IQFDA31
Dual-channel 3G/HD/SD-SDI Reclocking Distribution Amplifier with Fiber I/O
The IQFDA31 provides dual 3G-SDI, HD-SDI and SD-SDI inputs with both SDI and Fiber optic outputs in a single width package. Flexible routing of inputs to outputs allows the module to operate as single or dual channel mixing fiber and copper I/O. Input signal loss detection enables switching from a main to back-up feed automatically, providing emergency changeover functionality. Its 80m 3G, 170m HD input equalization performance and non re-clocking distribution of wide-band signals make it ideal for all distribution applications.

FEATURES
- Dual-channel intelligent 3G/HD/SD-SDI reclocking distribution amplifier
- Flexible selection of inputs allows single- or dual-channel operation
- Input signal monitoring allows auto-changeover functionality to provide emergency switching
- Will distribute DVB-ASI and other wideband signals
- Equalizes up to 80m at 3 Gb/s, 170m at 1.5 Gb/s and 300m at 270 Mb/s when using Belden 1694A cable
- Standards supported:
- 3G-SDI to SMPTE ST 424/425
- HD-SDI to SMPTE ST 292
- SD-SDI to SMPTE ST 259-C
- DVB-ASI
- SMPTE ST 297-2006
- 1310 nm and CWDM output wavelengths available
- GV Orbit control and monitoring compatible
- Extremely compact — up to 32 channels in 3 RU — for use where space is at a premium
SPECIFICATIONS
Inputs and Outputs
Signal Input
SDI inputs: 2x
Input cable length:
- Up to 80m Belden 1694A @ 3 Gb/s
- Up to 170m Belden 1694A @ 1.5 Gb/s
- Up to 300m Belden 1694A @ 270 Mb/s
Note: When using mixed HD and SD inputs it is recommended that cable lengths do not exceed the HD specification of 140m.
Fiber Signal Input
Inputs: Up to 2
Optical: 3 Gb/s HD-SDI, 1.485 Gb/s HD-SDI or 270 Mb/s SD-SDI
Connector/format: LC singlemode
Conforms to:
- SMPTE ST 297-2006
- SMPTE ST 424/425 (HD level A/B)
- SMPTE ST 292 (HD)
- SMPTE ST 259-C (SD)
Signal Outputs
SDI outputs: Up to 4
Fiber Signal Output
Outputs: Up to 2, selectable per channel
Optical: 3 Gb/s HD-SDI, 1.485 Gb/s HD-SDI or 270 Mb/s SD-SDI
Connector/format: LC singlemode
Conforms to:
- SMPTE ST 297-2006
- SMPTE ST 424/425 (HD level A/B)
- SMPTE ST 292 (HD)
- SMPTE ST 259-C (SD)
Controls
Indicators
Power: OK (Green)
CPU: OK (Green flashing)
Input 1: OK (Green), Bypass (Orange), Loss (Red)
Input 2: OK (Green), Bypass (Orange), Loss (Red)
SFP A: Selected (Green)
SFP B: Selected (Green)
RollCall Functions
Video Controls
Input 1 format select: SDI, Rx
Input 2 format select: SDI, Rx
Output 1 select: Serial 1, Serial 2
Output 2 select: Serial 1, Serial 2
Output 3 select: Serial 1, Serial 2
Output 4 select: Serial 1, Serial 2
Laser disable: On/Off
Input 1 (2) select: Auto, 3G, HD, SD, DVB-ASI, Bypass (reclocking off), Output
Input status: Present, Loss/Unknown, Data Rate
Other Controls
User memories: Name, save and recall 16 user memories
Memory naming: User configurable naming of memories 1 – 16
Information window: Video Input Status
Logging:
- Input 1 (2) Type
- Input 1 (2) Data Rate
- Input 1 (2) Present
- Input 1 (2) Error
- Input 1 (2) Loss
Optical logging*:
- Tx Laser Bias High Warning
- Tx Power Low Warning
- Tx Power High Warning
Laser wavelength:
- Input 1 (2) Rx Power High Warning
- Input 1 (2) Rx Power Low Warning
- Input 1 (2) Rx Power Measurement
RollTrack index: Up to 16 RollTrack destinations
RollTrack controls: On/Off, Index, Source, Address, Command, Status, Sending
RollTrack sources: Unused, Input Present (1&2, Fiber 1 & 2), Input Loss (1&2, Fiber 1 & 2), Output Rate/Std (1&2), Out 1 Selects (In1 & 2 & Rx1 & Rx2), Out 2 Selects (In1 & 2 & Rx1 & Rx2), Fiber Rx Power OK (1&2), Fiber Rx Power Fail (1&2), Fiber Tx Bias OK (1&2), Fiber Tx Bias High (1&2), Fiber Tx Bias Low (1&2)
Factory default: Resets all module settings to factory specified default values and clears memories
Default settings: Resets all module settings to factory specified defaults but does not clear memories
Restart: Software restart of the module
Module information:
- Reports following module information: Software version, Serial number, Build number, KOS version, Firmware version, PCB version
General Specifications
Electrical:
- 3 Gb/s SDI, SMPTE ST 424/425
- 1.5 Gb/s HD-SDI, SMPTE ST 292
- 270 Mb/s SDI, SMPTE ST 259-C / DVB-ASI
Connector/format: BNC/75Ω panel jack on standard Grass Valley connector panel
Return loss:
- >-15 dB (270 Mb/s, 1.5 Gb/s)
- >-10 dB (3 Gb/s)
Output jitter:
- SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)
- 3G/HD-SDI 1.0 UI (10 Hz) / 0.2 UI (100 kHz)
Optical 1310 nm Tx
Wavelength: 1310 nm
Spectral width (FWHM): >1.5 nm (typ)
Output power: 0 to -5 dBm typical (-2 dBm typical)
Rise and fall time:
- 135 ps @ 3 Gb/s
- 270 ps @ 1.5 Gb/s
- 1.5 ns @ 270 Mb/s
Extinction ratio: >7.5:1 (typ.)
Optical return loss: -27 dB
Link distance:
- Up to 30 km @ 270 Mb/s
- Up to 21 km @ 1.5 Gb/s
- Up to 10 km @ 3 Gb/s
Optical Rx
Input wavelength range: Min. 1260 nm, Max. 1620 nm
Input sensitivity: -21 dBm
Optical power input range: > -0 dBm, < -20 dBm
Link distance:
- Up to 30 km @ 270 Mb/s
- Up to 21 km @ 1.5 Gb/s
- Up to 10 km @ 3 Gb/s
Power Consumption
Module power consumption: 4.5 PR Max (B Frames)
* Dependent upon the SFP variant inserted.
MEDIA GALLERY


ORDERING INFORMATION
IQFDA3100-1B3
Dual-channel 3G/HD/SD-SDI reclocking distribution amplifier with fiber I/O. 2 SDI inputs, 2 optical input/outputs, 4 SDI outputs selectable per input.
Fiber SFP Options
FC1-13T1 — with single fiber transmitter (1310 nm)
FC1-13T2 — with dual fiber transmitter (1310 nm)
FC1-R1 — with single fiber receiver
FC1-R2 — with dual fiber receiver
FC1-13TR — with single fiber transceiver (1310 nm)
Note: Fiber SFP type must be ordered in addition to the module.
For more details on enclosure types please refer to the IQ Modular Enclosures datasheet.