Skip to main content
Login Contact Us

IQCWM16

Fiber Optic Coarse Wave Division Multiplexing Module

The IQCWM16 from Grass Valley is an optical Coarse Wave Division multiplexer/demultiplexer module. Occupying just a single slot of an IQ modular frame, the CWDM optical block itself is a completely passive device and there are no other active components on the fully assembled module. The IQCWM16 is intended for use with the IQOTX80, IQORX80 and IQOTR40 series of Fiber Optical Conversion modules. Connection to all ports are made at the rear of the module using standard LC receptacles. 

SPECIFICATIONS

Signal

Inputs/Outputs

IQCWM16 Optical

  • 1 x Common
  • 1 x 1270 nm
  • 1 x 1290 nm
  • 1 x 1310 nm
  • 1 x 1330 nm
  • 1 x 1350 nm
  • 1 x 1370 nm
  • 1 x 1390 nm
  • 1 x 1410 nm
  • 1 x 1470 nm
  • 1 x 1490 nm
  • 1 x 1510 nm
  • 1 x 1530 nm
  • 1 x 1550 nm
  • 1 x 1570 nm
  • 1 x 1590 nm
  • 1 x 1610 nm



Connector/format:
LC singlemode

Controls

Card Edge Controls: NONE
Card Edge Indicators: NONE

General Specifications

IQCWM16

Connector Type LC

Insertion Loss: < 5 dB

Channel Spacing: 20 nm

Pass band @ 0.5 dB ≥ 14 nm

Isolation: > 3 0 dB

Directivity: > 50 dB

Return Loss: > 4 5 dB

Power Consumption

Module power consumption: No power requirement as passive module design
Note: This module can only be installed in IQH3A, IQH3B, IQH4B, IQH1A or IQH1P enclosures. As the card is fitted from the rear of the enclosure at least 435 mm clearance is required behind the enclosure installation

ORDERING INFORMATION

IQCWM1600-1A
17-port Fiber CWDM module. 17 bidirectional fiber connections (LC/PC), Common plus 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 nm optical wavelengths.

DOCUMENTS & DOWNLOADS

DATASHEETS

IQCWM16: Fiber Optic Coarse Wave Division Multiplexing Module Datasheet

The IQCWM16 from Grass Valley is an optical Coarse Wave Division multiplexer/demultiplexer module

Download
Go back to top