Skip to main content
Contact Us

SFP-U-TT-S13S13-LC

12 Gb/s Dual Channel 1310 nm Optical Transmitter Cartridge with Duplex LC

The SFP-U-TT-S13S13-LC is a dual channel single mode optical transmitter that supports signals up to 12 Gb/s as per SMPTE ST 2082, SMPTE ST 259, SMPTE ST 292 and SMPTE ST 424, including SDI pathological test patterns described in SMPTE engineering guideline SMPTE EG 34 and SMPTE recommended practices SMPTE RP 178 and SMPTE RP 198. The unit uses two independent 1310 nm multiple quantum well DFB laser transmitters.

FEATURES

  • SMPTE ST 297-1:2015 compatible
  • 12G/3G/HD/SD SDI: 
    • SMPTE ST 2082, SMPTE ST 424, SMPTE ST 292
    • SMPTE ST 259-ABCD compliant
  • Supports video pathological patterns for SD-SDI, HD-SDI, 3G-SDI and 12G-SDI
  • Based on Industry Standard SFP+
  • Distance up to 10 km for 12G-SDI
  • Dual transmitter with duplex LC
  • RoHS 6/6 compliant
  • Hot pluggable
  • Class 1 Laser International Safety Standard IEC-60825 Compliant

SPECIFICATIONS

Parameter Symbol Min. Typ. Max. Units Notes



Transmitter Specifications (0°C < Topr < 70°C, 3.13V < Vcc < 3.47V)

Average Launch Power Po, avg -5   1 dBm Output power is power coupled into a 9/125 µm single mode fiber<
Output Center Wavelength λc 1260 1310 1360 nm  
Output Spectrum Width σλ     1 nm -20 dB width
Side Mode Suppression Ratio SMSR 30     dB  
Extinction Ratio ER -3.5        
Relative Intensity Noise RIN     -128 dB/Hz  
Average Launch Power of OFF Transmitter       -30 dBm  



Absolute Maximum Ratings — Exposure to absolute maximum rating conditions for extended periods may affect device reliability

Storage Temperature Tstg -40   85 °C  
Operating Case Temperature Topr 0   70 °C  


Note: Only connections with patch cords with PC or UPC connectors are supported. 

ORDERING INFORMATION

Part Number Type Maximum Bit Rate (Gb/s) TX1 TX2 Package Temp (°C) RoHS Compliant
λ (nm) Power (dBm) λ (nm) Power (dBm)
SFP-U-TT-S13S13-LC 2-TX 12 1310 DFB 1 to -5 1310 DFB 1 to -5 LC SFP+ with DMI 0 to 70 Yes



Related Products

Part Number Type Maximum Bit Rate (Gb/s) TX Rx Package Temp (°C) RoHS Compliant
λ (nm) Power (dBm) λ (nm) Power (dBm)
SFP-U-R-LC 1-RX 12     1260/1620 -2 to -11 LC SFP+ with DMI 0 to 70 Yes
SFP-U-RR-LC 2-RX 12     1260/1620 -2 to -11 LC SFP+ with DMI 0 to 70 Yes
SFP-U-T-S13S13-LC 1-TX 12 1310 DFB 1 to -5     LC SFP+ with DMI 0 to 70 Yes
SFP-U-RT-S13-LC 1-TX + 1-RX 12 1310 DFB 1 to -5 1260/1620 -2 to -11 LC SFP+ with DMI 0 to 70 Yes

DOCUMENTS & DOWNLOADS

DATASHEETS

Small Form-factor Pluggable (SFP) Optical Module Cartridges (12G Video)

The Small Form-factor Pluggable (SFP) optical module cartridges for video are small, hot-pluggable devices used to provide fiber connectivity to 12G/3G/HD/SD SDI products from either a Densité frame (they can be used with any 12G video card that has a rear module with an "F" name suffix (i.e., HDA-3961-3SRP-HF), irrelevant of which Densité frame is hosting the card), IQ Modular 12G SDI card such as the IQSDA4100-1B4, IQSDA4200-1B4 and the KudosPro UHD-1200.

Download
Go back to top