IQDMX30
3G/HD/SD-SDI De-embedder for 8 AES/EBU Audio Streams
The IQDMX30 provides 16-channel digital audio de-embedding for 3G-SDI, HD-SDI or SD-SDI signals. Audio processing features include gain, invert and channel level routing, while a video proc. amp is also included in the feature set.

FEATURES
- 16-channel 3G/HD/SD-SDI de-embedder with 8 balanced or unbalanced AES outputs
- Handles up to 16 channels of embedded audio present on the incoming SDI stream
- Standards supported:
- 3G-SDI to SMPTE ST 424/425 level A & B compatible
- HD-SDI to SMPTE ST 292/274/296
- SD-SDI to SMPTE ST 259-C
- Channel level (sub-frame) routing
- Audio proc amp features including independent gain, invert, mute controls and adjustable delay for selected audio channels
- Any group of embedded audio may be passed unchanged, processed or blanked
- Embedded Dolby E support — pair routing, delay and Dolby E header alignment
- Handles Dolby E and PCM audio present in the same group with detection and reporting
- Able to pass all ancillary data without corruption incl. VANC metadata
- Independent HANC and VANC blanking control
- LTC timecode insertion and embedded timecode handling support, including ability to output via the caption mechanism for monitoring purposes
- Input loss detection — default output of black/pattern/freeze
- Up to 9 frames of video delay and 2 seconds of audio delay
- Video controls including video gain and offset
- Built-in test pattern generator and audio tone generator
- 16x user memories, save/recall/rename
- GV Orbit control and monitoring compatible
SPECIFICATIONS
Inputs and Outputs
Signal Inputs
SDI inputs: 2x
Input 1 cable length:
- Up to 70m Belden 1694A @ 3 Gb/s
- Up to 160m Belden 1694A @ 1.5 Gb/s
- >350m Belden 1694A @ 270 Mb/s
Input 2 cable length:
- Up to 60m Belden 1694A @ 3 Gb/s
- Up to 100m Belden 1694A @ 1.5 Gb/s
- Up to 100m Belden 1694A @ 270 Mb/s
Signal Outputs
SDI outputs: 2x (4)
Unbalanced digital audio: 8x AES/EBU, AC3, Dolby E (BNC)
Balanced digital audio: 8 x AES/EBU, AC3, Dolby E (25-way D-type)
Controls
Indicators
Power: OK (Green)
CPU running: OK (Green flashing)
FPGA running: OK (Green flashing)
Status:
- OK (Green)
- Warning (Yellow)
- Error (Red)
Input 1: OK (Green)
Input 2: OK (Green)
Video Controls
Input standards:
- 1125/1080p50 (A & B)
- 1125/1080p59.94 (A & B)
- 1125/1080i29.97, 1125/1080i25
- 750/720p59.94, 750/720p50
- 525/480i29.97, 625/576i25
Default video output Type: Pattern, Freeze, Black
Default video output standard:
- Last Known Good
- 1125/1080p50 (A & B)
- 1125/1080p59.94 (A & B)
- 1125/1080i29.97, 1125/1080i25
- 750/720p59.94, 750/720p50
- 525/480i29.97, 625/576i25
Input select: Input 1, Input 2
Manual freeze: On/Off
Freeze: Field/Frame
Video delay frames: 0 – 9 F
VANC data: Blank VANC
SD VANC data: Line blanking (6 controls)
Proc. amp enable: On/Off
Black level: ±100 mV in steps of 0.8 mV
Hue adjust: ±180° in steps of 1°
Master video gain: ±6 dB in steps of 0.1 dB
Y-Gain: ±6 dB in steps of 0.1 dB
Cb/Cr gain: ±6 dB in steps of 0.1 dB
Y/C timing:
- ±8 pixels in 2 pixel steps (SD)
- ±16 pixels in 2 pixel steps (HD/3G)
Picture position:
- ±8 pixels in 2 pixel steps (SD)
- ±16 pixels in 2 pixel steps (HD/3G)
Pattern on: On/Off
Pattern select: 75% Color Bars, Black
Caption on: On/Off
Edit caption: 19 characters available
Audio Controls
Embedder Assignment
Group 1 to 4 enable: On/Off
Pair 1 to 8 source L / non-PCM: Dis-embed 1_1 to 8_2, Tone, Silence
Pair 1 to 8 source R: Dis-embed 1_1 to 8_2, Tone, Silence
Pair 1 to 8 stereo: Link channel pairs
Pair 1 to 8 polarity L/R: On/Off
Pair 1 to 8 gain L/R: +12 dB to -72 dB in 0.1 dB steps
Pair 1 to 8 non-PCM: On/Off
AES Assignment
AES 1 to 8 source L / non-PCM: Dis-embed 1_1 to 8_2, Tone, Silence
AES 1 to 8 source R: Dis-embed 1_1 to 8_2, Tone, Silence
AES 1 to 8 stereo: Link channel pairs
AES 1 to 8 polarity L/R: On/Off
AES 1 to 8 gain L/R: +12 dB to -72 dB in 0.1 dB steps
AES 1 to 8 non-PCM: On/Off
Processed audio delay control
Course manual delay: Up to 1.75s in 5 ms steps
Fine manual delay: ±0.25s in 0.5 ms steps
Dolby-E
Auto alignment: On/Off
Tone
Frequency L/R: 100 Hz to 10k Hz in 100 Hz steps
Channel ident: On/Off
HANC data: Blank HANC (Removes all HANC data. Note audio removed when embedders disabled)
Audio Monitoring
Silence detect: 0 to -80 dB in steps of 1 dB
Signal overload: Detect 0 to -80 dB in steps of 1 dB
Warning timer: 1 to 20 seconds in steps of 1 second
Other Controls
User memories: 16x Save, Recall, Rename
Memory naming: User configurable naming of memories 1 – 16
RollTrack Sources: Unused, Video Delay, Input Present, Input 1 Select, Input 2 Select,
Input Loss, Output 525, Output 625, Output 720p, Output 1080i, Output 1080p, Output
Freeze, Output Unfreeze, Output Pattern on, Output pattern off, Output Caption on, Output Caption off, Disemb (Pairs 1-8) PCM, Disemb (Pairs 1-8) Data, Disemb (Pairs 1-8) Dolby E, Disemb (Pairs 1-8) V bit, Disemb (Pairs 1-8) Loss
Information window: Video Input Status, Audio Input Status
Factory default: Resets all module settings to factory specified default values and clears memories
Default settings: Resets all module settings to factory specified defaults but does not clear memories
Restart: Software restart of the module
Module information:
- Reports following module information: Software version, Serial number, Build number, KOS version, Firmware version, PCB version
General Specifications
Electrical:
- 3 Gb/s SDI, SMPTE ST 424
- 1.5 Gb/s HD-SDI, SMPTE ST 292
- 270 Mb/s SDI, SMPTE ST 259-C/DVB-ASI
Connector/format: BNC/75Ω panel jack on standard IQ connector panel
Return loss:
- >-15 dB (270 Mb/s, 1.5 Gb/s)
- >-10 dB (3 Gb/s)
Output jitter:
- SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)
- 3G/HD-SDI 1.0 UI (10 Hz) / 0.2 UI (100 kHz)
Video standards:
- 1125/1080p50 (A & B), 1125/1080p59.94 (A & B)
- 750/720p50, 750/720p59.94
- 1125/1080i25, 1125/1080i29.97
- 625/576i25, 525/480i29.97
Typical video delay:
- SD: 70 µs
- HD: 38 µs
- 3G-A: 19 µs
- 3G-B: 40 µs
Embedded audio handling:
- HD – 24-bit synchronous 48 kHz to SMPTE ST 299
- SD – 20-bit synchronous 48 kHz to SMPTE ST 272-A
Embedded audio delay:
- Minimum (PCM) 2 ms
- Maximum (non-PCM)
- SD: 67 µs
- HD: 28 µs
- 3G-A: 15 µs
- 3G-B: 25 µs
Digital Audio Output (Balanced)
Connector/format: 25-way D-type
Level: 3 Vp-p typical into 110Ω
Standard: AES3, SMPTE ST 272-A-1994, SMPTE ST 299
Digital Audio Output (Unbalanced)
Connector/format: BNC
Level: 1 Vp-p typical into 75Ω
Standard: AES3id, SMPTE ST 272-A-1994, SMPTE ST 299
LTC Input Format
According to SMPTE ST 12 2008c
Frame rate: 23.98, 24, 25, 29,97, 30, 50, 59.94 and 60 fps
Level: 0.4V to 5V p-p for unbalanced and 0.2V to 5 Vp-p for balanced
LTC Port Unbalanced
Input connector type: BNC
Input impedance: 75Ω
Input signal range: 0.4 Vp-p to 5 Vp-p
LTC Port Balanced
Input connector type: Differential via 2 pins of 25-pin D-sub female AES AUDIO/LTC IN (and GND pin)
Input impedance: 10 kΩ
Input signal range: 0.2 Vp-p to 5 Vp-p
Power Consumption
Module power consumption: 8.5 PR (B Frames)
MEDIA GALLERY

ORDERING INFORMATION
IQDMX3048-2B3
3G/HD/SD-SDI 16-channel AES De-embedder 4 SDI outputs, 8 unbalanced AES outputs, 1 unbalanced LTC input
IQDMX3049-1B3
3G/HD/SD-SDI 16-channel AES De-embedder
2 SDI outputs, 8 balanced AES outputs,1 balanced LTC input
For more details on enclosure types please refer to the IQ Modular Enclosures datasheet.