XVP-1801-SD
ARC & Frame Sync
The XVP-1801-SD is a dual standard (525/625) aspect ratio converter (ARC) and frame synchronizer with high quality video processing, using advanced motion adaptive de-interlacing. It is designed for use in facilities where 4:3 and 16:9 formats reside and conversion from one to the other is required. The converter features a second input which can be used as a background input to replace the black bars that would normally be there during a side panel or letterbox conversion. The ARC function offers fixed presets as well as variable user configurable aspect ratios. The support of AFD (Active Format Description) SMPTE-2016, VLI (Video Line Index) RP-186 and WSS allows the card to adjust its ARC...

FEATURES
- SD frame synchronizer with proc amp control (full YUV and RGB level)
- Advanced adaptive video de-interlacing for higher image quality
- Automatic ARC, using AFD (SMPTE-2016), VLI (RP-186) and WSS detection and correct re-insertion with the output
- Custom and fixed ARC presets
- Background keying capability during aspect ratio conversion which allows side panels or letterbox black bars to be filled with video or graphics
- Optional 16 channels of embedded full audio processing, shuffling and downmixing
- Optional 4 AES inputs and 4 AES outputs
- Perfect audio/video synchronization plus additional audio fixed delay of up to 2 seconds
- Compatible with Grass Valley audio processing cards, including the UAP-1783, AAP-1741 and DAP-1781
- Reference input
- RS-422 protocol and GPI ports for automation or external device control
- Multiple presets for save and recall
- Thumbnail and ALM streaming over IP
- Upgradeable to full XVP-1801 up/down/cross converter
- Audio metadata processing (SMPTE 2020-A)
SPECIFICATIONS
Video Inputs (2)
- Signal: SD: SMPTE-259M-C (270 Mb/s)
- Supported formats:
- SD: SMPTE-125M: 480i59.94
- SD: EBU: 576i50
- Embedded audio: SMPTE-299M-272
- Cable length: 340m (1,115 ft.) Belden 1694A at 270 Mb/s
- Return loss: >15 dB up to 1.5 GHz
Video Output
- Signal: SMPTE-259-C (270 Mb/s)
- Supported formats: SD: 480i59.94, 576i50
- Embedded audio: SMPTE-299M, SMPTE-272M
- Return loss: >15 dB up to 1.5 GHz
- Jitter: <0.2 UI
Reference Input
- Signal: SMPTE 170M/SMPTE 318M/ITU 624-4/BUT 470-6 blackburst
- Return loss: >35 dB up to 5.75 MHz
Video Processing Performance
- Signal path: 10 bits
- Latency:
- 1 frame in all modes
- Up to 6 frames of additional delay can be added
Audio Digital Inputs (4)
- Sampling freq.: 32 to 96 kHz
- Quantization: Up to 24 bits
- AES3
- Level: 0.2 to 7 Vp-p
- Impedance: 110Ω balanced
- AES3-id
- Level: 0.2 to 2 Vp-p
- Impedance: 75Ω
- Return loss: 15 dB at 6 MHz
Audio Digital Outputs (4)
- Sampling freq.: 48 kHz
- Quantization: 24 bits
- AES3
- Level: 3 Vp-p
- Impedance: 110Ω balanced
- AES-3id
- Level: 1.0 Vp-p
- Impedance: 75Ω
- Return loss: 15 dB at 6 MHz
Audio Processing Performance
- Quantization: 24 bits
- Sampling: 48 kHz
- Number of channels: 16 (4 groups)
- Freq. response: ±0.02 dB (20 Hz to 20 kHz)
- SNR: 123 dB (A weighted)
- THD+N: -138 dB (20 Hz to 20 kHz)
Miscellaneous
- Fixed delay: 0 to 2.0s
- Step: 1 ms (coarse), 1 sample (fine)
GPI (8)
- Connector: 15-pin D-Sub, opto-isolated
- GPI in:
- Input selection: 1, 2
- Presets: 1, 2, 3, 4
- GPI out: Provides status of selected input: 1 or 2
RS-422 (automation)
- Connector: RJ45
- Signal: OXTEL Series automation protocol
ABUS Connector/
- As per ABUS standard, Grass Valley
Test Pattern Generator
- Video: Color bars — 100% white bar with 75% color
- Audio:
- Left channel pulsed 1 kHz tone
- Right channel steady 1 kHz tone
Electrical
- Power: 17W
MEDIA GALLERY


ORDERING INFORMATION
Densité 2 frame | Densité 3 frame | Description | |
XVP-1801-SD | XVP-1801-SD-3RU | SD frame sync and ARC | |
XVP-1801-75-3DRP | Double rear connector panel, 75 ohm | ||
XVP-1801-110-3DRP | Double rear connector panel, 110 ohm | ||
XVP-1801-75-QRP | Quadruple rear connector panel, 75 ohm | ||
XVP-1801-110-QRP | Quadruple rear connector panel, 110 ohm | ||
Options (software) | Description | ||
XVP-1801-OPT-AUD16 | AES IO support and 16 channels on-board audio processing option | ||
XVP-1801-OPT-K | Background key input option | ||
XVP-1801-UG-SD2XVP | Upgrade from XVP-1801-SD to full XVP | ||
Options (hardware) | |||
BOC-DE15-4BNC-1 | 75 ohm digital audio breakout cable | ||
NSH15M | HD-15 to terminal block adapter | ||
Remote control | iControl, iControl Solo, RCP-200 |