz
  • ±.015 dB, 100 Hz to 20 kHz

Signal to noise ratio, ref. -16 dBu:

  • ≥108 dB unweighted, 20 Hz to 20 kHz
  • ≥110 dB, A-weighting

Total harmonic distortion:

  • ≤.002% @1 kHz @-20 dBu
  • ≤.005%, 20 Hz to 20 kHz @-20 dBu

Intermodulation distortion: ≤.001% @-20 dBu, SMPTE-DIN method
Common Mode Rejection Ratio: ≥80 dBu, 20 Hz to 20 kHz
Adjacent channel crosstalk, ref. +24 dBu: ≥105 dB, 20 Hz to 20 kHz

Gain Setting: +50 dB

Maximum input level: -26 dBu, 20 Hz to 20 kHz
Input to output level deviation: +50 dB ±.2 dB @1 kHz
Frequency response:

  • +0/-.12 dB, 20 Hz to 100 Hz
  • ±.015 dB, 100 Hz to 20 kHz

Signal to noise ratio, ref. -26 dBu:

  • ≥100 dB unweighted, 20 Hz to 20 kHz
  • ≥102 dB, A-weighting

Total harmonic distortion:

  • ≤.004% @1 kHz @-30 dBu
  • ≤.01%, 20 Hz to 20 kHz @-30 dBu

Intermodulation distortion: ≤.001% @-30 dBu, SMPTE-DIN method
Common Mode Rejection Ratio: ≥80 dBu, 20 Hz to 20 kHz
Adjacent channel crosstalk, ref. +24 dBu: ≥100 dB, 20 Hz to 20 kHz
Output connector pin-out protocol: Tascam standard 8 channel balanced analog audio, 25-pin DB-25 socket

  • Output impedance: 33Ω ±5% @1 kHz, balanced, AC coupled
  • Maximum output level (clip): +24 dBu, ±.2 dB
  • Frequency response: +0/-3 dB @12 Hz to 100 Hz @Rload ≥600Ω

Note: Frequency response values stated in the “Unity to +50 dB” gain(s) section above can be achieved when the output load impedance is high, i.e., ≥10 kΩ

Phantom power, switchable:

  • Output voltage: -48V DC ±10%
  • Output current: 2 mA ±10% typical per input connector
  • Output short circuit current: 10 mA DC maximum per input connector
  • Source resistance: 6.8 kΩ ±1% per leg

Power consumption:

  • AC line input voltage: 90V AC to 240V AC @50/60 Hz
  • AC line input current: 100 mA AC maximum @120V AC

Intercom Expansion Panel
4-Wire Module
Input impedance: 600Ω ±5% @1 kHz, balanced, AC coupled
Maximum input level (clip): +10 dBm ±.5 dB @1 kHz
Frequency response: ±.5 dB, 50 Hz to 20 kHz
Signal to noise ratio, referred to +10 dBm:

  • >85 dB unweighted, 20 Hz to 20 kHz
  • >100 dB, A-weighting

Total harmonic distortion:

  • ≤.01% @ 1 kHz @ +6 dBm
  • ≤.05%, 20 Hz to 20 kHz

Intermodulation distortion: = ≤.003% @20 dBu, SMPTE-DIN method
Common Mode Rejection Ratio: ≥50 dBu, 20 Hz to 20 kHz

2-Wire Module

Clear-Com/TW (2-wire) Module
Standard Clear-Com Party Line Interface; “CC” “MODE” selected:

  • Channel 1 audio on XLR-A pin 3, Channel 2 audio on XLR-B pin 3
  • Audio level (properly nulled): 2 Vp-p ±5%, 70 Hz to 20 kHz
  • Channel 1: 30V DC +0/-8V DC on XLR-A pin 2
  • Channel 2: 30V DC +0/-8V DC on XLR-B pin 2, only when the “Power” switch is in the “WET” position
  • Termination: ≈200Ω; termination engaged only when the “Power” switch is in the “WET” position

Standard TW (RTS) Party Line Interface; “TW” “MODE” selected:

  • Channel 1 audio and 30V DC power on XLRs-A&B pin 2, Channel 2 audio on XLRs-A&B pin 3
  • Audio level (properly nulled): 2 Vp-p ±5%, 70 Hz to 20 kHz
  • 30V DC: +0/-8V DC on XLRs-A&B pin 2 only when the “Power” switch is in the “WET” position
  • Termination: ≈200Ω termination engaged only when the “Power” switch is in the “WET” position

Data Specifications
Data Bolt Card
RS-232 Mode
Input voltage range: >±3 Vp-p to <±25 Vp-p (.5V internal hysteresis)
Input bias current: ±100 μA maximum
Input impedance: 33 kΩ ±5%
ESD tolerance:  

  • ±15 kV air-gap
  • ±8 kV contact
  • ±15 kV HBM

Output voltage: ±5.5 Vp-p @±5%, Rload ≥3 kΩ
Data rate: DC to 160 kbaud (High speed limit determined by asynchronous sampling rate. Jitter is fixed @320 ns. Higher data rates (up to 1 Mbaud maximum) are possible if equipment driven has greater jitter tolerance).

RS-422, RS-485 Modes

Input voltage range: 100 mV to 12V differentially across “+” and “-” data input pins or 50 mV to 6V on either input with respect to GND (50 mV internal hysteresis)
Input Common Mode Range: +1.65V DC ±10%
Input bias current: ±600 μA maximum
Input impedance: 33 kΩ ±5% (For data rates ≥20 kb/s and/or multi-drop applications with longer cable lengths, an external 110Ω resistor is recommended across the “+” and “–” data inputs of the unit furthest from the driving source to properly terminate the line. This will minimize random bit errors induced by cable reflections.)
ESD tolerance:

  • ±15 kV air-gap
  • ±8 kV contact
  • ±15 kV HBM

Output voltage:

  • 0-3.3V per output unloaded
  • 0-1.85V per output at Rload 54Ω
  • 6.6 Vp-p output differential unloaded
  • 3.7 Vp-p output differential at Rload 110Ω

Data rate: DC to 200 kb/s (High speed limit determined by asynchronous sampling rate. Jitter is fixed @320 ns. Higher data rates (up to 1 Mb/s maximum) are possible if equipment driven has greater jitter tolerance).
Time delay after a transmitted data burst before a return message can be accepted at the receiver (RS-485 only): 16.4 μs

Data Format Inputs (Pins 21, 23, 24 and 26 on the DB-26 HD Data I/O Connector)

RS-422 mode: No connection, input pin left “floating”
RS-232 mode: Input pin either hardwired to ground (pins 22 and 25) or switched to ground by a remote GPI closure

  • Voltage on floating input pin: 3.3V ±2%
  • Input resistance when pulled to ground: 100 kΩ ±5%

RS-485 mode: Input pin either hardwired to “Format Bias” (pin 10) or switched to “Format Bias” by a remote GPI closure

  • Voltage on floating input pin: 3.3V ±2%
  • Input resistance when pulled to “Format Bias”: 9.1 kΩ ±5%

Format bias output (Pin 10 on the DB-26 HD data I/O connector):
Output voltage: 12V DC ±5%
Output current limit: 300 mA DC maximum

GPI Bolt Card
Inputs (Pins 1, 2, 3, 4, 5, 6, 7 and 8 on the DB-26 HD Data I/O Connector. GND on Pin 9)
Voltage on floating input pin: 3.3V ±2%
Input voltage for remote contact activation: ≤1V DC (typically grounded through GPI contacts; TTL/HCMOS level drive also suitable)
Input resistance when pulled to ground (GPI output activated): 5 kΩ ±1%

Output Contact Pairs (Pins 11&19, 12&20, 13 &21, 14&22, 15&23, 16&24, 17&25 and 18&26)

Contact format: 1 Form A (non-activated condition)
Contact resistance: 100 mΩ
Switching voltage: 125V AC, 110 V DC maximum
Contact rating: 2A @30V DC, 0.3A @125V AC (resistive load)
Maximum toggle rate: ≈5 Hz
Breakdown voltage:

  • Between open contacts: 750 Vrms for 1 minute
  • Between contact and coil: 1500 Vrms for 1 minute

Format Bias Output (Pin 10 on the DB-26 HD Data I/O connector)
Output voltage: 5V DC ±5%
Output current limit: 300 mA DC maximum
Note: The “Format Bias” pin is provided to supply a DC voltage source for low power loads that may be switched by the GPI output contacts, such as LEDs for Tally use etc.

Frame
TNR-FRAME
Thunder 1 RU Frame, holds up to 10 Bolt cards. 2 data, 1 GPI/O pair, two SFP slots and one fiber I/O panel
Thunder Bolt Processing Cards
TNR-BC-AA-TX8 Thunder Bolt card with 8-ch analog TX audio in, DB-25 female connector
TNR-BC-AA-RX8 Thunder Bolt card with 8-ch analog RX audio out, DB-25 female connector
TNR-BC-AES-TX4 Thunder Bolt card with 8-ch (4 pair) AES audio in, DB-25 female connector
TNR-BC-AES-RX4 Thunder Bolt card with 8-ch (4 pair) AES audio out, DB-25 female connector
TNR-BC-DATA-4 Thunder Bolt card with 4 bidirectional data. DB-26HD female connector
TNR-BC-GPI-8 Thunder Bolt card with 8 GPI/O pairs (8 TX, 8 RX). DB-26HD male connector
Breakout Panels
Passive Audio Panels
TNR-BP-AA-RX8 8-ch line level analog OUT XLR3 male
TNR-BP-AA-RX16 16-ch line level analog OUT XLR3 male
TNR-BP-AA-TX8 8-ch line level analog IN XLR3 female
TNR-BP-AA-TX16 16-ch line level analog IN XLR3 female
TNR-BP-AA-TR16 8x8 line level analog IN XLR3 female, OUT XLR3 male
TNR-BP-AES-RX-4BNC 4-ch digital AES unbalanced OUT BNC
TNR-BP-AES-TX-4BNC 4-ch digital AES unbalanced IN BNC
TNR-BP-AES-TR-8BNC 4-ch digital AES unbalanced IN BNC, 4-ch OUT BNC
Active Audio Panels
TNR-BP-AAMP-TX8 8-ch mic/line level analog IN XLR3 female
TNR-BP-AAMP-TX16 16-ch mic/line level analog IN XLR3 female
Data Panels
TNR-BP-DATA-48 4 DB9
TNR-BP-DATA-88 8 DB9
Intercom Panel
TNR-BP-ICM-8 Panel for 4 aux modules
Intercom Modules
ADDR-AUX-4W Intercom module — 4 wire each end
ADDR-AUX-CC Intercom module — ClearCom each end
ADDR-AUX-RTS Intercom module — RTS each end
Power Supply
ADAP-AC30V-X4 Universal AC to DC power supply for intercom modules. Included with TNR-BP-ICM-8
ADAP-AC12V-DIN Redundant AC to DC power supply for main frame, 12V DC output
Cables
CA-D25F-8XLR3M Thunder Audio OUT breakout cable, DB-25 male, 8 XLR3 male
CA-D25M-8XLR3F Thunder Audio IN breakout cable, DB-25 male, 8 XLR3 female
CA-D25MM-40 Thunder Audio interconnect cables, DB-25 male to DB-25 male, 40 cm length
CA-D25MM-80 Thunder Audio interconnect cables, DB-25 male to DB-25 male, 80 cm length
CA-HD26MF-80 Thunder Data/GPI interconnect cable, DB-26HD male to DB-26HD female, 80 cm length
Fiber Connector Plates
Fiber connector plates with dual fibers; use for non-redundant systems and redundant systems with WDMs
UFP-2ST 2 ST fiber connectors
UFP-2SC 2 SC fiber, ultra polished
UFP-2SCA 2 SC fiber, angle polished
UFP-2LC Dual LC connector
Fiber connector plates with dual fiber connector; use for non-redundant systems only
UFP-NOC2 Neutrik OpticalCon Duo 2 Fibers
UFP-MX2 MX dual fiber
UFP-NOC4 Neutrik OpticalCon Quad 4 Fibers
Fiber connector plates with quad fiber connectors; use for redundant systems without WDM
UFP-4ST 4 ST fiber connectors
UFP-4SC 4 SC fiber, ultra polished
UFP-4SCA 4 SC fiber, angle polished
UFP-4LC 2 Dual LC connectors

Thunder: 80 Channel Audio/Data/Intercom Link Datasheet

Thunder is the newest generation high-volume audio/data/intercom transport link from Grass Valley, a Belden Brand, Thunder transports up to 80 audio, intercom, or data paths, configurable in 8-path groups (10 groups total), all on one or two strands of fiber, at the lowest price and most compact size ever available.

Posted Sep 09 2016 (GVB-1-0184C-EN-DS) File Size: 3.7 MB

Read more »

See more related documents
Sales: USA +1 530 265 1000 / Canada +1 514 333 1772 / LATAM +1 305 213 8503 / EMEA +44 (0)118 952 3400 / Asia +852 2955 3260 / Customer Support
Copyright © 2017 Grass Valley Canada. All rights reserved. Legal Terms Privacy Careers About Us Contact Press View All Products