The IQH1A enclosure offers high-density delivery of HD and SD modular solutions. The 1 RU enclosure accepts up to four “A” & Now “B” style modules and is available with hot-swappable dual redundant PSUs for maximum reliability. The enclosure is fitted with RollCall control and monitoring as standard, including full SNMP control and monitoring functionality over Ethernet.
Four single-width or two double-width modules (or any combination)
Capable of accepting all types of IQ modules including HD-SDI, SD-SDI, AES and analog audio, analog video and fiber optics
Dual redundant power supplies (hot swappable) for high system availability
Optimum use of rack space — frames do not require any additional ventilation spacing
Plug-in RollCall enabled via gateway card with TCP/IP, RollNet, SNMP and RS-232/422 connectivity
In service replaceable cooling fans
Chassis monitoring, including inlet temperature, fan condition and module status
Full CE and UL compliance
Inputs, Outputs and Controls Inputs/Outputs
RollCall remote control: BNC connector
Remote control: 9-pin D-Type connector
RollCall/SNMP over TCP/IP
Unit address code set switches: 2 Hex switches 0 to F
Communications mode switch: Select RS-232, RS-485 or RS-422 interface
Additional Controls via RollCall Remote Control System
Full Control via RollCall Control Panel PC Application
Number of modules that may be accommodated: 1 RU: 2 double-width or 4 single-width (or combinations of both) fitted horizontally
Module card dimensions: 100 mm wide, 340 mm long Module rear connector:
Peak mains inrush current following a 5 second mains interruption: 16A
Power (each PSU)
Input voltage range: 100 – 240V 50/60 Hz
Input connector: IEC320 Fused T3.15AH
Input current: 2.5A
Enclosure power consumption: 86.25W maximum (±7.5V supplies)
+7.5V and -7.5V ±10%
Fan supply 11V ±1V
Note that all modules have built-in power supply fuses.
Mechanical Temperature range: 0 to 40° C (32 to 104° F) operating, -30 to +75° C (-22 to 167° F) storage. Cooling fan is fitted Humidity range: 10 to 85% (non condensing) Case type: 1 RU rack mounting aluminum case Dimensions: 483 x 470 x 44.4 mm (19.0 x 18.5 x 1.7 in.) (WxDxH) Depth behind rack ears excluding space for leads: 450 mm (17.7 in.) Weight empty: 6.45 kg (14.2 lbs.) Weight including modules: 8.25 kg (18.2 lbs.)
Single PSU as cold spare or upgrade to Dual PSU configuration.
Ethernet/SNMP compatible RollCall Gateway card for IQH1A enclosures.
Note: Although IQ modules are interchangeable between enclosures, their rear panels are enclosure specific. Code ‘A or B’ order codes may be used when installing modules in the IQH3B and current build IQH1A enclosure. IQH3A and older generation IQH1A enclosures only support Code ‘A’ type rears.
IQ Modular Enclosures: Flexible and Reliable Video and Audio Backbone Datasheet
IQH4B enclosures offer industry-leading, high-density delivery of modular solutions, primarily for use with IP modules. With up to 700W of module power available this 4 RU enclosure accepts up to 20 modules, has dual redundant PSUs and in-service replaceable cooling fans.
IQH3B enclosures offer industry-leading, high-density delivery of modular solutions. The 3 RU enclosure accepts up to 16 modules, and has dual redundant PSUs and cooling fans.
The IQH1A enclosure offers high-density delivery of HD and SD modular solutions. The 1 RU enclosure accepts up to four "A" & now "B" single-width style SDI modules, two double-width style SDI modules or one double-width IP style module.
DOWNLOAD the software updates, drivers, plug-ins, and utilities for which you are eligible
To change your cookie settings or find out more, click here.
If you continue browsing our website or close this banner, you accept these cookies.