KudosPro LC2000-IQ & LC4000-IQ
Modular Motion Adaptive Standards Converters
The independent dual-channel LC2000-IQ and independent quad-channel LC4000-IQ are highly cost-effective, linear motion adaptive standards converters. The are designed for high density international program distribution and international TV and video back-up channels.
KudosPro-IQ includes two single-width IQ Modular slots that are accessed via the rear panel. This allows two single-width IQ modules or one double-width module to be installed. Installation is simple, and is via the rear panel. Connectivity between the KudosPro interface and the IQ module is achieved via external connection. The installed IQ modules can be controlled and monitored by RollCall in the same way as KudosPro....

FEATURES
- Linear motion adaptive SD/HD/3G high-density frame rate conversion
- SD/HD/3G up/down/crossconversion
- Independent dual channel (LC2000-IQ) and quad channel conversion (LC4000-IQ)
- Flexible video and audio I/O configuration
- 16-channel embedded audio processing for each video channel
- Continuous output when input standard switches
- HDMI monitor output
- Dual PSU as standard
- Relay bypass on primary SDI inputs
- Automatic aspect ratio conversion (AFD, VI, L23)
- Powerful picture enhancement tools
- Front panel and remote control via web interface and RollCall
- Closed caption and timecode handling
- Synchronization
- User chosen line for SMPTE ST 2016
- GPI support
- Front panel control lock
- Caption generator
- Logo inserter
- Sidebar keyer
- Clean cut
Optional Features
- Fiber input/output
Applications
- High density international program distribution
- Low-cost frame rate conversion
- International TV and video back-up channels
SPECIFICATIONS
Signal Inputs
Serial digital 4x 75Ω SD/HD/3G serial digital with embedded audio
Input standards:
- 3 Gb/s SD-SDI, SMPTE ST 425 level A, level B
- 1.5 Gb/s HD-SDI SMPTE ST 292/SMPTE ST 299
- 270 Mb/s SD-SDI SMPTE ST 259
Reference: 1x loop-through HDTV Tri-sync/SD Bi-sync (blackburst) SMPTE ST 240/SMPTE ST 274
Audio AES: 4x balanced AES inputs – via 25-way D-Type
Audio analog: 4x stereo analog inputs via 25-way D-Type
Signal Outputs
Serial digital 4x 75Ω SD/HD/3G serial digital with embedded audio
Output standards:
- 3 Gb/s HD-SDI, SMPTE ST 425 level A, level B
- 1.5 Gb/s HD-SDI SMPTE ST 292/SMPTE ST 299
- 270 Mb/s SD-SDI SMPTE ST 259
Audio AES: 4x balanced AES outputs – via 25-way D-Type
Audio analog: 2x stereo analog outputs via 25-way D-Type
Input Standards
(auto detect) 525, 625
720 50/59.94/60p
1080 50/59.94/60i
1080 50/59.94/60p (Levels A and B)
720/1080 23.98/24/25/29/30p
1080 23.98/24/25/29PsF
Output Standards
525, 625
720 50/59.94/60p
1080 50/59.94/60i
1080 50/59.94/60p (Levels A and B)
720/1080 23.98/24/25/29/30p
1080 23.98/24/25/29PsF
Conversion Functions
Modes: SD/HD/3G motion compensated
Standards Conversion: Up/down/crossconversion
Conversion linear/motion compensated
Conversion processing
Still process: Detects still images and applies an aperture with full (progressive) vertical frequency response
Enhanced still: Adds field motion detection to still process. Prevents artifacts on moving repetitive patterns.
Manual or Automatic ARC
AFD (SMPTE ST 2016), VI (RP186), WSS (L23)
SD input format: Normal 4:3, Anamorphic 16:9, Letterbox 14:9, Letterbox 16:9
SD output format: Normal 4:3, Anamorphic 16:9, Letterbox 14:9, Letterbox 16:9
Auto zoom: On/Off
Manual zoom: Zoom ±20%
Safe area marker: Off, 16:9, 4:3
Manual controls: size, aspect, pan, tilt
Wide range of ARC presets including 702 sample line mode
Audio Functions
Analog Audio:
- Four pairs of analog inputs are individually available to any or all processing channels
- Two groups (2 pairs) of analogue output are separately assignable to any processing channel
- Headroom +24 dBu; balanced connection
AES Audio:
- Four AES audio inputs are individually available to any or all processing channels
- Four AES audio outputs (48 kHz) are separately assignable to any processing channel
- AES input is auto-detected as PCM (32-96 kHz) or non-PCM (48 kHz locked to relevant video input)
Embedded Audio:
- Each processing channel includes 16-channel embedded audio processing
- PCM audio processing includes channel level gain and delay compensation, as well as channel level routing/shuffle with audio phase inversion
- Non-PCM processing features pair level routing and delay compensation
- Dolby-E data is passed with a delay to match the video and with co-timed audio frame drop or repeat
Metadata
Closed caption CEA608 <> CEA708
Timecode conversions
WST/SMPTE RDD08/SMPTE ST 2031 conversion
Enhancement
Advanced Horizontal Enhancement:
- Frequency band selection (Low, Med, High)
- 4 preset enhancement levels (Soft 2, Soft 1, Normal, Sharp 1, Sharp 2)
- Custom H Gain and H Noise rejection levels
Advanced Vertical Enhancement:
- Frequency band selection (Low, Med, High)
- 5 preset enhancement levels (Soft, Normal, Sharp 1, Sharp 2, Sharp 3)
Horizontal Aperture:
- 5 preset H sharpness levels (Low 2, Low 1, Normal, High 1, High 2)
- 5 preset H detail levels (Soft 2, Soft 1, Normal, Sharp 1, Sharp 2)
Noise reduction: spatial, recursive
System
Pattern Off , Black, Ramp, Bars
Proc amp:
Black Level: +100 to -100 mV (0) in 0.8 mV steps
Contrast: -6 dB to +6 dB (0) in 0.2 dB steps
Saturation: -6 dB to +6 dB (0) in 0.2 dB steps
Y Gamma: 0.4 to 1.7 (1) in 0.1 steps
Freeze: On/Off
Genlock: Reference lock, Input lock (same format), Follow input (same frame rate), Free run
Memories: 16 user memories
Legalizer
EDH support
Communications
Remote control via web interface and RollCall network (IP) and SNMP
Power (Primary and Secondary)
Input voltage range: 100 – 240 VAC, 50/60 Hz 1.5A (max.) via three-pin IEC power socket
Mechanical
Temperature range: 0 to 45° C (32° to 113° F) operating
Cooling: Internal fan, side venting
Weight: Approximately 4.25 kg (9.4 lbs.)
Case type: 1 RU, rack mounting
Dimensions: 44 x 430 x 400 mm (1.7 x 16.9 x 15.7 in.) (HxWxD)
Headphones socket with volume control
GPIO: 8 available
Throughput Delay
Video processing delay:
- Field = 16.7 or 20 ms
- Frame = 33.3 or 40 ms
With scaling active in same frame rate:
- Ref lock/Free run – between 3 and 5 fields + ~200 µs
- Input lock(SDI) – 3 fields + 1 ms
With same standard in & out and sync mode = Enabled:
- Ref lock/Free run – Between ~200 µs and 1 frame + ~200 µs
- Input lock(SDI) – ~1 ms
Frame rate conversion: Any lock mode – 110 ms typical
Audio processing delay (Audio delay = 0 ms)
With scaling active in same frame rate:
- Ref lock/Free run – 1.5 frames
- Input lock – 1 frame + 1 ms
With same standard in & out and sync mode = Enabled:
- Ref lock/Free run – 0.5 frames
- Input lock – ~3 ms
Frame rate conversion: Any lock mode – 110 ms typical
MEDIA GALLERY






ORDERING INFORMATION
6122200
LC2000-IQ Dual channel video & audio processing unit with space for up to two IQ modules. Featuring frame rate/format conversion, frame synchronization, ARC control, noise reduction, side-bar keying, logo insertion, CC, WST and timecode handling, picture enhancement tools, 16-channel audio processing inc gain, delay & shuffling. SDI (BNC or fiber), GPI, balanced AES and analog audio I/O. HDMI monitor output & Dual PSUs.
6124200
LC4000-IQ Quad channel video & audio processing unit with space for up to two IQ modules. Featuring frame rate/format conversion, frame synchronization, ARC control, noise reduction, side-bar keying, logo insertion, CC, WST and timecode handling, picture enhancement tools, 16-channel audio processing inc gain, delay & shuffling. SDI (BNC or fiber), GPI, balanced AES and analog audio I/O. HDMI monitor output & dual PSUs.
Fiber SFP Options for Fiber — A&B
FC1-13TR: Transceiver 1310 nm/Rx
FC1-13T1: Single 1310 nm Tx
FC1-13T2: Dual 1310 nm Tx
FC1-R1: Single Rx
FC1-R2: Dual Rx
FC1-HDBT2: HD-BNC Dual Tx
FC1-HDBR2: HD-BNC Dual Rx
CWDM Tx wavelengths available on request
Note: Fiber SFP type must be ordered in addition to the unit.