The IQMIX10 is Grass Valley’s entry-level video-over-IP transceiver developed for use within low latency and high bandwidth Ethernet IP networks. Using RTP VSF TR-03 (SMPTE ST 2110), TR-04 and SMPTE ST 2022-6 encoding and encapsulation schemes enables the IQMIX10 to encode or decode up to 12 SDI signals (6 in and 6 out) and transport them over redundant 10 GbE links.
IQMIX10 provides frame-synchronized SDI outputs along with both compressed and uncompressed modes of operation. Using SMPTE ST 2042 (VC2) lightweight compression allows for high-quality signal carriage while optimizing bandwidth requirements, and sending signals uncompressed provides the best quality transport, although at the expense of bandwidth. Encapsulation of signals in an SMPTE ST 2022-6 transport stream provides compatibility with other video-over-IP solutions.
IQMIX10 fully integrates with remote control and monitoring systems to provide easy setup and real-time information on signal presence and status for each channel. It’s also fully compatible with Grass Valley’s new broadcast-centric IP routing and network management solution designed to migrate broadcasters from a traditional baseband routing and control environment to new hybrid SDI and IP workflows.
Handles up to 12 SDI signals over dual 10 GbE IP links (dependent on SDI signal format and compressed or uncompressed transport mode)
Supports configuration of Ethernet links for maximum signal transport using both SFPs, or for dual link mode to provide link redundancy as per SMPTE ST 2022-7
Multiple transport types available for each SDI input including:
Compressed IP transport using SMPTE ST 2042 (VC2) low-latency high-quality encoding profile
Uncompressed video transport using either VSF TR-03 (SMPTE ST 2110) and TR-04 RTP, or SMPTE ST 2022-6 encapsulation
PCM audio using TR-03 & AES67
SMPTE ST 2110-40 metadata support via IETF standard “RTP Payload for Ancillary Data”
Supports frame synchronized SDI inputs and outputs referenced to either IEEE-1588v2 (PTP) network timing (compliant with SMPTE ST 2059-2) or via the IQH3B or IQH4B frame’s analog reference bus for Black Burst / tri-level syncs
Includes 4K UHD quad link mode for 3G SQD or 2SI signal transport
Low delay mode and independent H & V offset available for each channel, along with up to 2 frames of video delay, and up to 255 ms of audio delay
Supports uni-cast as well as IGMPv3 source-specific multicast, allowing point to point operation or transmission in multicast groups
3G-SDI to SMPTE ST 424/SMPTE ST 425 level A compatible
HD-SDI to SMPTE ST 292/SMPTE ST 274/SMPTE ST 296
SD-SDI to SMPTE ST 259-C
10G Ethernet to IEEE 802.3
RollCall control and monitoring compatible with standard logging and reporting features
Inputs and Outputs Signal Inputs/Outputs
SDI: 12 x bi-directional, see configuration table
3 Gb/s SDI, SMPTE ST 424
1.5 Gb/s HD-SDI, SMPTE ST 292
270 Mb/s SDI, SMPTE ST 259-C
Connector/format: BNC/75Ω panel jack on standard connector panel
Input cable length: TBC
SFP+ Optical: 2 x 10G Ethernet: Conforms to IEEE 802.3ae - 10 Gigabit Ethernet over fiber
SFP+ connected cable: 2 x 10G Ethernet
Conforms to IEEE 802.3ak - 10 Gigabit Ethernet over twinaxial cables
Note: SFP type must be ordered in addition to the module.
Power: OK (Green)
CPU: OK (Flashing)
Standards supported Module Power Consumption
IQMIX1000-2B3 3G/HD/SD-SDI Multi-channel IP Transceiver. 12 SDI I/O, 2 10 GbE I/O on SFP+ connectors.
For more details on enclosure types please refer to datasheet IQH3B.
SFP Options FCS-10GE-SR
10GBASE-SR short range SFP for MMF
FCS-10GE-LR 10GBASE-LR long range SFP for SMF
10GBASE-ER extended range SFP for SMF
Note: Fiber SFP type must be ordered in addition to the module.
IQMIX10: 3G/HD/SD-SDI Multichannel IP Transceiver Datasheet
The IQMIX10 from Grass Valley, a Belden Brand, is an entry-level video-over-IP transceiver developed for use within low latency and high bandwidth Ethernet IP networks. Using RTP VSF TR-03 (SMPTE ST 2110), TR-04 and SMPTE ST 2022-6 encoding and encapsulation schemes enables the IQMIX10 to encode or decode up to 12 SDI signals (6 in and 6 out) and transport them over redundant 10 GbE links.
Posted Feb 28 2019 (GVB-1-0771A-EN-DS) File Size: 369.6 KB
DOWNLOAD the software updates, drivers, plug-ins, and utilities for which you are eligible
To change your cookie settings or find out more, click here.
If you continue browsing our website or close this banner, you accept these cookies.