IQVDA00-01
Analog Video Distribution Amplifier with Remote Control
The IQVDA00/01 provides up to 14 equalized analog video outputs. Features include: adjustable gain and equalization, full remote control and status reporting. Sync and burst level warnings provided are for low-level signals. Its 35 MHz bandwidth allows it to be used with HD component signals.

FEATURES
- Up to 14 high-quality outputs
- Balanced loop-through input
- Terminating input option on single width rear panel allows extra output
- 35 MHz bandwidth
- Adjustable gain and equalization
- Equalization for RG59U/Belden 8263 or PSF1/2/Belden 8281 (link selectable)
- GV Orbit control and monitoring compatible with standard logging and reporting features
- Sync and burst level warnings
- Automatic gain control (AGC) with respect to sync height
- Automatic equalization (ACC) with respect to burst height
SPECIFICATIONS
Inputs and Outputs
Signal Input
Video: 1 balanced loop-through (terminating input option for single width rear panel)
Signal Outputs
Video: Up to 14 unbalanced outputs
Controls
Remote Controls:
- Gain: ±4 dB in steps of 0.05 dB
Typical Equalizer Performance
Belden 1694A:
- 0-300m +0.1 dB to 10 MHz
- 0-300m +0.2 dB to 30 MHz
Belden 8281 (PSF1/2):
- 0-300m +0.1 dB to 10 MHz
- 0-300m +0.1 dB; -0.4 dB to 30 MHz
Belden 1855A:
- 0-200m +0.1 dB to 10 MHz
- 200-300m +0.1 dB; -1.5 dB to 10 MHz
RG59B/U:
- 0-100m +0.1 dB to 15 MHz
- 100-300m +0.1 dB; -1.5 dB to 15 MHz
NK 0.6/2.8:
- 0-150m +0.1 dB to 15 MHz
- 0-150m +0.1 dB; -0.5 dB to 30 MHz
AGC: [On/Off] – All recognized SD sources
ACC: [On/Off] – Composite sources only
Signal identification: Line standard – PAL, NTSC, 625 MONO, 525 MONO, 1080p24, 1080i50, 1080i60, 720p50, 720p60, 720p25, 720p30, UNKNOWN
Selectable clamp: Off, On (back porch) and sync tip
Signal level: Sync and burst amplitude ±10%
Logging signal: Level warning, line standard, burst level warning
Indicators
Power: OK
CPU: OK
Status: OK (Green), Warning (Yellow), Error (Red)
General Specifications
Frequency response (without equalization):
- 10 kHz – 10 MHz ± 0.1 dB
- 10 MHz – 30 MHz ± 0.2 dB
- 35 MHz <-1 dB
Differential gain: Unity gain, better than 0.2%
Differential phase: Unity gain, better than 0.2°
Signal/noise ratio: 10 kHz – 7 MHz, better than -66 dB (unweighted)
Linearity: Better than 0.1%
Line tilt : Better than 0.1%
Output D.C.: <90 mV
Output return loss: Better than 40 dB to 5.5 MHz, 35 dB to 30 MHz
Maximum output level: 2.4 Vp-p @ 30 MHz into 75Ω
Insertion delay: 20 ns
Y C gain/ delay inequality: <1%, < 1 ns
K2T, KPB: Better than 0.1%
Max. input level: +6 dB
CMRR: Better than 60 dB at 50 Hz, 40 dB 50 Hz to 8 MHz
Input return loss (powered): Better than 40 dB to 5.5 MHz, 35 dB to 30 MHz
Input return loss (unpowered): Better than 33 dB to 30 MHz
Input impedance: >22 kΩ
Headroom: +6 dB
Output impedance: 75Ω ±1%
Gain: Unity ±1% as supplied
Clamp rejection: 8 dB typical at 50 Hz
Power Consumption
Module power consumption:
- 3W Max (A Frames)
- 2 PR (B Frames)
Mechanical
Complies with Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive (2002/95/EC).
EMC Performance Information:
- Environment: Commercial and light industrial E2
- Peak mains inrush current following a 5 second mains interruption: No mains input
- Performance information: Immunity to conducted common-mode RF interference (EN 55103 2 immunity phenomenon I6): Interference is just visible on critical picture material when a video input or output is subjected to modulated RF at a level of 3V
MEDIA GALLERY


ORDERING INFORMATION
IQVDA0001-1A
Analog video DA with Remote Control. Loop-through input, 6 outputs.
IQVDA0101-1A
Analog video DA with Remote Control. Terminating input, 7 outputs.
IQVDA0006-2A
Analog video DA with Remote Control. Terminating input, 7 outputs.
For more details on enclosure types please refer to the IQ Modular Enclosures datasheet.