Signal Inputs
SDI inputs: 1 per channel

Input 1 cable length:

• Up to 70m Belden 1694A @ 3 Gb/s
• Up to 160m Belden 1694A @ 1.5 Gb/s
• >350m Belden 1694A @ 270 Mb/s

Input 2 cable length:

• Up to 60m Belden 1694A @ 3 Gb/s
• Up to 100m Belden 1694A @ 1.5 Gb/s
• Up to 200m Belden 1694A @ 270 Mb/s

Analog reference:

• 1x analog reference with passive loop-through
• Black (HD tri-level and SD bi-level) and blackburst (SD bi-level)
• SD bi-level – RS170A
• HD tri-level – SMPTE ST 240, 274 and 296

Signal Outputs

SDI outputs: 2x per channel

Indicators
Power: OK (Green)

CPU running: OK (Green flashing)

FPGA running: OK (Green flashing)

Status:

• OK (Green)
• Warning (Yellow)
• Error (Red)

Input 1: OK (Green)

Input 2: OK (Green)

Reference lock: OK or Cross-locking (Green), Std error (Green flashing)

Genlock & Video Delay
Genlock mode: Free-run, Lock to Reference, Lock to input

Genlock H-Phase: ± 0.5H in pixel clock steps

Genlock V-Phase: ± 0.5F in 1 line steps

Video H-Delay: 0 – 1 Line in pixel clock steps

Video V-Delay: 0 – 1 Frame in 1 line steps

Video Delay Frames: 0 - 3 F

Video Controls (per Channel)
Input Standard: 1125(1080)/50P (A & B), 1125(1080)/59P (A & B), 1125(1080)/29i, 1125(1080)/25i, 750(720)/59P, 750(720)/50P, 525(480)/29i,625(576)/25i

Default Video Output
Type: Pattern, Freeze, Black

Standard: Last Known Good, 1125(1080)/50P (A & B), 1125(1080)/59P (A & B), 1125(1080)/29i, 1125(1080)/25i, 750(720)/59P, 750(720)/50P, 525(480)/29i, 625(576)/25i

Manual Freeze: On/Off

Freeze: Field/Frame

VANC data: Blank VANC

SD VANC data: Line blanking (23/336 in 625, 21,22, 283, 284 in 525)

HANC data: Blank HANC (Removes all HANC data, including audio)

Proc amp enable: On/Off

Black Level: ±100 mV in steps of 0.8 mV

Hue Adjust: ±180° in steps of 1°

Master video gain: ±6 dB in steps of 0.1 dB

Y-Gain: ±6 dB in steps of 0.1 dB

Cb/Cr Gain: ±6 dB in steps of 0.1 dB

Y/C Timing:

• ±8 pixels in 2 pixel steps (SD)
• ±16 pixels in 2 pixel steps (HD/3G)

Picture Position:

• ±8 pixels in 2 pixel steps (SD)
• ±16 pixels in 2 pixel steps (HD/3G)

Pattern On: On/Off

Pattern select: 75% Color Bars, Black

Caption On: On/Off

Edit caption: 19 characters available

Audio Controls (per Channel)
Embedder assignment

Group 1 to 4 enable: On/Off

Pair 1 to 8 source L/non-PCM: Dis-embed 1_1 to 8_2, Tone, Silence

Pair 1 to 8 source R: Dis-embed 1_1 to 8_2, Tone, Silence

Pair 1 to 8 stereo: Link channel pairs

Pair 1 to 8 polarity L/R: On/Off

Pair 1 to 8 gain L/R: +12 dB to -72 dB in 0.1 dB steps

Pair 1 to 8 non-PCM: On/Off

Processed Audio Delay Control
Coarse manual delay: Up to 1.75s in 5 ms steps

Fine manual delay: ±0.25s in 0.5 ms steps

Variable audio delay control source: Internal, Manual, RollTrack (14 to 17)

Dolby-E
Dolby-E auto alignment: On/Off

Tone
Frequency L/R: 100 Hz to 10 kHz in 100 Hz steps

Channel ident: On/Off

HANC data: Blank HANC (Removes all HANC data. Note audio removed when embedders disabled)

Audio Monitoring
Silence detect: 0 to -80dB in steps of 1dB

Signal overload detect: 0 to -80 dB in steps of 1 dB

Warning timer: 1 to 20 seconds in steps of 1 second

Other Controls
User memories: 16x Save, Recall, Rename

Memory naming: User configurable naming of memories 1 – 16

RollTrack sources: Unused, Video Delay (1&2), Audio Delay (1&2), Input Present (1&2), Input Loss (1&2), Input Select (1&2), Output Rate/Std (1&2), Output Freeze (1&2), Output Unfreeze(1&2), Output Pattern On (1&2), Output Pattern Off (1&2), Output Black On (1&2), Output Black Off (1&2), Output Caption On (1&2), Output Caption Off (1&2), Inp1 Embedded Audio (Pairs 1-8) PCM, Inp1 Embedded Audio (Pairs 1-8) Non-PCM, Inp1 Embedded Audio (Pairs 1-8) Loss, Inp1 Embedded Audio (Pairs 1-8) V Bit,

Electrical:

• 3 Gb/s SDI, SMPTE ST 424
• 1.5 Gb/s HD-SDI, SMPTE ST 292
• 270 Mb/s SDI, SMPTE ST 259-C/DVB-ASI

Connector/format: BNC/75Ω panel jack on standard IQ connector panel

Return loss:

• > -15 dB (270 Mb/s, 1.5 Gb/s)
• > -10 dB (3 Gb/s)

Output jitter:

• SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)
• 3G/HD-SDI 1.0 UI (10 Hz) / 0.2 UI (100 kHz)

Reference source: External – HD tri-level/SD bi-level/input video syncs

Electrical:

• Black (HD tri-level and SD bi-level) and blackburst (SD bi-level)
• SD bi-level – RS170A
• HD tri-level – SMPTE ST 240, 274 and 296

Connector/format: BNC/75Ω panel jack on standard IQ connector panel

Analog reference return loss:

• SD bi-level > 40 dB to 5.5 MHz
• HD tri-level > 35 dB to 30 MHz

Video standards:

• 1125(1080)/50p (A & B), 1125(1080)/59p (A & B)
• 750(720)/50p, 750(720)/59p
• 1125(1080)/25i, 1125(1080)/29i
• 625(576)/25i, 525(480)/29i

Minimum delay (reference lock or free run):

• SD: 67 µs
• HD: 28 µs
• 3G-A: 15 µs
• 3G-B: 25 µs

Typical delay (input lock):

• SD: 70 µs
• HD: 38 µs
• 3G-A: 19 µs
• 3G-B: 40 µs

Synchronizer hysteresis window: 5 μs

Embedded audio handling:

• HD – 24-bit synchronous 48 kHz to SMPTE ST 299
• SD – 20-bit synchronous 48 kHz to SMPTE ST 272-A

Embedded audio delay:

• Minimum (PCM): 2 ms
• Maximum (non-PCM):
  • SD: 67 µs
  • HD: 28 µs
  • 3G-A: 15 µs
  • 3G-B: 25 µs

Power Consumption
Module power consumption:

• 11W Max. (A Frames)
• 10.5 PR (B Frames)