Skip to main content
Login Contact Us

SFP-TT-S13S13-LC

Dual Channel 1310 nm Optical Transmitter Cartridge with Duplex LC

Small form-factor pluggable (SFP) optical module video cartridge for Densité frames, standard NVISION 8500 Series routers and LUMO cards.

The SFP-TT-S13S13-LC is a dual channel single mode optical transmitter that supports signals up to 3 Gb/s as per SMPTE ST 259, SMPTE ST 292 and SMPTE ST 424, including SDI pathological test patterns described in SMPTE engineering guideline SMPTE EG 34 and SMPTE recommended practices SMPTE RP 178 and SMPTE RP 198. The unit includes two independent Fabry-Perot 1310 nm laser transmitters. 

FEATURES

  • SMPTE ST 297:2006 compatible
  • 3G/HD/SD SDI:
    • SMPTE ST 424, SMPTE ST 292
    • SMPTE ST 259-ABCD compliant
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Dual transmitter with duplex LC
  • RoHS-6 compliant
  • Hot pluggable

SPECIFICATIONS

Transmitter Specifications (0°C < Tc < 70°C, 3.13V < Vcc < 3.47V)
Parameter Symbol Min. Typ. Max. Units Notes
Optical
Optical Transmit Power Po -5 -2 0 dBm Output power is power coupled into a 9/125 mm single mode fiber
Output Center Wavelength l 1290 1310 1330 nm At 25°C
Output Spectrum Width Dl 1.5 3 nm RMS (σ)
Extinction Ratio ER 5 7.5   dB  
Relative Intensity Noise RIN     -120 dB/Hz  
Optical Rise Time / Fall Time tr / tf     135 ps SMPTE ST 424, 20% to 80%, unfiltered
    270 ps SMPTE ST 292, 20% to 80%, unfiltered
    1.5 ns SMPTE ST 259, 20% to 80%, unfiltered
Electrical
Differential Input Voltage VIH - VIL 200   1200 mVp-p AC Coupled Input
Disable Input Voltage — Low VTDIS,L 0   0.8 V TX Output Enabled
Disable Input Voltage — High VTDIS,H 2.0   Vcc+0.3 V TX Output Disabled
SCL, SDA VOH 2.5   Vcc+0.3 V  
VOL 0   0.5 V  
Absolute Maximum Ratings — Exposure to absolute maximum rating conditions for extended periods may affect device reliability
Storage Temperature Tstg -40   85 °C  
Operating Case Temperature Tc -20   85 °C  
Power Supply Voltage Vcc 0   4 V  
ESD Tolerance on All Pins       1 KV HBM  
Relative Humidity 5   95 % RH Non-condensing
Recommended Operating Conditions
Power Supply Voltage Vcc 3.13 3.3 3.47 V  
Operating Case Temperature Tc 0   70 °C  
Baud Rate   <50   3000 Mb/s  
Power Supply Current Icc   200 300 mA  

ORDERING INFORMATION

Part Number Type Maximum Bit Rate (Mb/s) TX RX Package Temp (°C) RoHS Compliant
λ (nm) Power (dBm) λ (nm) Sen. (dBm)  
SFP-TT-S13S13-LC 2-TX 3000 1310 -5 to 0     LC SFP with DMI 0 to 70 Yes
Related Products
SFP-RR-LC 2-RX 3000     1260/1620 -21 LC SFP with DMI 0 to 70 Yes
SFP-T-S13-LC 1-TX 3000 1310 -5 to 0     LC SFP with DMI 0 to 70 Yes
SFP-R-LC 1-RX 3000     1260/1620 -21 LC SFP with DMI 0 to 70 Yes
SFP-RT-S13-LC 1-TX+1-RX 3000 1310 -5 to 0 1260/1620 -21 LC SFP with DMI 0 to 70 Yes



Note: Only connections with patch cords with PC or UPC connectors are supported.

DOCUMENTS & DOWNLOADS

DATASHEETS

Small Form-factor Pluggable (SFP) Optical Module Cartridges (Video)

The Small Form-factor Pluggable (SFP) optical module cartridges for video are small, hot-pluggable devices used to provide fiber connectivity to 3G/HD/SD SDI products from either a Densité frame (they can be used with any video card that has a rear module with an "F" name suffix (i.e., HDA-193N-DRP-F), irrelevant of which Densité frame is hosting the card), standard (not hybrid) NVISION 8500 Series routers, LUMO cards and PicoLink FIO-991p. By using single-mode fiber instead of coaxial cables, these interfaces can be used over much longer distances without degrading signal quality, which is very useful when carrying 3G signals.

Download

DOCUMENTATION LIBRARY

Further documents

Already know what you're looking for? Click the link below to access our full documentation library

Visit Library
Go back to top