Skip to main content
Login Contact Us

SFP-T-S13-LC

Single Channel 1310 nm Optical Transmitter Cartridge with Simplex LC

The SFP-T-S13-LC is a single channel single mode optical transmitter that supports signals up to 3 Gb/s as per SMPTE ST 259, SMPTE ST 292 and SMPTE ST 424, including SDI pathological test patterns described in SMPTE engineering guideline SMPTE EG 34 and SMPTE recommended practices SMPTE RP 178 and SMPTE RP 198. The unit uses a Fabry-Perot 1310 nm laser transmitter.

FEATURES

  • SMPTE ST 297:2006 compatible
  • 3G/HD/SD SDI:
    • SMPTE ST 424, SMPTE ST 292
    • SMPTE ST 259-ABCD compliant
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Single transmitter with simplex LC
  • RoHS-6 compliant
  • Hot pluggable

SPECIFICATIONS

Transmitter Specifications (0°C < Tc < 70°C, 3.13V < Vcc < 3.47V)

Parameter

Symbol

Min

Typ

Max

Units

Notes



Optical

Optical Transmit Power

Po

-5

-2

0

dBm

Output power is power coupled into a 9/125 mm single mode fiber

Output Center Wavelength

λ

1290

1310

1330

nm

At 25°C

Output Spectrum Width

Δλ

1.5

3

nm

RMS (σ)

Extinction Ratio

ER

5

7.5

 

dB

 
Relative Intensity Noise

RIN

 

 

-120

dB/Hz

 
Optical Rise Time / Fall Time

tr / tf

 

 

135

ps

SMPTE ST 424, 20% to 80%, unfiltered

 

 

270

ps

SMPTE ST 292, 20% to 80%, unfiltered

 

 

1.5

ns

SMPTE ST 259, 20% to 80%, unfiltered



Electrical

Differential Input Voltage

VIH - VIL

200

 

1200

mVp-p

AC Coupled Input

Disable Input Voltage — Low

VTDIS,L

0

 

0.8

V

TX Output Enabled

Disable Input Voltage — High

VTDIS,H

2.0

 

Vcc+0.3

V

TX Output Disabled

SCL, SDA

VOH

2.5

 

Vcc+0.3

V

 

VOL

0

 

0.5

V

 



Absolute Maximum Ratings — Exposure to absolute maximum rating conditions for extended periods may affect device reliability

Storage Temperature

Tstg

-40

 

85

°C

 
Operating Case Temperature

Tc

-20

 

85

°C

 
Power Supply Voltage

Vcc

0

 

4

V

 
ESD Tolerance on All Pins

 

 

 

1

KV HBM

 
Relative Humidity

5

 

95

% RH

non-condensing



Recommended Operating Conditions

Power Supply Voltage

Vcc

3.13

3.3

3.47

V

 
Operating Case Temperature

Tc

0

 

70

°C

 
Baud Rate

 

<50

 

3000

Mb/s

 
Power Supply Current

Icc

 

130

180

mA

 

 

Note: Only connections with patch cords with PC or UPC connectors are supported.

ORDERING INFORMATION

Part Number

Type

Maximum Bit Rate (Mb/s)

TX

RX

Package

Temp (°C)

RoHS Compliant

λ (nm)

Power (dBm)

λ (nm)

Sen. (dBm)

Related Products
SFP-RR-LC

2-RX

3000

 

 

1260/1620

-21

LC SFP with DMI

0 to 70

Yes

SFP-R-LC

1-RX

3000

 

 

1260/1620

-21

LC SFP with DMI

0 to 70

Yes

 

Note: Only connections with patch cords with PC or UPC connectors are supported.

DOCUMENTS & DOWNLOADS

DATASHEETS

Small Form-factor Pluggable (SFP) Optical Module Cartridges (Video)

The Small Form-factor Pluggable (SFP) optical module cartridges for video are small, hot-pluggable devices used to provide fiber connectivity to 3G/HD/SD SDI products from either a Densité frame (they can be used with any video card that has a rear module with an "F" name suffix (i.e., HDA-193N-DRP-F), irrelevant of which Densité frame is hosting the card), standard (not hybrid) NVISION 8500 Series routers, LUMO cards and PicoLink FIO-991p. By using single-mode fiber instead of coaxial cables, these interfaces can be used over much longer distances without degrading signal quality, which is very useful when carrying 3G signals.

Download

DOCUMENTATION LIBRARY

Further documents

Already know what you're looking for? Click the link below to access our full documentation library

Visit Library
Go back to top