SFP-RT-S13-LC
1310 nm Optical Transceiver Cartridge with Duplex LC
The SFP-RT-S13-LC is a single mode optical transceiver that supports signals up to 3 Gb/s as per SMPTE ST 259, SMPTE ST 292 and SMPTE ST 424, including SDI pathological test patterns described in SMPTE engineering guideline SMPTE EG 34 and SMPTE recommended practices SMPTE RP 178 and SMPTE RP 198.

FEATURES
- SMPTE ST 297:2006 compatible
- 3G/HD/SD SDI:
- SMPTE ST 424, SMPTE ST 292
- SMPTE ST 259-ABCD compliant
- Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
- Single transmitter with simplex LC
- Single receiver with simplex LC
- RoHS-6 compliant
- Hot pluggable
SPECIFICATIONS
Transmitter Specifications (0°C < Tc < 70°C, 3.13V < Vcc < 3.47V) |
||||||
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Units |
Notes |
Optical |
||||||
Optical Transmit Power |
Po |
-5 |
-2 |
0 |
dBm |
Output power is power coupled into a 9/125 mm single mode fiber. |
Output Center Wavelength |
λ |
1290 |
1310 |
1330 |
nm |
At 25°C |
Output Spectrum Width |
Δλ |
— |
1.5 |
3 |
nm |
RMS (σ) |
Extinction Ratio |
ER |
5 |
7.5 |
|
dB |
|
Relative Intensity Noise |
RIN |
|
|
-120 |
dB/Hz |
|
Optical Rise Time / Fall Time |
tr / tf |
|
|
135 |
ps |
SMPTE ST 424, 0% to 80%, unfiltered |
|
|
270 |
ps |
SMPTE ST 292, 0% to 80%, unfiltered |
||
|
|
800 |
ps |
SMPTE ST 344, 0% to 80%, unfiltered |
||
|
|
1.5 |
ns |
SMPTE ST 259, 0% to 80%, unfiltered |
||
Electrical |
||||||
Differential Input Voltage |
VIH - VIL |
200 |
|
1200 |
mVp-p |
AC Coupled Input |
Disable Input Voltage — Low |
VTDIS,L |
0 |
|
0.8 |
V |
TX Output Enabled |
Disable Input Voltage — High |
VTDIS,H |
2.0 |
|
Vcc+0.3 |
V |
TX Output Disabled |
Output TX_Fault — Low |
VOL |
0 |
|
0.5 |
V |
|
Disable TX_Fault — High |
VOH |
2.5 |
|
Vcc+0.3 |
V |
|
SCL, SDA |
VOH |
2.5 |
|
Vcc+0.3 |
V |
|
VOL |
0 |
|
0.5 |
V |
||
Receiver Specifications (0°C < Tc < 70°C, 3.13V < Vcc < 3.47V) |
||||||
Optical |
||||||
Wavelength of Operation |
|
1260 |
— |
1620 |
nm |
|
Sensitivity for SMPTE ST 424 2.97 Gb/s |
Sen |
|
|
-21 |
dBm |
Pathological |
Overload |
|
-3 |
|
|
dBm |
|
Signal Detect — Asserted |
Pa |
— |
— |
-22 |
dBm |
Transition: low to high |
Absolute Maximum Ratings — Exposure to absolute maximum rating conditions for extended periods may affect device reliability |
||||||
Storage Temperature |
Tstg |
-40 |
|
85 |
°C |
|
Operating Case Temperature |
Tc |
-20 |
|
85 |
°C |
|
Power Supply Voltage |
Vcc |
0 |
|
4 |
V |
|
ESD Tolerance on All Pins |
|
|
|
1 |
KV HBM |
|
Relative Humidity |
— |
5 |
|
95 |
% RH |
Non-condensing |
Recommended Operating Conditions |
||||||
Power Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
Operating Case Temperature |
Tc |
0 |
|
70 |
°C |
|
Baud Rate |
|
<50 |
|
3000 |
Mb/s |
|
Power Supply Current |
Icc |
|
200 |
300 |
mA |
Note: Only connections with patch cords with PC or UPC connectors are supported.
Note: All receiver channels (R) are wideband, responding to wavelengths ranging from 1260 to 1620 nm, compatible with standard 1310 nm and CWDM wavelengths, except for the receiver from the WDM Series.
MEDIA GALLERY

ORDERING INFORMATION
Part Number |
Type |
Maximum Bit Rate (Mb/s) |
TX |
RX |
Package |
Temp (°C) |
RoHS Compliant |
||
λ (nm) |
Power (dBm) |
λ (nm) |
Sen. (dBm) |
||||||
SFP-RT-S13-LC |
1-TX+1-RX |
3000 |
1310 |
-5 to 0 |
1260/1620 |
-21 |
LC SFP with DMI |
0 to 70 |
Yes |
Related Products |
RX1 |
RX2 |
|||||||
SFP-RR-LC |
2-RX |
3000 |
1260/1620 |
-21 |
1260/1620 |
-21 |
LC SFP with DMI |
0 to 70 |
Yes |
SFP-R-LC |
1-RX |
3000 |
1260/1620 |
-21 |
|
|
LC SFP with DMI |
0 to 70 |
Yes |