Skip to main content
Contact Us

IQMIX10

3G/HD/SD-SDI Multichannel IP Transceiver

The IQMIX10 is Grass Valley’s entry-level video-over-IP transceiver developed for use within low latency and high bandwidth Ethernet IP networks. Using RTP VSF TR-03 (SMPTE ST 2110), TR-04 and SMPTE ST 2022-6 encoding and encapsulation schemes enables the IQMIX10 to encode or decode up to 12 SDI signals (6 in and 6 out) and transport them over redundant 10 GbE links.

IQMIX10 provides frame-synchronized SDI outputs along with both compressed and uncompressed modes of operation. Using SMPTE ST 2042 (VC2) lightweight compression allows for high-quality signal carriage while optimizing bandwidth requirements, and sending signals uncompressed...

FEATURES

  • Handles up to 12 SDI signals over dual 10 GbE IP links (dependent on SDI signal format and compressed or uncompressed transport mode)
  • Supports configuration of Ethernet links for maximum signal transport using both SFPs, or for dual link mode to provide link redundancy as per SMPTE ST 2022-7
  • Multiple transport types available for each SDI input including:
    • Compressed IP transport using SMPTE ST 2042 (VC2) low-latency high-quality encoding profile
    • Uncompressed video transport using either VSF TR-03 (SMPTE ST 2110) and TR-04 RTP, or SMPTE ST 2022-6 encapsulation
    • PCM audio using TR-03 & AES67
    • SMPTE ST 2110-40 metadata support via IETF standard “RTP Payload for Ancillary Data”
  • Supports frame synchronized SDI inputs and outputs referenced to either IEEE-1588v2 (PTP) network timing (compliant with SMPTE ST 2059-2) or via the IQH3B or IQH4B frame’s analog reference bus for Black Burst / tri-level syncs
  • Includes 4K UHD quad link mode for 3G SQD or 2SI signal transport
  • Low delay mode and independent H & V offset available for each channel, along with up to 2 frames of video delay, and up to 255 ms of audio delay
  • Supports uni-cast as well as IGMPv3 source-specific multicast, allowing point to point operation or transmission in multicast groups
  • Standards supported:
    • 3G-SDI to SMPTE ST 424/SMPTE ST 425 level A compatible
    • HD-SDI to SMPTE ST 292/SMPTE ST 274/SMPTE ST 296
    • SD-SDI to SMPTE ST 259-C
    • 10G Ethernet to IEEE 802.3
  • RollCall control and monitoring compatible with standard logging and reporting features

SPECIFICATIONS

Inputs and Outputs

Signal Inputs/Outputs

SDI: 12 x bi-directional, see configuration table

Electrical:

  • 3 Gb/s SDI, SMPTE ST 424
  • 1.5 Gb/s HD-SDI, SMPTE ST 292
  • 270 Mb/s SDI, SMPTE ST 259-C

Connector/format: BNC/75Ω panel jack on standard connector panel

Input cable length: TBC

Ethernet Signal

SFP+ Optical: 2 x 10G Ethernet: Conforms to IEEE 802.3ae - 10 Gigabit Ethernet over fiber

SFP+ connected cable: 2 x 10G Ethernet

Conforms to IEEE 802.3ak - 10 Gigabit Ethernet over twinaxial cables

Note: SFP type must be ordered in addition to the module.

Controls

Indicators

Power: OK (Green)

CPU: OK (Flashing)

Content Status

Summary:

  • OK (Green)
  • Warning (Yellow)
  • Error (Red)

Functions

Electrical

Standards supported

Module Power Consumption

  • 26.5 W Max (A Frames)
  • 26.5 PR Max (B Frames)

SDI to IP Configurations
IQMIX10 — 10 GbE Config 1 Config 2 Config 3 Config 4 Config 5 Config 6
SDI In <> Out 6 <> 6 5 <> 5 5 <> 5 4 > 0 4 > 0 0 > 4
Codec Support SMPTE ST 2022-6 TR-04 TR-03 (2110) TR-03 (2110)
Frame Sync I/Ps
VC2 VC2

ORDERING INFORMATION

IQH Enclosures

IQMIX1000-2B3 3G/HD/SD-SDI Multi-channel IP Transceiver. 12 SDI I/O, 2 10 GbE I/O on SFP+ connectors.

For more details on enclosure types please refer to datasheet IQH3B.

SFP Options

FCS-10GE-SR

10GBASE-SR short range SFP for MMF

FCS-10GE-LR

10GBASE-LR long range SFP for SMF

FCS-10GE-ER

10GBASE-ER extended range SFP for SMF

Note: Fiber SFP type must be ordered in addition to the module.

DOCUMENTS & DOWNLOADS

DATASHEETS

IQMIX10

The IQMIX10 from Grass Valley is an entry-level video-over-IP transceiver developed for use within low latency and high bandwidth Ethernet IP networks. Using RTP VSF TR-03 (SMPTE ST 2110), TR-04 and SMPTE ST 2022-6 encoding and encapsulation schemes enables the IQMIX10 to encode or decode up to 12 SDI signals (6 in and 6 out) and transport them over redundant 10 GbE links.

Download

SOFTWARE DOWNLOADS

Login Required

If you have a valid Service & Support Agreement please visit the link below to access the support portal to locate your product download.

Go to Product Downloads

DOCUMENTATION LIBRARY

Further documents

Already know what you're looking for? Click the link below to access our full documentation library

Visit Library
Go back to top