HDA-3962
Single/Dual 12G/3G/HD/SD-SDI Distribution Amplifier (DA) with Optional Fiber Connectivity and 12G Relay Input Bypass
The HDA-3962 provides single and dual channel distribution for 12G/3G/HD/SD-SDI signals with flexible routing of inputs to outputs. Flexible output selection enables the HDA-3962 to be used either as a single channel DA with up to 10 outputs, or in dual channel mode with up to five outputs per input.
The HDA-3962 provides up to ten reclocked outputs with automatic equalization for up to 60 meters (197 feet) of cable using Belden 4794R at 12 Gb/s, and 100m (328 feet) at 3 Gb/s and up to 150 meters (492 feet) at 1.5 Gb/s using Belden 1694A cable.
Based on the proven Densité modular framework of over 100 functional cards, the HDA-3962 provides a space-efficient signal distribution...
FEATURES
- Single/dual 12G/3G/HD/SD-SDI inputs
- Flexible selection of inputs allows single or dual channel operation on some rear panels
- Supports bitrates up to 11.88 Gb/s
- Automatic format detection and cable equalization
- Up to 10 12G/3G/HD/SD-SDI with one bypass HD-BNC outputs on the HDA-3962-3DRP-HR rear
- Up to 7 12G/3G/HD/SD-SDI BNC outputs on the HDA-396N-3SRP rear
- Up to 6 12G/3G/HD/SD-SDI BNC outputs on the HDA-396N-3SRP-2IN rear
- Up to 10 12G/3G/HD/SD-SDI HD-BNC outputs on the HDA-396N-3SRP-HF rear
- Optional fiber I/O on the HDA-396N-3SRP-HF rear
SPECIFICATIONS
Electrical Inputs and Outputs
Physical:
8 BNC Connectors:
- 1 in, 7 out (HDA-396N-3SRP)
- 2 in, 6 out (HDA-396N-3SRP-2IN)
12 HD-BNC Connectors:
- 2 in, 10 out (HDA-396N-3SRP-HF)
- 1 in, 10 out with relay bypass for in 1 to out 1 (HDA-3962-3DRP-HR)
SDI standards:
- SMPTE ST 259-C (270 Mb/s)
- SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
- SMPTE ST 424 (2.970, 2.970/1.001 Gb/s)
- SMPTE ST 2082-1:2015 (2.970, 2.970/1.001 Gb/s)
Cable length (Belden 1694A cable):
- 365m (1197 ft.) at 270 Mb/s
- 150m (492 ft.) at 1.485 Gb/s
- 100m (328 ft.) at 2.970 Gb/s
Cable length (Belden 4794R cable): 60m (197 ft.) at 11.88 Gb/s
Return loss:
- >15 dB up to 1.5 GHz
- >10 dB from 1.5 GHz to 3 GHz
Jitter (wideband): <0.2 UI p-p
Rise/fall time:
- <135 ps, 20% to 80%, for HD and 3G
- 400-800 ps, 20% to 80%, for SD
Processing Performance
Processing delay: 7 ns typical
Electrical
Power: less than 12.5W max
NOTE: When using a rear panel that is equipped with a bypass relay (model: HDA-3962-3DRP-HR), performance will be reduced for equipment connected to the output protected by the bypass relay (Output 1).
The total cable length of the bypass relay protected path must not be greater than the maximum input cable length requirement of the receiving equipment. For this, add the cable length of the equipment connected to the card’s input to the cable length of the receiving equipment connected to the output protected by the bypass relay.
The return loss specifications of the bypass relay protected path will be reduced as it depends on the return loss of the receiving equipment connected to the output protected by the bypass relay.
MEDIA GALLERY
ORDERING INFORMATION
Densité 3 Frame
HDA-3962
Single/dual 12G SDI distribution amplifier with EQ and reclocking
HDA-396N-3SRP
Single rear panel with single 1x7 BNCs
HDA-396N-3SRP-2IN
Single rear panel with single 1x6 or dual 1x3 BNCs
HDA-396N-3SRP-HF
Single rear panel with single 1x10 or dual 1x5 HD-BNC with fiber option support
HDA-3962-3DRP-HR
Double rear panel with single 1x10 HD-BNC with relay bypass support on output 1
Fiber Options
SFP-U-R-LC
12G Single RX Fiber with LC/PC
SFP-U-RR-LC
12G Dual Rx Fiber with LC/PC
SFP-U-RT-S13-LC
12G Dual Rx/Tx Fiber 1310 nm with LC/PC
SFP-U-T-S13-LC
12G Single Tx Fiber 1310 nm with LC/PC
SFP-U-TT-S13S13-LC
12G Dual Tx Fiber 1310 nm with LC/PC
SFP-R-LC
Single fiber RX (input) cartridge with LC/PC connector
SFP-RR-LC
Dual fiber Rx (input) cartridge with LC/PC connector
SFP-T-S13-LC
Single fiber TX (output) cartridge at 1310 nm with LC/PC connector
SFP-TT-S13S13-LC
Dual fiber Tx (output) cartridge at 1310 nm with LC/PC connector
SFP-RT-S13-LC
Dual fiber Rx/Tx (input/output) cartridge 1310 nm with LC/PC connector
NOTE: The HDA-3962 can also make use of SFP optical plug-in cartridges from the WDM and CWDM series. Other types of SFP optical plug-in cartridges may be available.
Remote control: GV Orbit, iControl or iControl Solo (version 7.10 or higher required)
DOCUMENTS & DOWNLOADS
DATASHEETS
HDA-3962 Datasheet
The HDA-3962 from Grass Valley provides single and dual channel distribution for 12G/3G/HD/SD-SDI signals with flexible routing of inputs to outputs. Flexible output selection enables the HDA-3962 to be used either as a single channel DA with up to 10 outputs, or in dual channel mode with up to five outputs per input.
The HDA-3962 provides up to ten reclocked outputs with automatic equalization for up to 60 meters (197 feet) of cable using Belden 4794R at 12 Gb/s, and 100m (328 feet) at 3 Gb/s and up to 150 meters (492 feet) at 1.5 Gb/s using Belden 1694A cable.
The HDA-3962 provides up to ten reclocked outputs with automatic equalization for up to 60 meters (197 feet) of cable using Belden 4794R at 12 Gb/s, and 100m (328 feet) at 3 Gb/s and up to 150 meters (492 feet) at 1.5 Gb/s using Belden 1694A cable.
