Signal Input

SDI input: 1x

Input cable length:

• Up to 80m Belden 1694A @ 3 Gb/s
• Up to 170m Belden 1694A @ 1.5 Gb/s
• Up to 300m Belden 1694A @ 270 Mb/s

Fiber Signal Input

Inputs: 1x

Optical: 3 Gb/s HD-SDI, 1.485 Gb/s HD-SDI or 270 Mb/s SD-SDI

Connector/format: LC single-mode

Conforms to:

• SMPTE ST 297-2006
• SMPTE ST 424/425 (HD level A/B)
• SMPTE ST 292 (HD)
• SMPTE ST 259-C (SD)

Signal Outputs
SDI outputs: up to 4

Fiber Signal Output
Outputs: Up to 2

Optical: 3 Gb/s HD-SDI, 1.485 Gb/s HD-SDI or 270 Mb/s SD-SDI

Connector/format: LC singlemode

Conforms to:

• SMPTE ST 297-2006
• SMPTE ST 424/425 (HD level A/B)
• SMPTE ST 292 (HD)
• SMPTE ST 259-C (SD)

Power: OK (Green)

CPU: OK (Green flashing)

Input 1: OK (Green), Bypass (Orange), Loss (Red)

SFP A: Selected (Green)

RollCall Functions
Video controls:

• Input 1 format select: SDI, Rx
• Laser disable: On/Off
• Input 1 select: Auto, 3G, HD, SD, DVB-ASI (SMPTE ST 305), Bypass (reclocking off), Output
• Input status: Present, Loss/Unknown, Data Rate

Other Controls
User memories: Name, save and recall 16 user memories

Memory naming: User configurable naming of memories 1 – 16

Information window: Video Input Status

Logging:

• Input 1 Type
• Input 1 Data Rate
• Input 1 Present
• Input 1 Error
• Input 1 Loss

Optical logging:

• Tx Laser Bias High Warning
• Tx Power Low Warning
• Tx Power High Warning
• Note: Optical I/O, control and logging dependent on type of SFP module fitted

Laser wavelength:

• Input 1 Rx Power High Warning
• Input 1 Rx Power Low Warning
• Input 1 Rx Power Measurement

RollTrack index: Up to 16 RollTrack destinations

RollTrack controls: On/Off, Index, Source, Address, Command, Status, Sending

RollTrack sources: Unused, Input Present, Input Loss, Input Rate, Fiber Rx Power OK, Fiber Rx Power Fail, Fiber Tx Bias OK (1&2), Fiber Tx Bias High (1&2), Fiber Tx Bias Low (1&2)

Factory default: Resets all module settings to factory specified default values and clears memories

Default settings: Resets all module settings to factory specified defaults but does not clear memories

Restart: Software restart of the module

Module information: Reports following module information: Software version, Serial number, Build number, KOS version, Firmware version, PCB version

Electrical:

• 3 Gb/s SDI, SMPTE ST 424/425
• 1.5 Gb/s HD-SDI, SMPTE ST 292
• 270 Mb/s SDI, SMPTE ST 259-C / DVB-ASI

Connector/format: BNC/75Ω panel jack on standard Grass Valley connector panel

Signal amplitude: 800 mV ±80 mV

Return loss:

• >-15 dB (270 Mb/s, 1.5 Gb/s)
• >-10 dB (3 Gb/s)

Output jitter:

• SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)
• 3G/HD-SDI 1.0 UI (10 Hz) / 0.2 UI (100 kHz)

Optical 1310 nm Tx
Wavelength: 1310 nm

Spectral width (FWHM): >1.5 nm (typ.)

Output power: 0 to -5 dBm (-2 dBm typ.)

Rise and fall time:

• 135 ps @ 3 Gb/s
• 270 ps @ 1.5 Gb/s
• 1.5 ns @ 270 Mb/s

Latency: <40 ms

Extinction ratio: >7.5:1 (typ.)

Optical return loss: -27 dB

Link distance:

• Up to 30 km @ 270 Mb/s
• Up to 21 km @ 1.5 Gb/s
• Up to 10 km @ 3 Gb/s

Optical CWDM Tx
Wavelength: 1270 - 1430 nm (SFP type dependent)
Spectral width (FWHM: >1 nm (typ.)

Output power: 0 to 4 dBm typical

Rise and fall time:

• 135 ps @ 3 Gb/s
• 270 ps @ 1.5 Gb/s
• 1.5 ns @ 270 Mb/s

Latency: <40 ms

Extinction ratio: >7.5:1 (typ.)

Optical return loss: -27 dB

Optical Rx
Input wavelength range: Min. 1260 nm, Max. 1620 nm

Input sensitivity: -21 dBm

Optical power input range: >-0 dBm, <-20 dBm

Link distance:

• Up to 30 km @ 270 Mb/s
• Up to 21 km @ 1.5 Gb/s
• Up to 10 km @ 3 Gb/s

Optical High Sensitivity Rx
Input wavelength range: Min. 1260 nm, Max. 1620 nm

Input sensitivity: -19 dBm

Optical power input range: >-9 dBm, <-28 dBm

Module power consumption: 4.5 PR Max. (B Frames)