XVP-1801-UC
HD Up Converter/ARC with Frame Sync
The Densité Series XVP-1801-UC provides high quality upconversion and frame synchronization. It offers many advanced features, including AFD support and background keying, with optional 16 channel embedded audio processing. The superior conversion quality of the XVP at both 50 and 59.94 Hz stems from multiple technologies, including advanced motion adaptive de-interlacing and anti-ringing. To ensure that upconverted television is presented in the correct aspect ratio when aired, the XVP module supports AFD (Active Format Description) SMPTE-2016. This provides automatic aspect ratio control using embedded control commands, and this prevents on-air aspect ratio errors such as the postage stamp...
FEATURES
- Upconverter with frame sync
- Advanced adaptive video de-interlacing for higher image quality
- Automatic detection of film sequences
- Automatic ARC, using AFD (SMPTE-2016), VLI (RP-186) and WSS detection and correct re-insertion with the output
- Custom and fixed ARC presets
- Background keying capability during up or down conversion which allows side panels or letterbox black bars to be filled with video or graphics
- Built-in proc amp, color correction and legalizer
- Processes and converts ancillary data such as CC (608/708) and timecode
- Perfect audio/video synchronization plus additional audio fixed delay of up to 2 seconds
- Optional 16 channels of embedded full audio processing, shuffling and downmixing
- Optional 4 AES inputs and 4 AES outputs
- Dolby E compatible
- Audio metadata processing (SMPTE 2020-A)
- Compatible with Grass Valley audio processing cards, including the UAP-1783, AAP-174 and DAP-1781
- Multiple presets for save and recall
- RS-422 Protocol and GPI ports for automation or external device control
- Thumbnail and ALM streaming over IP
- Can be upgraded in the field to the full XVP-1801 up/down/crossconverter specification
SPECIFICATIONS
Video Inputs (2)
- Signal: SD: SMPTE-259M-C (270 Mb/s)
- Supported formats:
- SD: SMPTE-125M: 480i59.94
- SD: EBU: 576i50
- Embedded audio: SMPTE-299M-272
- Cable length: 340m (1,115 ft.) Belden 1694A at 270 Mb/s
- Return loss: >15 dB up to 1.5 GHz
Video Output
- Signal: SMPTE 292M (1.485, 1.485/1.001 Gb/s)
- Supported formats:
- HD: SMPTE 274M: 1080i59.94/50
- HD: SMPTE 296M: 720p59.94/50
- Embedded audio: SMPTE-299M, SMPTE-272M
- Return loss: >15 dB up to 1.5 GHz
- Jitter: <0.2 UI
Reference Input
- Signal: SMPTE 170M/SMPTE 318M/ITU 624-4/BUT 470-6 blackburst
- Return loss: >35 dB up to 5.75 MHz
Video Processing Performance
- Signal path: 10 bits
- Latency:
- 1 frame in all modes
- Up to 6 frames of additional delay can be added
Audio Digital Inputs (4)
- Sampling freq.: 32 to 96 kHz
- Quantization: Up to 24 bits
- AES3
- Level: 0.2 to 7 Vp-p
- Impedance: 110Ω balanced
- AES3-id
- Level: 0.2 to 2 Vp-p
- Impedance: 75Ω
- Return loss: 15 dB at 6 MHz
Audio Digital Outputs (4)
- Sampling freq.: 48 kHz
- Quantization: 24 bits
- AES3
- Level: 3 Vp-p
- Impedance: 110Ω balanced
- AES-3id
- Level: 1.0 Vp-p
- Impedance: 75Ω
- Return loss: 15 dB at 6 MHz
Audio Processing Performance
- Quantization: 24 bits
- Sampling: 48 kHz
- Number of channels: 16 (4 groups)
- Freq. response: ±0.02 dB (20 Hz to 20 kHz)
- SNR: 123 dB (A weighted)
- THD+N: -138 dB (20 Hz to 20 kHz)
Miscellaneous
- Fixed delay: 0 to 2.0s
- Step: 1 ms (coarse), 1 sample (fine)
GPI (8)
- Connector: 15-pin D-Sub, opto-isolated
- GPI in:
- Input selection: 1, 2
- Presets: 1, 2, 3, 4
- GPI out: Provides status of selected input: 1 or 2
RS-422 (automation)
- Connector: RJ45
- Signal: OXTEL Series automation protocol
ABUS Connector
- As per ABUS standard, Grass Valley
Test Pattern Generator
- Video: Color bars — 100% white bar with 75% color
- Audio:
- Left channel pulsed 1 kHz tone
- Right channel steady 1 kHz tone
Electrical
- Power: 17W
MEDIA GALLERY
ORDERING INFORMATION
| Densité 2 frame | Densité 3 frame | Description | |
| XVP-1801-UC | XVP-1801-US-3RU | HD/SD Upconverter/Frame Sync/ARC | |
| XVP-1801-75-3DRP | Double rear connector panel, 75 ohm | ||
| XVP-1801-110-3DRP | Double rear connector panel, 110 ohm | ||
| XVP-1801-75-QRP | Quadruple rear connector panel, 75 ohm | ||
| XVP-1801-110-QRP | Quadruple rear connector panel, 110 ohm | ||
| Options (software) | Description | ||
| XVP-1801-OPT-AUD16 | AES IO support and 16 channels on-board audio processing option | ||
| XVP-1801-OPT-K | Background key input option | ||
| XVP-1801-UG-UC2XVP | HD/SD Upconverter/Frame Sync/ARC | ||
| Options (hardware) | |||
| BOC-DE15-4BNC-1 | 75 ohm digital audio breakout cable | ||
| NSH15M | HD-15 to terminal block adapter | ||
| Remote control | iControl, iControl Solo, RCP-200 | ||
