KudosPro-IP
KudosPro-IP processing units can form a core component of any IP system and help broadcasters migrate from traditional baseband SDI video and audio processing to new hybrid or fully IP workflows. KudosPro-IP is equipped with a Grass Valley video-over-IP transceiver, providing up to four broadcast-quality processing channels with IP inputs and outputs conforming to SMPTE ST 2110, 2022-6 and 2022-7 over 10 GbE links and available in just 1 RU. KudosPro-IP also fully integrates with GV Orbit IP routing and control system, making integration simple and straightforward.

FEATURES
- Dual- or quad-channel SD/HD/3G up/down/crossconversion, and processing over dual 10 GbE IP links
- Multiple transport types available for each processing channel including:
- Compressed IP transport using SMPTE ST 2042 (VC2) low-latency high-quality encoding profile
- Uncompressed video transport using either VSF TR-03 and TR-04 RTP (SMPTE ST 2110), or SMPTE ST 2022-6 encapsulation
- PCM audio using TR-03 & AES67
- SMPTE ST 291 metadata support via IETF standard “RTP Payload for Ancillary Data”
- Supports unicast as well as IGMPv3 source specific multicast, allowing point to point operation or transmission in multicast groups
- Supports configuration of Ethernet links for maximum signal transport using both SFPs, or for dual link mode to provide link redundancy as per SMPTE ST 2022-7
- 16-channel embedded audio processing for each video channel
- Automatic aspect ratio conversion (AFD, VI, L23)
- Powerful picture enhancement tools and clean-cut mode
- Closed caption and timecode handling
- Caption generator
- Logo inserter, sidebar keyer and HDMI monitoring output
Applications
- Easily integrate common broadcast processing tasks into IP workflows
SPECIFICATIONS
Ethernet Signal
SFP+ Optical 2x 10G Ethernet
Conforms to IEEE 802.3ae – 10 GbE over fiber
SFP+ connected cable 2x 10G Ethernet
Conforms to IEEE 802.3ak – 10 GbE over twinaxial cables
Note: SFP type must be ordered in addition to the module.
Signal Inputs
4x SD/HD/3G serial digital with embedded audio
Input standards:
- 3 Gb/s SD-SDI, SMPTE ST 425 level A, level B
- 1.5 Gb/s HD-SDI SMPTE ST 292 / SMPTE ST 299
- 270 Mb/s SD-SDI SMPTE ST 259
Reference: 1x loop-through HDTV Tri-sync/SD Bi-sync (blackburst) SMPTE ST 240/SMPTE ST 274
Audio AES: 4x balanced AES inputs via 25-way D-Type
Audio Analog: 4x stereo analog inputs via 25-way D-Type
Signal Outputs
4 SD/HD/3G serial digital with embedded audio
Output standards:
- 3 Gb/s HD-SDI, SMPTE ST 425 level A, level B
- 1.5 Gb/s HD-SDI SMPTE ST 292 / SMPTE ST 299
- 270 Mb/s SD-SDI SMPTE ST 259
Audio AES: 4x balanced AES outputs via 25-way D-Type
Audio analog: 2x stereo analog outputs via 25-way D-Type
Input Standards
- (Auto detect) 525, 625
- 720 50/59.94/60p
- 1080 50/59.94/60i
- 1080 50/59.94/60p (Levels A and B)
- 720/1080 23.98/24/25/29/30p
- 1080 23.98/24/25/29PsF
Output Standards
- 525, 625
- 720 50/59.94/60p
- 1080 50/59.94/60i
- 1080 50/59.94/60p (Levels A and B)
- 720/1080 23.98/24/25/29/30p
- 1080 23.98/24/25/29PsF
Conversion Functions
Modes: SD/HD/3G up/down/crossconversion at the same frame rate
Manual or Automatic ARC
AFD: (SMPTE ST 2016), VI (RP186), WSS (L23)
SD input format: Normal 4:3, Anamorphic 16:9, Letterbox 14:9, Letterbox 16:9
SD output format: Normal 4:3, Anamorphic 16:9, Letterbox 14:9, Letterbox 16:9
Auto zoom: On/Off
Manual zoom: Zoom ±20%
Safe area marker: Off, 16:9, 4:3
Manual controls: size, aspect, pan, tilt
Wide range of ARC presets including 702 sample line mode
Audio Functions
Analog Audio:
- Four pairs of analog inputs are individually available to any or all processing channels
- Two groups (2 pairs) of analog output are separately assignable to any processing channel
- Headroom +24 dBu; balanced connection
AES Audio:
- Four AES audio inputs are individually available to any or all processing channels
- Four AES audio outputs (48 kHz) are separately assignable to any processing channel
- AES input is auto-detected as PCM (32-96 kHz) or non-PCM (48 kHz locked to relevant video input)
Embedded Audio:
- Each processing channel includes 16-channel embedded audio processing
- PCM audio processing includes channel level gain and delay compensation, as well as channel level routing/shuffle with audio phase inversion
- Non-PCM processing features pair level routing and delay compensation
- Dolby-E data is passed with a delay to match the video and with co-timed audio frame drop or repeat
Metadata
Closed caption CEA608 <> CEA708
Timecode conversions
WST/SMPTE RDD08/SMPTE ST 2031 conversion
Enhancement
Advanced Horizontal Enhancement:
- Frequency band selection (Low, Med, High)
- 4 preset enhancement levels (Low, Med, High, Super)
- Custom H Gain and H Noise rejection levels
Advanced Vertical Enhancement:
- Frequency band selection (Low, Med, High)
- 5 preset enhancement levels (Soft 2, Soft 1, Normal, Sharp 1, Sharp 2)
Horizontal Aperture:
- 5 preset H sharpness levels (Low 2, Low 1, Normal, High 1, High 2)
- 5 preset H detail levels (Soft 2, Soft 1, Normal, Sharp 1, Sharp 2)
Noise reduction: spatial, recursive
System
Pattern Off , Black, Ramp, Bars
Proc amp:
Black Level: +100 to -100 mV (0) in 0.8 mV steps
Contrast: -6 dB to +6 dB (0) in 0.2 dB steps
Saturation: -6 dB to +6 dB (0) in 0.2 dB steps
Y Gamma: 0.4 to 1.7 (1) in 0.1 steps
Freeze: On/Off
Genlock: Reference lock, Input lock (same format), Follow input (same frame rate), Free run
Memories: 16 user memories
Legalizer
EDH support
Communications
Remote control via web interface and RollCall network (IP) and SNMP
Power (Primary and Secondary)
Input voltage range: 100 – 240 VAC, 50/60 Hz 1.5A (max.) via three-pin IEC power socket
Mechanical
Temperature range: 0 to 45° C (32° to 113° F) operating
Cooling: Internal fan, side venting
Weight: Approximately 4.25 kg (9.4 lbs.)
Case type: 1 RU, rack mounting
Dimensions: 44 x 430 x 400 mm (1.73 x 16.9 x 15.7 in.) (HxWxD)
Headphones socket with volume control
GPIO: 8 available
MEDIA GALLERY






ORDERING INFORMATION
KPRO-IPMC210
KudosPro-IP-MC: Dual-channel video & audio processing unit with integrated IP interfacing module. Featuring motion compensated frame rate/format conversion, frame synchronization, ARC control, noise reduction, side-bar keying, logo insertion, CC, WST and timecode handling, picture enhancement tools, 16-channel audio processing inc gain, delay & shuffling. 10 GbE IP (SMPTE ST 2022-6, SMPTE ST 2110, TR-03, VC2), GPI, balanced AES and analog audio I/O. HDMI monitor output & dual PSUs.
KPRO-IPLC410
KudosPro-IP-LC: Quad channel video & audio processing unit with integrated IP interfacing module. Featuring linear frame rate/format conversion, frame synchronization, ARC control, noise reduction, side-bar keying, logo insertion, CC, WST and timecode handling, picture enhancement tools, 16-channel audio processing inc gain, delay & shuffling. 10 GbE IP (SMPTE ST 2022-6, SMPTE ST 2110, TR-03, VC2), GPI, balanced AES and analog audio I/O. HDMI monitor output & dual PSUs.
KPRO-IPSV410
KudosPro-IP-SV: Quad channel video & audio processing unit with integrated IP interfacing module. Featuring format conversion, frame synchronization, ARC control, noise reduction, side-bar keying, logo insertion, CC, WST and timecode handling, picture enhancement tools, 16-channel audio processing inc gain, delay & shuffling. 10 GbE IP (SMPTE ST 2022-6, SMPTE ST 2110, TR-03, VC2), GPI, balanced AES and analog audio I/O. HDMI monitor output & dual PSUs.
Fiber SFP Options for Fiber — A&B
FC1-13TR: Transceiver 1310 nm/Rx
FC1-13T1: Single 1310 nm Tx
FC1-13T2: Dual 1310 nm Tx
FC1-R1: Single Rx
FC1-R2: Dual Rx
FC1-HDBT2: HD-BNC Dual Tx
FC1-HDBR2: HD-BNC Dual Rx
CWDM Tx wavelengths available on request
SFP 10 GbE Options
FCS-10GE-SR: 10GBASE-SR short range SFP for MMF
FCS-10GE-LR: 10GBASE-LR long range SFP for SMF
FCS-10GE-ER: 10GBASE-ER extended range SFP for SMF
Note: Fiber SFP type must be ordered in addition to the module.