ADX-3981
3G/HD/SD 8 AES Audio & Metadata De-Embedder
The ADX-3981 is an advanced, high-quality audio processor which de-embeds up to eight AES signals at 48 kHz from a 3G/HD/SD video signal. The ADX-3981 can simultaneously process up to 32 channels of audio (16 channels from the embedded audio input plus others generated internally). Functions include downmixing, proc amp, mixing and loudness measurement. The ADX-3981 generates audio/video fingerprints (via an iControl option) to detect and measure lip-sync errors in a broadcast facility.

FEATURES
Video
- 3G/HD/SD input
- Supports 3 Gb/s level A (mapping 1) and level B
- Audio/video de-glitcher to handle video hot switch at the input
- Automatic detection of input video loss and switchover to local grey for continuous audio/video output synchronization
- Flexible HD/SD reference using the internal URS frame reference
- Minimum processing delay of 8 µs, but additional delay can be added up to 15 frames
- Optional optical fiber module
- Compatible with iControl end-to-end A/V fingerprint analyzer for lip sync error detection and measurement
Metadata
- AFD (SMPTE ST 2016), VLI (RP-186) and WSS insertion
- Linear timecode (LTC) embedding into DVITC (SD) or ATC (HD)
- Audio metadata insertion and extraction (SMPTE ST 2020-A)
- RS-422 serial data input and output to carry audio metadata
- 3 GPI I/O that can be inserted or extracted in the TC user bits. They can also be used for automation, user preset recall and loudness reset
Audio
- 8 AES outputs
- Full audio shuffling and mixing on a channel basis
- 32 channels internal audio processing
- Automation capabilities based on audio signal type detection
- Audio 5.1 surround downmix to Lt/Rt or Lo/Ro
- Audio dynamic processor option (compressor/limiter/expander)
- Audio delay adjustments of up to ±2 seconds to compensate for lip sync issues
- Loudness measurement of up to ±4 audio programs and logging with iControl loudness monitoring option
- Loudness compliant to EBU R128-2014, ATSC A/85:2013 (FCC CALM compliant) and ARIB TR-B32 (ITU-R BS.1770-3)
- On-board socket for 1 optional module expansion:
- Dolby E and Dolby Digital decoder
- Dolby Digital and Dolby Digital Plus encoder
- Dolby E encoder
- Linear Acoustic upMAX
- Linear Acoustic AEROMAX automatic loudness control
SPECIFICATIONS
Video Input/Output
- Signal (1):
- SMPTE ST 259-C (270 Mb/s)
- SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
- SMPTE ST 424 (2.970, 2.970/1.001 Gb/s)
- Supported formats:
- SD: 480i59.94, 576i50
- HD: SMPTE ST 274: 1080i59.94, 1080i50
- HD: SMPTE ST 296: 720p59.94, 720p50
- 3G: SMPTE ST 425 level A (mapping 1), level B: 1080p59.94, 1080p50
- Cable length:
- 300m (984 ft.) Belden 1694A at 270 Mb/s
- 150m (492 ft.) Belden 1694A at 1.485 Gb/s
- 120m (393 ft.) Belden 1694A at 2.970 Gb/s
- Return loss: >15 dB up to 3 GHz
- Jitter:
- HD/SD: <0.2 UI
- 3G: <0.3 UI
Audio Output (8)
- Sampling freq.:48 kHz
- Quantization:24 bits
- AES3
- Level: 2.75 Vp-p
- Impedance: 110Ω balanced
- AES-3id
- Level:1.0 Vp-p
- Impedance:75Ωunbalanced
- Return loss:15 dB at 6 MHz
Reference Input
- Signal (1):Through the URS internal frame reference signal
Optical
- Signal: Refer to SFP module specifications
LTC
- Signal (1):SMPTE ST 12
- Connectors:
- RJ45 (-3SRP rear)
- BNC (-3DRP rear)
- Impedance:<10 kΩ(bridging 600Ω) unbalanced
- Level: 0.3 to 5 Vp-p
GPIO (-3DRP rear)
- Signal (3):Contact closure to ground
- Direction:Bidirectional (application specific)
GPIO (-3SRP rear)
- Signal (2):Contact closure to ground
- Direction: Bidirectional (application specific)
RS-422
- Signal (2): RS-422
- Input level:300 mVp-p (min)
- Output level: 3 Vp-p (min)
- Rate:115,200 Bd
Video Processing Performance
- Signal path:10 bits
- Processing delay (HD): 8 μs (in minimum delay mode)
- Additional delay:Up to 15 frames upon user selection
Audio Processing Performance
- Quantization:24 bits
- Sampling: 48 kHz, synchronous
- Audio latency:2 to 6 ms max in minimum delay depending on processing options
- Audio delay:Up to 2s (1 ms steps)
Electrical
- Power: 12.5W
MEDIA GALLERY


ORDERING INFORMATION
Densité 3 frame | Description |
ADX-3981 | 3G/HD/SD 8 AES audio and metadata de-embedder |
ADX-3981-75D-3SRP | Single rear connector panel, 75 ohm Din 1.0/2.3 |
ADX-3981-110-3SRP | Single rear connector panel, 110 ohm |
ADX-3981-75-3DRP-F | Double rear connector panel, 75 ohm and fiber connector |
ADX-3981-110-3DRP-F | Double rear connector panel, 110 ohm and fiber connector |
Options (hardware) | |
SFP-RR-LC | Dual fiber RX (input) cartridge with LC/PC connector |
SFP-TT-S13S13-LC | Dual fiber TX (output) cartridge at 1310 nm with LC/PC connector |
SFP-R-LC | Single fiber RX (input) cartridge with LC/PC connector |
SFP-T-S13-LC | Single fiber TX (output) cartridge at 1310 nm with LC/PC connector |
SFP-RT-S13-LC | Single fiber RX (input) and TX (output) cartridge at 1310 nm with LC/PC connector |
Other types of SFP Optical Plug-In Cartridges may be available for this product. | |
NSH15M | HD-15 to terminal block adapter |
NSH26M | HD-26 to terminal block adapter |
MOD-DOLBY-ENC-E-2 | Dolby E encoder |
MOD-DOLBY-ENC-D-2 | Dolby Digital (AC-3) encoder |
MOD-DOLBY-DEC-2 | Dolby E and Digital (AC-3) decoder |
MOD-LA-DUP-701 | Upmixing using Linear Acoustic Technology upMAX |
MOD-LA-ALC-2 | 2-channel ALC licensed by Linear Acoustic |
MOD-LA-ALC-6 | 6-channel ALC licensed by Linear Acoustic |
MOD-LA-ALC-8 | 8-channel ALC licensed by Linear Acoustic |
MOD-LA-ALC-2-DUP | 2-channel ALC and upmix licensed by Linear Acoustic |
MOD-LA-ALC-6-DUP | 6-channel ALC and upmix licensed by Linear Acoustic |
MOD-LA-ALC-8-DUP | 8-channel ALC and upmix licensed by Linear Acoustic |
Remote control | iControl, iControl Solo, RCP-200 |