The IQASI82 monitors two ASI streams simultaneously for errors automatically switching from main and backup inputs depending on error criteria. Alarm management flexibility is provided by user defined criticality of alarms from TS Loss to PID monitoring and basic ETSI TR101290 alarms.
External GPI I/O, RS-232 and relay ports can also control functionality, allowing upstream triggering and or automated control via a third-party system.
IQASI82 can be used in conjunction with RollCall Network management system for advanced alarm monitoring and control.
Simultaneously monitors two MPEG-2 DVB ASI Transport Streams (TS)
Compliant with ETSI TR101290 specification and ATSC TS streams packet, burst and byte modes
Multiple switching methods, including near-seamless (between co-timed Identical streams) and non-seamless switching, manual or automatic
Transport stream monitoring and user selectable alarms, including:
Catastrophic failures such as no TS, loss of synchronization or low signal level
User-defined maximum and minimum data rates for each Transport Stream
Monitoring PIDs from a customer specified list up to a maximum of 64 (32 per input)
Alarm monitoring and logging via RollCall interface or SNMP
Relay Bypass for signal path protection
RollCall control and monitoring compatible
Inputs and Outputs Signal Inputs
ASI 1: ASI (270 Mb/s)
ASI 2: ASI (270 Mb/s)
Standards: DVB-ASI, EN50083-9
Electrical: Transformer coupled 75R 800 mVp-p Signal Outputs
Serial data: 4 ASI (270 Mb/s) Control Interface
Electrical: Opto-isolated with an internal 5V pull-up through 470R, active low 8 mA
Connector/Format: Standard Grass Valley screw terminal
Electrical: Darlington driver with 0V common, max sink current 500 mA switching up to 50V
Connector/format: Standard Grass Valley screw terminal
Indicators Power: OK (Green) CPU: OK (Green flashing) Input Status:
Remote: Green Lit = selected Local: Red Lit = selected Output source: Yellow Lit = selected
RollCall Features Status: Input and Output alarm statuses Primary Config: ASI switch configuration PID List: PID management Alarm Outputs: Enable / disable User memories: None Logging: Input Status
DOWNLOAD the software updates, drivers, plug-ins, and utilities for which you are eligible
To change your cookie settings or find out more, click here.
If you continue browsing our website or close this banner, you accept these cookies.