GPI-1501
GPI I/O Module
The GPI-1501 is a 2 RU Densité card which provides 20 dedicated general purpose interface (GPI) inputs plus eight terminals that can be individually configured, either as a GPI input or GPI output. When paired with a GV Orbit or iControl application server, the GPI-1501 provides alarm aggregation from older devices that do not offer Ethernet port connectivity. The application server can report alarm status information to operators via GV Orbit, iControl or SNMP. It can also trigger external events, such as selecting an alternate source. The card can also interface with automation systems via its GPI outputs for the control of legacy devices. Each incoming GPI is time stamped with incoming...
FEATURES
- Provides GPI alarm aggregation for older devices, bridging the gap to modern IP enabled control systems
- Interfaces seamlessly with most automation systems
- Alarm aggregation of virtually any GPI enabled device
- Scalable to address large systems
- Time stamped events for accurate logging and root cause analysis
- 20 dedicated GPI inputs and 8 individually configurable as GPI I/O per card
- SMPTE 12 LTC timecode input
- SNMP support (status reporting) through a GV Orbit or iControl application server
- Accurate internal clock with NTP protocol support
SPECIFICATIONS
GPI In
- Connector: DB-44
- Number of input: 20 opto-isolated
- Pull-up voltage: 2.3V
- Source current: 2 mA when input shorted
- Low level activation: 0.8V max
- Over voltage: 25V max
- Pulse duration: 8 ms min
GPI Bidirectional
- Connector: DB-44
- Number of I/O: 8
Input Mode
- Pull-up voltage: 2.3V
- Source current: 2 mA when input shorted
- Low level activation: 0.8V max
- Over voltage: 25V max
- Pulse duration: 8 ms min
Output Mode
- Contact closure current: 50 mA max
- Reverse voltage: -15V max
- Reverse current: -50 mA max
- V out low: 0.6V at 1.5 mA
LTC Signal
- Connector: Sharing input 20 of DB-44 GPI's connector
- Signal type: Unbalanced as per SMPTE ST 12 date and time as per SMPTE ST 309
Electrical
Power: 1W
MEDIA GALLERY
ORDERING INFORMATION
| Densité 2 frame | Densité 3 frame | Description |
| GPI-1501 | GPI-1501-3RU | GPI I/O module |
| GPI-1501-SRP | GPI-1501-SRP-3RU | Single rear connector panel |
| GPI-1501-RP-FR1 | Rear panel for the GPI-1501 when use in the Densité 3+ FR1 | |
| Option | Description | |
| GPI-1501-TBA | GPI I/O terminal block adapter | |
| Remote control | iControl, iControl Solo, RCP-200 | |
