IQSDA10
Reclocking SD-SDI Distribution Amplifier
The IQSDA10 provides up to seven reclocked noninverting outputs suitable for 270 Mb/s serial 4:2:2 or DVB-ASI signals.

FEATURES
- Performs equalization and re-clocking of serial 4:2:2 and DVB-ASI signals
- Provides up to seven buffered outputs for SDI signals and DVB-ASI signals
- Input equalizer and reclocking allows for use as a line receiver/distribution amplifier
- Input signal loss indicator
- GV Orbit control and monitoring compatible
SPECIFICATIONS
Inputs and Outputs
Signal Inputs
Standards: SMPTE ST 259-C-1997, DVB-ASI
Connector/format BNC/75Ω panel jack on standard GV connector panel
Signal Outputs
Serial digital: 7 SDI/DVB-ASI
Standards: SMPTE ST 259-C-1997, DVB-ASI
Connector/format: BNC/75Ω panel jack on standard GV connector panel
Card Edge and Remote Controls
Remote Control Functions
Input status: Present, Loss
Logging: Input status
RollTrack controls: On/Off, Index, Source, Address, Command, Status, Sending
RollTrack outputs (1-16):
- Unused
- Input OK
- Input Lost
Indicators
Status OK (Green), Warning (Yellow), Error (Red)
General Specifications
Input return loss: Better than 15 dB to 270 MHz
Maximum input cable length: 220m
Output return loss: Better than 15 dB to 270 MHz
Insertion delay: 20 ns nominal
SDI output level: 800 mV nominal
Power Consumption
Module power consumption:
- 3.5 W (A Frames)
- 3 PR (B Frames)
MEDIA GALLERY


ORDERING INFORMATION
IQSDA1001-1A
Reclocking SDI/DVB-ASI DA with remote control and monitoring. 1 SDI/DVB-ASI input, 7 SDI/DVB-ASI outputs.
For more details on enclosure types please refer to the IQ Modular Enclosures datasheet.