HCP-1801
HD/SD SDI Video and Embedded Audio Control Probe
The HCP-1801 HD/SD control probe integrates many advanced features for monitoring both video and embedded audio signals, including a new macro-block detection option. It offers complete real-time measurement and analysis of signal parameters, as well as flexible alarm thresholds and user-defined profiles. In addition, the probe functions as a distribution amplifier, with a single input and four HD or SD reclocked outputs.
FEATURES
Video standard, presence detection and alarming
- Video format detection
- Video presence/loss
- Multizone freeze detection
- Multizone black detection
- Luma min and max
- White limit max
Closed captioning presence and validity
- CC525 EIA-608-A extract and display
- CEA-708-B presence detection of:
- Primary caption service
- Secondary language service
- Services 3-6
Active Format Description (AFD)
- Detection of active format description (AFD) aspect ratio data
Other Ancillary Data detection and identification
- SMPTE ST 12 HD timecode
- Wide screen signaling (WSS)
- VITC 525/625
- Video line index (VLI)
- Teletext: ETSI EN 3000 706 pages A, B, C, D data detection
Monitoring of up to 16 audio channels of embedded audio
- Signal presence detection
- Signal format validation for each AES audio pair: PCM, AC-3 (Dolby Digital) or Dolby E
- Presence control for each AES audio pair
- Adjustable level, phase and mono signal alarms
Audio parameter alarming
- Loss of sound/audio silence
- Audio min and max levels
- Overload
- Absence of dynamics
- Phase alarm
- Stereo width
- Imbalance
Dolby metadata extract
- Program ID
Audio channel status monitoring and identification
- Format used
- Data type
- Emphasis
- Lock
- Sampling frequency
- Channel mode
- User bits
- Aux bits
- Work length
Extensive profile management
- 5 user-defined profiles can be stored directly in the probe memory
- Fully-configurable signal alarm thresholds and sensitivities
- Duration adjustable granularity range from 0 to 90 seconds
- Number of occurrences within period ranging between 1 minute and 24 hours
- Remote configuration with iControl software
- For added configuration convenience, the active profile of an HCP-1801 module can be copied to other cards
Transmission over IP for display and listening
- Thumbnails with adjustable picture size, quality and transmission rate
- Alarms and status
- VITC, closed captioning, V-chip, WSS, XDS, AFD, VLI, and Dolby E
- Audio level and phase meters on up to 4 simultaneous AES audio pairs
- Audio overload counter
- Selectable HD or SD video test pattern
Input/output
- Supports SMPTE ST 259-C digital video signal with embedded SMPTE ST 272 digital audio in the following formats:
- HD 1080i (SMPTE ST 274) at 59.94 and 50 Hz
- HD 720p (SMPTE 296M) at 59.94 and 50 Hz
- SD 525i (SMPTE ST 125) at 59.94 Hz
- SD 626i (ITU-R BT.656) at 50 Hz
- One input, four outputs
Remote control and status
- On card status LED
- Current and latch status for remote reporting
SPECIFICATIONS
Video Input
- HD signal:
- SMPTE ST 292 (1.485,1.485/1.001 Gb/s) with embedded audio (SMPTE ST 299)
- 1080i (SMPTE ST 274) at 59.94 and 50 Hz
- 720p (SMPTE ST 296) at 59.94 and 50 Hz
- SD signal:
- SMPTE ST 259-C (270 Mb/s) with embedded audio (SMPTE ST 272)
- 525i (SMPTE ST 125) at 59.94 Hz
- 625i (ITU-R BT.656) at 50 Hz
- Input cable length:
- HD: 110m (360 ft.) Belden 1694A at 1.485 Gb/s
- SD: 250m (820 ft.) Belden 1694A up to 270 Mb/s
- Return loss: >15 dB up to 1.5 GHz
Serial Digital Outputs (4)
- Signal:
- Reclocked SMPTE ST 292 (1.485, 1.485/1.001 Gb/s) with embedded audio (SMPTE ST 299)
- Reclocked SMPTE ST 259-C (270 Mb/s) with embedded audio (SMPTE ST 272)
- Return loss: >15 dB up to 1.5 GHz
- Added jitter: <0.2 UI p-p (wideband)
Processing Performance Serial digital outputs (4)
- Signal path: 10 bits
- Latency: <6 ns
Electrical
- Power: 4W
MEDIA GALLERY
ORDERING INFORMATION
Densité 2 frame | Densité 3 frame | Description |
HCP-1801 | HCP-1801-3RU | HD/SD serial digital video control probe with embedded audio |
HCP-1801-SRP | HCP-1801-SRP-3RU | Single rear connector panel |
Options
HCP-1801-OPT-MBD
Macro-block detection for the HCP-1801 probe
Remote control
iControl, RCP-200
Accessories
DENSITÉ-CPU-ETH2
Ethernet controller card for Densité frame