HDX-Plus, Power Plus 2 & SHED
Power Solutions for Broadcast Cameras
The new generation HDX-Plus allows you to extend the distance between the camera’s CCU and HDX-Plus over fiber, and supply power from the HDX-Plus over SMPTE hybrid cable to the camera. The HDX-Plus is compatible with Grass Valley’s LDX range of cameras and Sony cameras. In addition, when HDX-Plus is used with Power Plus 2, it can be matched with any camera manufacturer when either an Anton Bauer or IDX power plate is available. Power Plus 2 replaces the on-board battery and provides up to 200W over 3 km (1.86 mi.) to the camera. HDX-Plus is compatible with SHED-BS when SMPTE power is required to be eliminated and converted to a fiber-only connection from CCU to HDX-Plus. SHED stands for SMPTE...
FEATURES
- Allows the use of conventional single-mode fiber cable:
- Infrastructure fiber
- Tactical fiber cable
- Uses common ST, SC, LC, MX or OpticalCON connectors for the fiber link
- Uses common SMPTE ST 304 connectors for a hybrid link
- Extends manufacturer’s distance limits of the camera/CCU
- Long distance range:
- HDX-Plus to CCU distance over two fibers: up to 10 km (6.21 mi.; depends on camera manufacturer optical budget)
- HDX-Plus to Power Plus 2 distance over SMPTE hybrid cable: up to 5 km (3.1 mi.) with power
- Supports Grass Valley and Sony cameras
- Supports any camera manufacturer with HDX-Plus and Power Plus 2 link
- Anton/Bauer and V-Battery mounting options for Power Plus 2
- Wide operating temperature range
- Low power consumption
- SHEDs are small, lightweight adapters
- Built-in optical power meter
- Front panel status monitoring
- Fast plug and play operation
- All camera signals on lightweight fiber cable
- HDX also supports CopperHead and T-POV Systems
SPECIFICATIONS
Electro-Optical
Fiber type: Single mode
Note: HDX-Plus, Power Plus 2 and SHED are optically passive
Compatible Cameras
Grass Valley: LDX Series and Focus 70 & 75
Sony: Sony HDC-1K series, HDC-2K series and HDC-4K series
Mechanical/Environmental
Dimensions (W x H x D):
HDX-Plus: 209.55 x 76.20 x 406.40 mm (8.25 x 3 x 16 in.)
Power Plus 2: 108.71 x 167.64 x 63.50 mm (4.28 x 6.60 x 2.50 in.)
SHED: 190.5 x 50.8 x 63.5 mm (7.5 x 2 x 2.5 in.)
SHED-6: 441.96 x 44.45 x 228.6 mm (17.4 x 1.75 x 9 in.) Weight:
HDX-Plus: 2.72 kg (6.0 lbs.)
Power Plus 2: 1.25 kg (2.75 lbs.)
SHED: 0.45 kg (1 lbs.)
Temperature range:
HDX-Plus: -25° to 55° C (13° to 131° F)
Power Plus 2: -25° to 50° C (13° to 131° F) (with internal fan enabled)
SHED: -25° to 55° C (13° to 131° F)
Humidity range:
HDX-Plus: 0 to 95% RH
Power Plus 2: 0 to 95% RH
SHED: 0 to 95% RH
Power Consumption HDX-Plus with Power Plus 2: 85-265 VAC, 47-63 Hz., 450 VA max.
Power Output
Refer to chart in datasheet * Maximum length of SMPTE cable with power varies with the camera system configuration, lens type, viewfinder type, size of the optical fiber cable and the number of cable connectors
MEDIA GALLERY
ORDERING INFORMATION
| HDX-Plus | |
| HDX-PLUS | HDX-Plus,with LEMO, for PP2, LDX, Focus and Sony Cameras (UFP added under MTO) |
| UFP Plates | (Customer specifies fiber connector — only 1 allowed) |
| UFP-2LC | Dual LC connector |
| UFP-2SC | 2 SC fiber, ultra polished |
| UFP-2SCA | 2 SC fiber, angle polished |
| UFP-2STSM | 2 ST fiber connectors |
| UFP-MX2 | MX dual fiber |
| UFP-NOC2 | Neutrik OpticalCon Duo 2 Fibers |
| Options for HDX-Plus | |
| HDX-ENCL | HDX, HDX-Plus waterproof enclosure |
| Power Plus 2 | |
| PWRPL2-304-V | Power Plus 2 camera power adapter: SMPTE ST 304 dongle & SMPTE ST 304 receptacle on swivel, 17 VDC IDX V mount. HDX Plus required. |
| PWRPL2-304-AB | Power Plus 2 camera power adapter: SMPTE ST 304 dongle & SMPTE ST 304 receptacle on swivel, 17 VDC Anton/Bauer mount. HDX Plus required. |
| PWRPL2-NEU-AB | Power Plus 2 camera power adapter: Neutrik Optical Con on & SMPTE ST 304 receptacle on swivel, 17 VDC Anton/Bauer mount. HDX-Plus required. |
| PWRPL2-NEU-V | Power Plus 2 camera power adapter: Neutrik Optical Con on dongle & SMPTE ST 304 receptacle on swivel, 17 VDC IDX V mount. HDX-Plus required. |
| SHED | |
| SHED-BS | SMPTE Hybrid Elimination Device (SHED). Universal base station end. Stand alone (UFP required on both ends). |
| SHED-C | SMPTE Hybrid Elimination Device (SHED). Universal camera end. Stand alone (UFP required on both ends). |
UFP Plates for SHED-BS
One End (choose one from below):
UFP-304F Universal fiber panel – SMPTE ST 304 FEMALE
UFP-FIS Universal fiber panel – FISCHER FEMALE HYBRID
Second End (choose one from below):
UFP-2ST Universal fiber panel – 2 ST fiber connectors
UFP-2SC Universal fiber panel – 2 SC fiber, ultra polished
UFP-2SCA Universal fiber panel – 2 SC fiber, angle polished
UFP-2LC Universal fiber panel – Dual LC connector
UFP-NOC2 Universal fiber panel – Neutrik OpticalCon Duo (for tactical / unpowered fiber)
UFP-MX2 Universal fiber panel – MX dual fiber
UFP Plates for SHED-C
One End (choose one from below):
UFP-304M Universal fiber panel – SMPTE ST 304 MALE
UFP-FISM Universal fiber panel – FISCHER MALE HYBRID
Second End (choose one from below):
UFP-2ST Universal fiber panel – 2 ST fiber connectors
UFP-2SC Universal fiber panel – 2 SC fiber, ultra polished
UFP-2SCA Universal fiber panel – 2 SC fiber, angle polished
UFP-2LC Universal fiber panel – Dual LC connector
UFP-NOC2 Universal fiber panel – Neutrik OpticalCon Duo (for tactical/unpowered fiber)
UFP-MX2 Universal fiber panel – MX dual fiber
Options for SHED
SHED-TRAY
SHED tray fits 8 devices, 2 RU, rackmountable
