MAP-3901
3G/HD/SD MetaData & Embedded Audio Processor
The MAP-3901 is the latest generation metadata and audio processor in the Densité family, offering sophisticated audio signal processing on a single 3 RU module. The powerful and versatile processing platform delivers significant value by simultaneously processing up to 56 channels of audio (16 channels of embedded audio from the video, plus others generated internally). Functions include dual downmixing, level control, channel shuffling/mixing and an on-board DSP engine that can run simultaneously with up to two optional Dolby-E decoders, four optional Dolby Digital & Digital Plus encoders, and two optional upmixers (2.0 to 5.1).
FEATURES
Video
- 3G/HD/SD support including 3 Gb/s level A (mapping 1) and level B
- Flexible SD/URS reference input
- Programmable audio/video delay of up to 4.1 seconds (124 frames) in HD
- Bypass relay with MAP-3901-3DRP-R and MAP-3901-3+SRP-R-D rear modules
Metadata
- Four audio metadata insertion and extraction (SMPTE ST 2020 Method A or B)
Audio
- Full audio shuffling and mixing per channel basis
- 56 channels internal audio processing
- 2 audio 5.1 surround downmix to Lt/Rt or Lo/Ro
- Audio delay adjustments of up to 2 seconds to compensate for lip sync
- Up to 2 optional Dolby E decoders
- Up to 2 optional stereo to 5.1 upmixers
- Up to 4 optional Dolby Digital and Digital Plus Encoders
SPECIFICATIONS
Video Input/Output
Signal (1):
- SMPTE ST 259-C (270 Mb/s)
- SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
- SMPTE ST 424 (2.970, 2.970/1.001 Gb/s)
Supported formats:
- SD: 480i59.94, 576i50
- HD: SMPTE ST 274: 1080i59.94, 1080i50
- HD: SMPTE ST 296: 720p59.94, 720p50
- 3G: SMPTE ST 425 level A (mapping 1), level B:1080p59.94, 1080p50 (dual link)
Cable length*:
- 325m (1,066 ft.) Belden 1694A at 270 Mb/s
- 180m (590 ft.) Belden 1694A at 1.485 Gb/s
- 90m (295 ft.) Belden 1694A at 2.970 Gb/s
Return loss:
- OUT 1: > 8 dB up to 3 GHz
- OUT 2:
- > 15 dB up to 1.5 GHz
- > 10 dB at 3 GHz
Jitter:
- HD/SD: <0.2 UI (alignment jitter)
- 3G: <0.4 UI (alignment jitter)
Reference Input
Signal:
- SMPTE ST 170/SMPTE ST 318/ITU 624-4 blackburst
- SMPTE ST 274/SMPTE ST 296 tri-level sync
Return loss: >27 dB up to 5.75 MHz
LTC
Not used
GPIO
Signal (8): Opto-isolated, common ground
Direction: Bidirectional
Connector: DE15
RS-422/ETH
Not used
Video Processing Performance
Signal path: 10 bits minimum
Processing delay: 1 interlaced frame (33 ms @59.94 Hz or 40 ms @50 Hz)
Additional delay: (HD) Up to 4.1 seconds frames upon user selection
Audio Processing Performance
Quantization: 24 bits
Sampling:48 kHz, synchronous
Number of channels: 56
Frequency response: ±0.02 dB (20 Hz to 20 kHz)
SNR:123 dB (A weighted)
THD + N: -138 dB (20 Hz to 20 kHz)
Audio latency: Delay depending on processing options
Audio delay: Up to 2s (1 ms steps) in addition to programmed video delay
Electrical
Power: 25W max.
* Cable length will be reduced when using the output protected by the bypass relay on rears MAP-3901-3DRP-R and MAP-3901-3+SRP-R-D.
MEDIA GALLERY
ORDERING INFORMATION
Densité 3 frame | Description |
MAP-3901 | 3G/HD/SD metadata and embedded audio processor |
MAP-3901-3DRP-R | Double Rear panel with BNC and bypass relay |
MAP-3901-3+SRP-R-D | Single Rear panel with Din and bypass relay for Densité 3+ frame |
Options (Software) | Description |
MAP-3901-OPT-DED-1 | Single Dolby E decoding option |
MAP-3901-OPT-DED-2 | Dual Dolby E decoding option |
MAP-3901-OPT-DDE-1 | Single Dolby Digital Plus encoding option |
MAP-3901-OPT-DDE-2 | Dual Dolby Digital Plus encoding option |
MAP-3901-OPT-DDE-3 | Triple Dolby Digital Plus encoding option |
MAP-3901-OPT-DDE-4 | Quadruple Dolby Digital Plus encoding option |
MAP-3901-OPT-UPMIX-1 | Single Stereo to 5.1 Surround upmix option |
MAP-3901-OPT-UPMIX-2 | Dual Stereo to 5.1 Surround upmix option |
Remote control | GV Orbit, iControl, iControl Solo |