Site Search
  • KMX-3901-IN-IP
    10 GigE IP Input Module for the Kaleido-Modular-X Multiviewer
    With the IP input card (KMX-3901-IN-IP) for Kaleido-Modular-X, this Densité 3 frame-based modular multiviewer can now perform monitoring of SMPTE ST 2022-6 video-over-IP using dual 10 GigE IP inputs. A single KMX-3901-IN-IP input card allows monitoring of up to eight SMPTE ST 2022-6 sources, and up to four input cards can be bridged to provide monitoring of up to 32 IP video inputs per multiviewer. The multiviewer provides two outputs via HDMI/SDI, as well by 10 GigE SMPTE ST 2022-6.
    • Features dual-network interfaces supporting 10 GigE SFP+ for short and long reach optical, as well as passive cable assemblies
    • Low processing delay of 1 frame
    • Supports SFP+ for short and long reach optical fiber, as well as 10 GigE copper
    • Integrates with GV Convergent SDN control system
    • Offers full 1+1 redundant 10 GigE ports for up to six HD/SD or three 3G IP video inputs
    • Offers up to eight HD/SD or six 3G IP video inputs in non-redundant aggregation mode
    • Provides dual mosaic IP outputs from KMX-3901-OUT module
    • Supports industry standard SMPTE ST 2022-6 for interoperability
    • Fits in Densité 3 frame, which can house any of the Densité 3 line of processing modules
    • Scales to up to 32 video over IP inputs per single multiviewer by bridging up to 4 modules together
    • Uses Kaleido-Modular-X FlexBridge interconnection to scale the number of inputs, and connect locally or remotely to the output card
    • Integrates with the existing Kaleido-Modular-X for SDI and IP source monitoring on the same multiviewer
    • Mix and match with KMX-3901-IN-8-D and KMX-3901-IN-16-D SDI modules within same frame (see Kaleido-Modular-X datasheet for more information)
    • Works with M3 NVISION router to Kaleido integration cable for SDI inputs
    • Perfect multiviewer for the migration to IP infrastructure
    • Monitor IP and SDI sources on one monitor
    • Small initial investment and size makes this multiviewer perfect for facilities wanting to give IP a try, without giving up their SDI investment
    • A great starting point for IP monitoring, which enables a progression to the largest multiviewing application over IP routing backbone infrastructure
    Ethernet Port
    Physical: Two SFP+ sockets for copper, short reach and log reach fiber
    Standard: IEEE 802.3-2008 10 Gb Ethernet
    IP Standard: SMPTE-2022-6
    Transport: Multicast or unicast
    Video Inputs Over IP
    SDI Standards:
    • SMPTE ST 259-C (270 Mb/s)
    • SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
    • SMPTE ST 424 (2.97, 2.97/1.001 Gb/s)
    Supported formats:
    • SD: 480i59.94, 576i50
    • HD: SMPTE ST 274: 1080i59.94, 1080i50
    • HD: SMPTE ST 296: 720p59.94, 720p50
    • 3G: SMPTE ST 425 level A (mapping 1), level B: 1080p59.94, 1080p50
    MV Outputs Over IP (MV SDI IN)
    Provides SMPTE ST 2022-6 outputs for KMX-3901-OUT-D card SDI outputs
    Physical input: 2 DIN 1.0/2.3 connectors
    SDI Standards:
    • SMPTE ST 424 (2.97, 2.97/1.001 Gb/s)
    Supported formats:
    • SMPTE ST 425 level A (mapping 1) 1080p59.94, 1080p50

    LTC Inputs
    Connector: DIN 1.0/2.3
    Standard: SMPTE 12M-1995 (EBU-3259-E), SMPTE 309M
    Connector: DIN 1.0/2.3
    Standard: SMPTE ST 170, SMPTE ST 318, ITU 624-4 blackburst
    Power: 60W
    Discrete Audio Inputs (Optional)

    • Connector: DIN 1.0/2.3

    Analog Audio:

    • ABT-64A or ABT-128A
    Digital Audio (optional):
    • AES 110Ω: ABT-64D-110 and ABT-128D-110
    • AES 75Ω: ABT-64D-75 and ABT-128D-75
    FlexBridge Coaxial I/O  
    Connector: DIN 1.0/2.3
    Inputs: 2
    Outputs: 2
    Format: 3 Gb/s
    Cable length between two input cards:
    • 10m (33 ft.) (Belden 1694A)
    • 6m (20 ft.) (Belden 1855A)
    Cable length from input card to output card:
    • 50m (164 ft.) (Belden 1694A)
    • 35m (115 ft.) (Belden 1855A)
    KMX-3901-IN-IP-D 10 GigE IP input module for SMPTE ST 2022-6 (3G/HD/SD) sources (license required for 3 Gb/s, see below)
    KMX-3901-IN-IP-D-3+TRP Triple rear connector panel with 2 SFP slots. Compatible with Densite 3+ FR4 only
    Input Options  
    KMX-IN-8-OPT-CSX CC/Subtitling and XDS data license
    KMX-IN-8-OPT-DOLBY License for extraction of Dolby-E metadata
    KMX-IN-8-OPT-3GBPS 3 Gb/s signal format license
    SFP Options  
    SFP-ETH10G-RT-S13-LC Optical 10 GigE cartridge, single-mode 1310 nm, LC/PC connector, 10 km (6.2 mi.)
    SFP-ETH10G-RT-M85-LC Optical 10 GigE cartridge, multimode 850 nm, LC/PC connector, 300m (984 ft.)

    See more related documents