IQADA01
Analog Audio Distribution Amplifier — 2x7 Outputs
The IQADA01 provides dual analog inputs with up to seven outputs per input, or a single analog input with up to 14 outputs.

FEATURES
- Configurable for 1 input to 14 outputs, or 2 inputs to 7 outputs per input
- Very low THD+N
- Output gain remotely adjustable from +24 dB to -24 dB with fine control
- +24 dBu headroom
SPECIFICATIONS
Inputs and Outputs
Signal Inputs
Analog: 2 channels balanced via 25-way D-type connector
Signal Outputs
Analog: 7 per input channel balanced via 25-way D-type connector
Note: Configurable for 1 input to 14 output operation
Card Edge and Remote Controls
Indicators
Power up or CPU fault: Good = Off/Fault = Red
CPU running but input 1 not detected (both inputs or primary input when in single
channel mode): Input detected = Off/Not Detected = Yellow
CPU running but input 2 not detected (both inputs or primary input when in single channel mode): Input detected = Off/Not detected = Yellow
Normal operation with input detected (either input or primary input when in single channel mode): Input not detected = Off/Input detected = Green
Controls
Mode: Single, dual channel
Fine gain adjustmen:t ±0.5 dB additional to the coarse gain level, separately adjustable for each input
Remote Control Functions
Gain (separate L and R): +24 dB to -24 dB in 0.5 dB steps
Silence detect: Level adjustable, - 15 to -25 dBu in 1 dB steps
Warning timer: 1 to 60s (for silence detection)
Logging
Input x State: OK, WARN Silence (L and R)
RollTrack controls: On/Off, Index, Source, Address, Command, Status, Sending
RollTrack:
- Unused
- Input 1 Present
- Input 1 Silent
- Input 2 Present
- Input 2 Silent
General Specifications
Analog input/output level: Headroom set to: +24 dBu (17.5 Vp-p) gain at unity
Analog input impedance: 10 kΩ (600Ω option)
Analog output impedance: Balanced <50Ω
Total harmonic distortion: + noise: <-94 dBu (0.002%) at 700 Hz, 24 dBu input and 0 dB gain
Gain accuracy: <±0.2 dB @ 0 dB
Gain error (channel 1 to channel 2): <±0.2 dB @ 0 dB
Common mode rejection: <-70 dB (20 Hz to 20 kHz)
Frequency response: ±0.1 dB (20 Hz to 20 kHz with reference to 1 kHz)
Channel 1 to 2 cross talk: <-110 dB at 1 kHz
Headroom (in and out): 24 dBu (Note: a maximum of 3 outputs can be driven at 24 dBu when using 600Ω terminations)
Power Consumption
Module power consumption:
- 6.5W Max (A Frames)
- 4.5 PR (B Frames)
MEDIA GALLERY


ORDERING INFORMATION
IQADA0110-1A
Single/dual-channel analog DA. Balanced D-type audio connections. Configurable for 1 input to 14 outputs or 2 inputs to 7 outputs per input.
For more details on enclosure types please refer to the IQ Modular Enclosures datasheet.